| General |
| Material | Polyamide, flammability rating according to UL 94-V0 |
| Colour | RAL 7035 |
| For rail systems with centre spacing | 185 mm |
| Cable exit | Below |
| Mounting method | Screw mounting |
| Number of poles | 3-pole |
| Rated current max. | 1.600 A |
| Rated operating voltage | 690 V, 3~ |
| Note | Wiring exit: switch output or as outgoing line from switching device, suitable for use with switching devices having front-side screw connection, for mounting on perforated busbars. Note: no cover profile is mounted in the device area. |
| Width | 300 mm |
| Height | 652 mm |
| Suitable for busbars | Height: 10 mm |
| Suitable for manufacturer (type) | ABB (Tmax T7 - 1250 A/1600 A), Eaton (NZM4 - 1250 A/1600 A), Schneider Electric (NS - 1250 A/1600 A), Siemens (3VA27 - 1250 A/1600 A) |
| Copper content (kg/piece) | 14,749 |
The Rittal SV 9677715 is a
device adapter for mounting power switches in enclosures. It serves as an
adapter component between the switching device and the busbar system, ensuring secure and standardized fastening. The adapter is designed for busbar systems with a center-to-center spacing of
185 mm and enables integration of switches from various manufacturers into existing switchgear. It is specifically designed for use with switching devices featuring front-side screw connections and is mounted using
screw fastening onto punched busbars.
Applications
The device adapter is intended for use in industrial electrical installations, particularly in enclosures where power switches from manufacturers ABB, Eaton, Schneider Electric, and Siemens are installed. It is suitable for installations with a
rated current up to 1,600 A and a
rated operating voltage of 690 V, 3~. The construction allows use in installations subject to high electrical loads and is designed for switchgear with high safety requirements. Mounting is performed on busbars with a height of
10 mm, which must be punched to enable screw fastening.
Functions and Equipment in Detail
The adapter is made of
polyamide and meets flammability requirements according to
UL 94-V0, ensuring high flame resistance and self-extinguishing properties. The color is
RAL 7035, a standard gray tone commonly used in industrial environments. The
cable exit is at the bottom, meaning the outgoing cable from the switching device runs downward, optimizing cable routing and space requirements in the enclosure. The
number of poles is 3-pole, which is standard for three-phase AC installations. The design ensures that no cover profile may be mounted in the area of the device, to guarantee safe and unobstructed mounting and maintenance.
Technology Explained Simply
The device adapter acts as a mechanical interface between the switching device and the busbar system. It transfers the loads from the switch to the busbar via screw fastening. The use of polyamide ensures high mechanical stability and heat resistance, while the UL 94-V0 approval enhances safety at elevated temperatures or in case of fire. The dimensions of
300 mm width and 652 mm height are aligned with standard dimensions of power switches to enable compact and secure mounting. The combination of screw fastening and precise adaptation to 185 mm spacing ensures stable and vibration-resistant mounting.
Compatibility and Accessories
The adapter is compatible with power switches from manufacturers ABB (Tmax T7 - 1250 A/1600 A), Eaton (NZM4 - 1250 A/1600 A), Schneider Electric (NS - 1250 A/1600 A), and Siemens (3VA27 - 1250 A/1600 A). It is specifically designed for switches with front-side screw connections. As accessories, shock protection covers for device adapters (e.g., SV 9677794 for Eaton) and connection sets for device adapters (e.g., for LS) are available, providing additional safety and better integration into existing installations.
Mounting and Installation
Mounting is performed by screw fastening onto punched busbars with a height of 10 mm. Installation requires precise alignment of the adapter to the busbar, ensuring center-to-center spacing of 185 mm. Cable exits are at the bottom, so cable routing proceeds downward. It is important to ensure that no cover profile is mounted in the area of the device, to avoid hindering mounting and maintenance.
Operational Advantages
The device adapter enables standardized and secure mounting of power switches from various manufacturers within a single enclosure. The use of polyamide and UL 94-V0 approval increases safety and service life of the device. Clear dimensions and screw fastening ensure stable mounting, even under high mechanical loads. Compatibility with multiple manufacturers reduces the number of required adapter types and simplifies planning and maintenance of switchgear. The copper content of 14.749 kg per unit indicates material quality and electrical conductivity of the integrated conductors.