Rittal 9680426, EAN: 4028177929739

Rittal 9680426 VX 9680.426 modular enclosure 400x2200x600 mm

Industrial Material > Enclosures / Chassis > Switchboard-Systems

Rittal 9680426 VX 9680.426 modular enclosure 400x2200x600 mm

Lieske Part No. 1440993
Mfg Part No 9680426
EAN-Code 4028177929739
Manufacturer Rittal
Here only 330,05 EUR
392,76 EUR incl. VAT

Further information for Rittal 9680426 VX 9680.426 modular enclosure 400x2200x600 mm

General
MaterialSheet steel, 1.5 mm
Surface protectionCabinet frame: dip-primed, rear panel: dip-primed, externally powder-coated, textured lacquer, base plates: galvanized
ColourRAL 7035
Scope of deliveryCabinet frame, rear panel, base plates
Degree of protection IP according to EN 60 529Up to IP 54 (depending on cladding)
Test basisIEC 61 439-1/-2, IEC 61 641
Width400 mm
Height2.200 mm
Depth600 mm
PCF/VE (Cradle-to-Gate)106.4 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal VX 9680.426 is a modular enclosure from the baying system VX25, designed for use in industrial electrical and automation environments. It features dimensions of width 400 mm, height 2,200 mm, and depth 600 mm, and is manufactured from steel sheet with a thickness of 1.5 mm. The enclosure is designed for modular builds, where cladding and internal fittings can be adapted according to requirements. The surface of the enclosure frame and rear panel is dip-primed, with the rear panel additionally externally powder-coated and finished with a textured lacquer. The base plates are galvanized, providing enhanced corrosion resistance. The color finish is RAL 7035, a standard gray tone commonly used in industrial facilities.

Applications
This enclosure is suitable for use in production plants, manufacturing environments, and industrial control systems. It serves as a base for mounting enclosures equipped with partial doors, front trim panels, or internal partitions. The modular design allows for flexible adaptation to various requirements, such as integrating controls, power electronics, or safety systems. The protection rating IP 54 (depending on cladding) makes it suitable for areas where dust and splashing water are present, although no continuous water exposure or high humidity is expected.

Functions and Equipment in Detail
The delivery includes the enclosure frame, rear panel, and base plates. These components form the basic structure of the enclosure and enable stable mounting. The use of steel sheet with 1.5 mm thickness ensures sufficient mechanical strength to safely support components mounted inside the enclosure. The dip-primed surface of the frame and rear panel provides a good base for subsequent coating and increases corrosion resistance. The powder-coated and textured outer surface of the rear panel enhances visual appearance and offers additional protection against environmental influences.

Technology Explained Simply
The IP 54 protection rating means the enclosure is protected against dust (dust-tight) and splashing water (protection against splashing water). This protection class is sufficient for many industrial environments where direct moisture or high air humidity is not prevalent. The test basis IEC 61 439-1/-2 and IEC 61 641 refers to standards for low-voltage switchgear and controlgear, as well as enclosures in industrial electrotechnics. The Cradle-to-Gate value in the PCF (106.4 kg CO2 eq per packaging unit, category B) describes the climate footprint of the product from raw material extraction to completion at the manufacturer’s site. This value is approximately calculated and self-declared, meaning it is estimated based on the product’s weight.

Compatibility and Accessories
The enclosure is part of the baying system VX25 and can be combined with various accessories to enhance functionality and safety. Compatible components include levelling feet M12 with an adjustment height of 18 to 43 mm, SV roof plates (IP 55), SV partial doors in various heights (e.g. 200 mm, 1000 mm, 1600 mm, 1800 mm), and SV front trim panels in various sizes (e.g. 400x100 mm, 400x300 mm) for the upper and lower front sides. Additionally, plinth corner pieces with trim panels (heights 100 mm and 200 mm), plinth trim panels (side, 100 mm and 200 mm), VX side panels (screwed), and baying connectors (external, 1200 mm) are available. These elements allow for individual customization and optimization of the enclosure in terms of accessibility, protection, and integration into existing installations.

Mounting and Installation
Mounting is performed by screwing together the individual components. The enclosure frame forms the load-bearing structure to which the rear panel and base plates are attached. The use of levelling feet enables level positioning on uneven surfaces. Baying connectors and side panels support integration into larger enclosure systems. The modular design allows for step-by-step expansion and adaptation to changing requirements.

Advantages in Operation
The enclosure provides a stable and robust base for industrial electrical installations. The modular construction enables flexible adaptation to different applications. The use of 1.5 mm thick steel sheet and special surface treatment ensures long service life and high resistance to environmental influences. Compatibility with a wide range of accessories expands application possibilities and facilitates integration into existing systems. The IP 54 protection rating (depending on cladding) provides sufficient protection for many industrial applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1440993
qrcode für Rittal 9680426 VX 9680.426 modular enclosure 400x2200x600 mm