Rittal 9680826, EAN: 4028177929760

Rittal 9680826 VX 9680.826 enclosure 800x2200x600 mm

Industrial Material > Enclosures / Chassis > Switchboard-Systems

Rittal 9680826 VX 9680.826 enclosure 800x2200x600 mm

Lieske Part No. 1441042
Mfg Part No 9680826
EAN-Code 4028177929760
Manufacturer Rittal
Here only 411,70 EUR
489,92 EUR incl. VAT

Further information for Rittal 9680826 VX 9680.826 enclosure 800x2200x600 mm

General
MaterialSheet steel, 1.5 mm
Surface protectionCabinet frame: dip-primed, rear panel: dip-primed, externally powder-coated, textured lacquer, base plates: galvanized
ColourRAL 7035
Scope of deliveryCabinet frame, rear panel, base plates
Degree of protection IP according to EN 60 529Up to IP 54 (depending on cladding)
Test basisIEC 61 439-1/-2, IEC 61 641
Width800 mm
Height2.200 mm
Depth600 mm
PCF/VE (Cradle-to-Gate)146.3 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal VX 9680.826 is a modular enclosure from the bayed enclosure system series VX25, designed for use in industrial applications. It features dimensions of width 800 mm, height 2,200 mm, and depth 600 mm, and is manufactured from steel sheet with a wall thickness of 1.5 mm. The enclosure frame is dip-primed, the rear panel is also dip-primed and externally powder-coated with textured lacquer, while the base plates are galvanized. The color is RAL 7035, a gray-black tone that integrates well in industrial environments. The enclosure is designed for modular construction, where the cladding can achieve protection rating IP 54, which is dust-tight and splash-proof, making it suitable for indoor use in environments with increased contamination risk. The construction and safety testing are based on IEC 61 439-1/-2 and IEC 61 641.

Applications

The VX 9680.826 is suitable for use in industrial electrical installations where a modular, flexible, and robust enclosure solution is required. It is commonly used in production plants, automation systems, or for the installation of control and distribution technology. The modular design allows for individual adaptation to specific requirements, such as integration of partial doors, front trim panels, or baying connectors. The IP 54 protection rating makes it suitable for environments with dust exposure or occasional splash water, for example in workshops or machine installations.

Functions and Equipment in Detail

The enclosure consists of the enclosure frame, rear panel, and base plates, all included in the delivery scope. The construction from 1.5 mm steel sheet ensures high mechanical stability. The surface treatment with dip priming and powder coating provides good corrosion protection. The galvanized base plates offer additional protection against moisture and corrosion in the lower area. The color RAL 7035 is a standardized gray used in many industrial environments. The IP 54 protection rating depends on the cladding, meaning the exact protection class is determined by the doors, front trim panels, or other components used.

Technology Explained Simply

The IP 54 protection rating means the enclosure is protected against dust and splashing water. This is particularly important in environments where devices are not fully protected from external influences but still require high reliability. The testing basis IEC 61 439-1/-2 refers to safety requirements for low-voltage switchgear and controlgear, while IEC 61 641 defines requirements for enclosures in industrial applications. The use of 1.5 mm thick steel sheet ensures sufficient strength to withstand mechanical loads and vibrations during operation. The powder coating with textured lacquer improves surface quality and resistance to mechanical damage.

Compatibility and Accessories

The VX 9680.826 is part of the VX25 baying system and can be extended with various accessories. These include, for example, SV partial doors in various heights (e.g., 150 mm, 200 mm, 1600 mm, 1800 mm) as well as front trim panels for the lower half of the enclosure in IP 54 or IP 2X. Plinth corner pieces with trim panels, side or front/rear plinth trim panels, as well as baying connectors and baying brackets enable connection to additional enclosures. Additionally, roof plates with IP 55 are available, providing an additional protective layer against weather influences. These components allow for individual design and adaptation to specific requirements of the installation.

Mounting and Installation

Mounting is done by screwing together the individual components. The enclosure frame is connected to the rear panel and base plates. The use of levelling feet (e.g., M12 with adjustment height 18–43 mm) allows for level positioning on uneven surfaces. The modular design simplifies installation, as individual modules can be mounted independently and then connected together.

Advantages in Operation

The enclosure offers high mechanical stability and good corrosion protection due to the surface treatment. The modular design allows flexible adaptation to different requirements, simplifying maintenance and expansion of the installation. The IP 54 protection rating ensures reliable operation in environments with increased contamination risk. The use of standardized components from the VX system simplifies planning and integration into existing installations. The PCF values (Cradle-to-Gate) amount to 146.3 kg CO2 eq per packaging unit, where class B indicates that the value is approximately calculated based on product weight and is self-declared. This value serves as a reference for the environmental balance of the product, without claiming to be a complete life cycle analysis.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1441042
qrcode für Rittal 9680826 VX 9680.826 enclosure 800x2200x600 mm