| General |
| Material | Sheet steel, 1.5 mm |
| Surface protection | Structured lacquer |
| Colour | RAL 7035 |
| Scope of delivery | Including mounting hardware |
| Number of required cable entry flanges | 3 |
| Suitable for | Width: = 850 mm, Depth: = 400 mm |
| PCF/VE (Cradle-to-Gate) | 15.4 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal SV 9681594 is a roof plate for enclosures of the VX series, specifically designed for enclosures with a width of 850 mm and a depth of 400 mm. It serves as a replacement for the standard roof or is used for enclosures that do not come with a roof plate by default. The product is designed for mounting cable entry flanges, thus enabling a structured and secure cabling in the upper section of the enclosure. The construction made of steel sheet with a thickness of 1.5 mm ensures high mechanical stability and durability under industrial conditions.
Applications
The roof plate is primarily intended for use in industrial electrical and IT infrastructures, particularly in enclosures of the VX series. It is used to cover the top of the enclosure while simultaneously enabling the integration of cable entries. Its use is especially beneficial when an enclosure is delivered without a roof or when the existing standard roof needs to be replaced, for example, to improve cable routing or to adapt to specific installation requirements.
Functions and Equipment in Detail
The roof plate features a structured coating in the colour RAL 7035, providing a uniform surface finish and good resistance against mechanical stress and environmental influences. The surface is designed for use in industrial environments and protects the steel sheet from corrosion. The product is delivered including fastening material, enabling installation without additional purchases. The fastening is carried out at the designated mounting points of the enclosure.
Technology Explained Simply
The roof plate is made of 1.5 mm thick steel sheet, providing sufficient strength for use in enclosures. The structured coating ensures a uniform, non-slip surface and improves resistance against dirt and mechanical stress. The colour RAL 7035 is a grey, neutral tone that integrates well in industrial environments. Installation is done using the included fastening elements, which are mounted directly to the enclosure. The design allows for three cable entry flanges, enabling flexible and orderly cable connections.
Compatibility and Accessories
The roof plate is specifically designed for enclosures of the VX series with dimensions width 850 mm and depth 400 mm. It is compatible with cable entry flanges that are installed into the designated openings. Suitable accessories available in the range include transport eyes for VX, TS and SE enclosures, which can be helpful during shipping and installation phases.
Mounting and Installation
Mounting of the roof plate is carried out after removing the existing roof or for enclosures without a roof. The fastening material included in the delivery scope is attached to the designated mounting points on the enclosure. The positioning of the roof plate is done so that the openings for the cable entry flanges are correctly aligned. Mounting is possible without special tools, although the use of a screwdriver or electric screwdriver is recommended for efficient fastening.
Advantages in Operation
The roof plate provides a stable and durable cover for the top of the enclosure, protecting against dust, moisture and mechanical impacts. The integrated openings for three cable entry flanges enable orderly and secure cabling, which simplifies maintenance and inspection of the installation. Using the roof plate contributes to improving the structure and reliability of the enclosure installation, particularly in environments with increased requirements for mechanical strength and cable routing.