| General |
| Material | Sheet steel, 1.5 mm |
| Surface protection | Cabinet frame: dip-primed, rear panel: dip-primed, externally powder-coated, textured lacquer, base plates: galvanized |
| Colour | RAL 7035 |
| Scope of delivery | Cabinet frame, rear panel, base plates |
| Degree of protection IP according to EN 60 529 | Up to IP 54 (depending on cladding) |
| Test basis | IEC 61 439-1/-2, IEC 61 641 |
| Width | 800 mm |
| Height | 2.200 mm |
| Depth | 800 mm |
| PCF/VE (Cradle-to-Gate) | 162.6 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal VX 9680.828 is a modular enclosure made of sheet steel with dimensions width 800 mm, height 2,200 mm and depth 800 mm. It belongs to the baying system VX25 and is designed for use in industrial environments where a modular, flexible and robust enclosure solution is required. The enclosure is manufactured from 1.5 mm thick sheet steel, with the enclosure frame and rear panel being dip-primed. The rear panel is externally powder-coated with a textured lacquer, and the base plates are galvanized. The colour corresponds to RAL 7035, a grey-black tone commonly used in industrial applications. The enclosure is designed for use in baying configurations and allows modular expansion through additional elements.
Applications
The enclosure is suitable for use in industrial plants, such as in manufacturing, automation technology or power supply. It serves as a housing for electrical switchgear, controls, distributors or other electronic components. The modular design enables flexible adaptation to different requirements, for example by installing partial doors, front trim panels or baying connectors. The protection rating IP 54, which is achieved depending on the cladding, makes it suitable for indoor use where a certain level of protection against dust and splashing water is required.
Functions and Equipment in Detail
The delivery includes the enclosure frame, rear panel and base plates. These components form the basic structure of the enclosure. The processing from sheet steel with a thickness of 1.5 mm ensures high mechanical stability. The surface treatment – dip-primed frame, powder-coated rear panel and galvanized base plates – provides corrosion protection and durability. The colour RAL 7035 is standard and offers good visibility and coordination in industrial environments.
Technology Explained Simply
The protection rating IP 54 means that the enclosure is protected against dust (dust-tight) and against splashing water (in any direction). This is sufficient for many industrial applications, especially if the enclosure is not operated outdoors or in damp environments. The test basis IEC 61 439-1/-2 and IEC 61 641 refers to the standards for low-voltage switchgear and controlgear enclosures, confirming compliance with European safety and quality requirements. The indication Cradle-to-Gate for the PCF value (162.6 kg CO2 eq) refers to the climate impact of production up to the completion of the product, with the value being classified as approximately calculated and self-declared in category B.
Compatibility and Accessories
The enclosure is compatible with various accessories that allow individual adaptation. These include, for example, plinth corner pieces with plinth trim panels, levelling feet with an adjustment height of 18 to 43 mm, SV partial doors in various heights (e.g. 150 mm, 600 mm, 1800 mm), SV front trim panels for the front (e.g. IP 54, W x H: 800x300 mm) as well as baying connectors and baying brackets for connecting multiple enclosures. Side panels and baying panels are also available to enable a closed or modular arrangement. The partial doors and front trim panels allow targeted access to specific areas of the enclosure without having to open the entire enclosure.
Mounting and Installation
Mounting is done by screwing together the individual components. The base plates are included in the delivery and enable stable fixation to the floor. The use of levelling feet can improve the alignment of the enclosure, especially on uneven floors. Baying connectors and baying brackets facilitate the connection of multiple enclosures into a single unit. The modular design allows for step-by-step expansion or adaptation of the enclosure configuration.
Advantages in Operation
The enclosure offers high mechanical stability due to the 1.5 mm thick sheet steel and a durable surface treatment. The modular construction enables flexible use and expansion. The protection rating IP 54 provides sufficient protection for many industrial applications. Compatibility with various accessories allows customized adaptation to specific requirements. Compliance with standards IEC 61 439-1/-2 and IEC 61 641 ensures safety and reliability of the enclosure during operation.