Rittal 9666966, EAN: 4028177929777

Rittal 9666966 VX 9666.966 installation distributor 1100x2000x400 mm

Industrial Material > Enclosures / Chassis > Enclosures

Rittal 9666966 VX 9666.966 installation distributor 1100x2000x400 mm

Lieske Part No. 1440996
Mfg Part No 9666966
EAN-Code 4028177929777
Manufacturer Rittal
Here only 722,20 EUR
859,42 EUR incl. VAT

Further information for Rittal 9666966 VX 9666.966 installation distributor 1100x2000x400 mm

General
Materialsteel sheet
Surface protectionCabinet frame: dip-primed, door(s), roof, rear panel: dip-primed, externally powder-coated, textured lacquer, base plates: galvanized
ColourRAL 7035
Scope of deliveryCabinet frame, door(s), right-hinged door, reversible to left, base plates, rear panel, roof sheet, lock: 3 mm double bar
Number of doors2
NoteFor 600 mm wide installation distribution boards VX base cabinets; for a base height of 200 mm, 2 units of base corner pieces, 100 mm, and base covers, 100 mm, are required
Degree of protection IP according to IEC 60 529IP 55
NEMA degree of protectionNEMA 12
Test basisIEC 61 439-1/-2
Width1.100 mm
Height2.000 mm
Depth400 mm
PCF/VE (Cradle-to-Gate)359.7 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal VX 9666.966 is an installation distributor (ISV) from the bayed enclosure series VX25, designed for use in industrial and technical installations. The enclosure made of sheet steel offers a robust structure with dimensions 1,100 mm width, 2,000 mm height, and 400 mm depth. It is equipped with two doors, which are standard right-hinged, but can be changed to left-hinged. The surface of the enclosure frame is dip-primed, while doors, roof, rear panel, and all externally visible surfaces are coated with a powder-coated textured paint in the color RAL 7035. The base plates are galvanized to ensure corrosion protection. The unit is intended for indoor use and provides a high level of protection against dust and splashing water.

Applications

The VX 9666.966 is suitable as an installation distributor in industrial environments where secure and accessible mounting of electrical components, such as switching devices, wiring, or controls, is required. It is part of a modular bayed system, enabling flexible expansion and adaptation to different requirements. The construction is suitable for use in production plants, power supply systems, or building automation, where high mechanical stability and protective function are necessary.

Functions and Equipment in Detail

The enclosure features two doors equipped with a 3 mm double-barrel lock to ensure secure access to internal components. The doors can be hinged on the left or right side as required, allowing flexible installation in rows or against walls. The delivery scope includes the enclosure frame, doors, base plates, rear panel, roof plate, and locking mechanism. The construction is prepared for use with ISV expansion modules, enabling modular expansion.

Technology Explained Simply

The protection rating IP 55 according to IEC 60 529 ensures protection against dust (not completely dust-tight, but sufficient to not impair function) and against splashing water from any direction. This makes the unit suitable for use in environments where occasional moisture or splashing water may occur, for example in production halls or outdoor installations with protected mounting. The corresponding NEMA classification is NEMA 12, which describes protection against dust, splashing water, and light spraying. The test basis is IEC 61 439-1/-2, confirming compliance with standards for low-voltage switchgear and controlgear assemblies.

Compatibility and Accessories

The VX 9666.966 is part of the modular VX system and can be expanded with various accessories. These include cable entry flanges in various sizes (e.g. M25/32/40/50/63) as well as plinth corner pieces and plinth trim panels for an increased plinth height of 200 mm. For mounting components, mounting profiles and deep cross-braces are available. Additionally, baying connectors and baying brackets can be used to connect multiple enclosures. For secure locking, various comfort handles are available, including models for lock inserts, half cylinders, security inserts, or padlocks.

Mounting and Installation

Mounting is done by screwing together the individual components. The doors are already fitted with the locking mechanism and can be mounted on the left or right side as required. The base plates are designed for stable fixation to the floor. When installing multiple enclosures in a row, baying connectors and brackets can be used to ensure a uniform front. The use of plinth corner pieces and trim panels is required for an increased plinth height of 200 mm.

Operational Advantages

The VX 9666.966 offers high mechanical stability and reliable protection for installed components. The modular design enables flexible adaptation to different requirements. The powder-coated surface in RAL 7035 ensures an even and durable coating that resists corrosion and mechanical stress. The IP 55 protection rating ensures safe operation in environments with increased humidity or dust exposure. The use of standard modules and accessories simplifies maintenance and system expansion.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1440996
qrcode für Rittal 9666966 VX 9666.966 installation distributor 1100x2000x400 mm