| General |
| Material | Duroplastic polyester |
| Scope of delivery | Including mounting brackets and screws |
| Suitable for busbars | flat copper busbars |
| Number of poles | 3-pole, 4-pole |
The Rittal SV 9674416 is a
busbar holder for the distribution busbar system in the
switch disconnector field. It is designed for the secure mounting of flat copper busbars with dimensions 60 mm width and 10 mm height. The product is designed for
3-pole and
4-pole configurations and enables structured and stable installation of busbars in enclosures, particularly in systems with switch disconnectors. The holder is made of
duroplastic polyester, a robust plastic that withstands mechanical stress and industrial operating conditions.
Applications
The busbar holder is used in industrial electrical engineering where reliable and secure mounting of busbars is required. It is specifically intended for the switch disconnector field, i.e., areas where switch disconnectors, fuses, or other switching and protection devices are mounted. The holder is used in enclosures, distribution boxes, or other electrical distribution systems where flat copper busbars serve as main conductors. The dimensions of the compatible busbars (60x10 mm) are standardized and commonly used in medium to high-power installations.
Functions and Equipment in Detail
The holder includes
mounting brackets and screws in the delivery scope, enabling direct mounting to enclosure walls or within the enclosure frame. The mounting components are designed to ensure a firm and vibration-resistant anchoring. The holder’s construction ensures the busbar is precisely positioned and secured against displacement. The 3- and 4-pole configuration allows adaptation to different switching arrangements, such as three-phase or four-wire systems.
Technology Explained Simply
The holder is made of duroplastic polyester, a thermoplastic material suitable for electrical distribution systems due to its high strength, heat resistance, and chemical resistance. The material selection ensures long service life under industrial conditions. Mounting is done using the included brackets and screws, which are attached directly to the enclosure walls or frame. The busbar is inserted into the holder and secured by the mounting components. The design is engineered to absorb mechanical stress on the busbar and ensure a secure electrical connection.
Compatibility and Accessories
The busbar holder is specifically designed for
flat copper busbars with dimensions 60 mm width and 10 mm height. Compatible accessories include the
busbar E-Cu 60x10 mm with a length of 2400 mm, as well as
end holders for E-Cu 60x10 mm, which are also suitable for 3- and 4-pole configurations. These components can be combined to create a complete distribution busbar system in the switch disconnector field. The use of end holders ensures secure end fixation of the busbars within the enclosure.
Mounting and Installation
Installation involves mounting the included brackets to the enclosure wall or frame using the provided screws. The flat copper busbar is then inserted into the holder and secured by the mounting components. Positioning depends on the switching arrangement and required conductor routing. Installation requires tools and no additional parts. The predefined pole count (3- and 4-pole) allows flexible adaptation to the respective switching configuration.
Operational Advantages
Using the busbar holder ensures stable and secure mounting of busbars, increasing the reliability of electrical distribution. The duroplastic polyester material provides high mechanical strength and resistance to industrial influences. Compatibility with standardized flat copper busbars (60x10 mm) and accessories such as end holders simplifies planning and implementation of switching systems.