Rittal 9666916, EAN: 4028177929722

Rittal 9666916 VX 9666.916 installation distributor 850x2000x600 mm

Industrial Material > Enclosures / Chassis > Enclosures

Rittal 9666916 VX 9666.916 installation distributor 850x2000x600 mm

Lieske Part No. 1440187
Mfg Part No 9666916
EAN-Code 4028177929722
Manufacturer Rittal
Here only 563,50 EUR
670,56 EUR incl. VAT

Further information for Rittal 9666916 VX 9666.916 installation distributor 850x2000x600 mm

General
Materialsteel sheet
Surface protectionCabinet frame: dip-primed, door(s), roof, rear panel: dip-primed, externally powder-coated, textured lacquer, base plates: galvanized
ColourRAL 7035
Scope of deliveryCabinet frame, door(s), right-hinged door, reversible to left, base plates, rear panel, roof sheet, lock: 3 mm double bar
Number of doors1
NoteFor 600 mm wide installation distribution boards VX base cabinets; for a base height of 200 mm, 2 units of base corner pieces, 100 mm, and base covers, 100 mm, are required
Degree of protection IP according to IEC 60 529IP 55
NEMA degree of protectionNEMA 12
Test basisIEC 61 439-1/-2
Width850 mm
Height2.000 mm
Depth600 mm
PCF/VE (Cradle-to-Gate)288.3 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal VX 9666.916 is an installation distributor (ISV) made of sheet steel, designed for use in industrial and technical installations. With dimensions width 850 mm, height 2,000 mm and depth 600 mm, it provides sufficient space for mounting distributors, switching devices and other electrical components. The enclosure is single-door and serves as a base for integrating ISV expansion modules. The surface of the enclosure frame is dip-primed, while door, roof, rear panel and base sheets are coated with a powder-coated, structured finish in RAL 7035. The base sheets are galvanized, providing additional corrosion protection.

Applications

The ISV is designed for indoor use where a high degree of protection against dust and splashing water is required. The protection rating IP 55 according to IEC 60 529 and NEMA class 12 make it suitable for environments with increased contamination risk, such as production halls, workshops or manufacturing technology. The test basis IEC 61 439-1/-2 ensures the electrical safety and reliability of the device.

Functions and Equipment in Detail

The enclosure is supplied with an enclosure frame, door, base sheets, rear panel, roof plate and a 3 mm double-barrel lock. The door is standard right-hinged, but can be changed to left-hinged. The construction allows for flexible mounting and adaptation to different requirements. The use of VX base enclosures is intended for 600 mm wide installation distributors.

Technology Explained Simply

The protection rating IP 55 means that the enclosure is dust-tight and protected against splashing water from any direction. This makes the distributor suitable for areas where occasional cleaning with water takes place. The NEMA 12 classification corresponds to a similar protection level and is commonly used in North American installations. The powder-coated surface in RAL 7035 provides a robust, long-lasting coating that withstands mechanical stress and environmental influences.

Compatibility and Accessories

The ISV is part of the VX25 baying system and can be expanded with various accessories. These include, for example, cable entry flanges in various designs, mounting profiles for TS/SE, plinth corner pieces and trim panels, as well as baying connectors and brackets. For securing locks, various comfort handles are available, including models for lock inserts, half cylinders, safety inserts and padlocks. Additionally, mounting kits for VX modules are available, facilitating the installation of devices.

Mounting and Installation

Mounting is done via the pre-fabricated enclosure frame. The door can be mounted on the left or right side according to requirements. The base sheets and roof plate are included in the delivery scope. The use of baying brackets and blocks enables the secure connection of multiple enclosures into a system.

Advantages in Operation

The Rittal VX 9666.916 offers a robust, long-lasting construction with high protection rating. The powder-coated surface in RAL 7035 ensures a uniform, weather-resistant appearance. The modular design allows flexible adaptation to different requirements. The use of standard components from the VX system ensures easy integration into existing installations. The test basis IEC 61 439-1/-2 ensures electrical safety and reliability of the device in operation. The PCF values (Cradle-to-Gate) amount to 288.3 kg CO2 eq per packaging unit, with category B indicating an approximate calculation based on product weight.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1440187
qrcode für Rittal 9666916 VX 9666.916 installation distributor 850x2000x600 mm