| General |
| Material | Sheet steel, 1.5 mm |
| Surface protection | Structured lacquer |
| Colour | RAL 7035 |
| Scope of delivery | Including mounting hardware |
| Number of required cable entry flanges | 8 |
| Suitable for | Width: = 600 mm, Depth: = 800 mm |
| PCF/VE (Cradle-to-Gate) | 15.2 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal SV 9681568 is a roof plate for enclosures of the VX series, specifically designed for an enclosure width of 600 mm and a depth of 800 mm. It serves as a replacement roof for enclosures originally delivered without a roof plate, or as a substitute for the standard roof on other enclosure models. The product is made of
steel sheet with a wall thickness of 1.5 mm, providing a robust and stable construction for use in industrial environments. The surface is coated with
structured paint, ensuring high mechanical resistance and good resistance against contamination and mechanical stress. The colour corresponds to the standard
RAL 7035, a grey tone commonly used in industrial electrical engineering to enable uniform visual design.
Applications
It can also be used as a replacement for existing standard roofs to allow better integration of cable entries or modified mounting configurations. The dimensions of 600 mm width and 800 mm depth fit exactly to the corresponding enclosure sizes of the VX series, ensuring secure and precise mounting. Its use is particularly suitable in plant engineering, machine building, and industrial control systems, where structured and secure cable routing above the enclosure is required.
Functions and Equipment in Detail
The roof plate is specifically designed for mounting
cable entry flanges. A total of
8 cable entry flanges are required to fully secure the roof plate and enable cable routing. The product is delivered
inclusive of fastening materials, which allow mounting to the enclosure. Fastening is achieved via pre-drilled holes that correspond to the mounting points of the enclosure frame. The structured paint finish provides an even surface that is both aesthetically pleasing and functionally robust.
Technology Explained Simply
The steel sheet with a thickness of 1.5 mm provides sufficient strength to withstand mechanical loads during operation without being unnecessarily heavy. The structured paint finish increases abrasion resistance and prevents dirt or dust from easily accumulating on the surface. The RAL 7035 colour is an industry standard and enables visual harmonization with other components. Mounting is done using the included fastening elements, designed for secure anchoring to the enclosure frame.
Compatibility and Accessories
The roof plate is compatible with enclosures of the VX series with a width of 600 mm and a depth of 800 mm. It is specifically designed for use with cable entry flanges, requiring 8 flanges. Suitable accessories available in the range include transport eyes for VX, TS and SE enclosures, suitable for freight shipping.
Mounting and Installation
Mounting is done by securing the roof plate to the top edge of the enclosure frame using the fastening materials included in the delivery. The holes in the roof plate must be aligned with the corresponding mounting points of the enclosure. Installation does not require special tools, although the use of a screwdriver or electric screwdriver is recommended to ensure even fastening.
Operational Advantages
The roof plate enables structured and secure cable routing above the enclosure, simplifying maintenance and inspection of systems. The use of cable entry flanges ensures orderly cable guidance, reducing the risk of damage or incorrect connections. The robust steel sheet construction ensures long service life and high reliability in industrial use. The uniform colouring in RAL 7035 supports a professional and clean visual design of the installation.