Rittal 9680628, EAN: 4028177929715

Rittal 9680628 VX 9680.628 enclosure 600x2200x800 mm

Industrial Material > Enclosures / Chassis > Switchboard-Systems

Rittal 9680628 VX 9680.628 enclosure 600x2200x800 mm

Lieske Part No. 1441030
Mfg Part No 9680628
EAN-Code 4028177929715
Manufacturer Rittal
Here only 387,55 EUR
461,18 EUR incl. VAT

Further information for Rittal 9680628 VX 9680.628 enclosure 600x2200x800 mm

General
MaterialSheet steel, 1.5 mm
Surface protectionCabinet frame: dip-primed, rear panel: dip-primed, externally powder-coated, textured lacquer, base plates: galvanized
ColourRAL 7035
Scope of deliveryCabinet frame, rear panel, base plates
Degree of protection IP according to EN 60 529Up to IP 54 (depending on cladding)
Test basisIEC 61 439-1/-2, IEC 61 641
Width600 mm
Height2.200 mm
Depth800 mm
PCF/VE (Cradle-to-Gate)137.5 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal VX 9680.628 is a modular enclosure made of sheet steel with dimensions width 600 mm, height 2.200 mm and depth 800 mm. It belongs to the bayed enclosure system VX25 and is designed for use in industrial plants where a modular and flexible division of the enclosure interior is required. The enclosure is manufactured from 1.5 mm thick sheet steel, with the enclosure frame and rear panel being dip-primed. The rear panel is additionally externally powder-coated with a textured lacquer, and the base plates are galvanized. The colour is RAL 7035, a grey-black tone commonly used in industrial electrical engineering.

Applications

The enclosure is designed for use in industrial environments, particularly in production plants, automation systems or for the installation of control and distribution technology. The modular design allows for flexible adaptation to different requirements, such as the installation of partial doors, front trim panels or additional side panels. The protection rating IP up to 54 (depending on cladding) makes it suitable for indoor use where a certain level of protection against dust and splashing water is required. The test basis IEC 61 439-1/-2 and IEC 61 641 ensures compliance with international standards for switchgear and distribution enclosures.

Functions and equipment in detail

The delivery scope includes the enclosure frame, rear panel and base plates. These components form the basic structure of the enclosure, intended for the installation of electrical components, wiring or control elements. The use of sheet steel with a thickness of 1.5 mm ensures high mechanical stability and resistance to mechanical stress. The surface treatment with dip priming and powder coating provides good corrosion protection, especially in damp or slightly aggressive environments.

Technology explained simply

The protection rating IP 54 means that the enclosure is protected against dust and splashing water to a limited extent. This is particularly relevant when the enclosure is installed in areas where no direct moisture or heavy dust accumulation is expected. The note “depending on cladding” means that the actual protection class is influenced by the type of doors, front trim panels or other coverings used. The standards IEC 61 439-1/-2 and IEC 61 641 refer to the construction and testing of switchgear and distribution enclosures, ensuring the safety and reliability of the product.

Compatibility and accessories

The enclosure is designed for use with various accessories of the VX system. These include, for example, SV partial doors in various heights (e.g. 600x1000 mm, 600x800 mm, 600x1200 mm, 600x1800 mm, 600x150 mm, 600x300 mm, 600x1400 mm, 600x400 mm), SV front trim panels (e.g. bottom, IP 54, W x H: 600x300 mm or IP 2X, W x H: 600x300 mm), SV roof plates for cable entry (width 600x800 mm), plinth corner pieces with plinth trim panels (e.g. 8660002, 8660024), plinth trim panels (e.g. 100 mm, 200 mm, side 100x800 mm, 200x800 mm), VX side panels (for HT 2200x800 mm, screwable) as well as VX baying connectors (external, sheet steel, 1200 mm). These elements allow individual adaptation of the enclosure to specific requirements regarding accessibility, cable management and external design.

Mounting and installation

Mounting is done by screwing together the individual components. The enclosure frame forms the load-bearing structure to which the rear panel and base plates are attached. The use of levelling feet (e.g. M12, adjustment height 18–43 mm, 4 pieces) enables a level and stable positioning of the enclosure. The modular design allows for flexible arrangement of components within the enclosure, with the positioning of partial doors, front trim panels or other elements being variable according to requirements.

Advantages in operation

The enclosure offers high mechanical stability and good corrosion protection due to the surface treatments used. The modular construction allows flexible adaptation to different applications, thereby facilitating maintenance and expansion of the installed technology. Compliance with the standards IEC 61 439-1/-2 and IEC 61 641 ensures safety and reliability in operation. The protection rating IP 54 (depending on cladding) provides sufficient protection for indoor use with moderate environmental conditions. The PCF value of 137.5 kg CO2 eq (Cat B) indicates the environmental impact of the product over its life cycle from raw material extraction to manufacturing (Cradle-to-Gate).
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1441030
qrcode für Rittal 9680628 VX 9680.628 enclosure 600x2200x800 mm