| General |
| Market-relevant product changes | (Secondary) |
| Material | Polyamide (PA 6), flammability rating according to UL 94-V0 |
| Colour | RAL 35745, RAL 9005 |
| Electrical connection type | Spring-loaded clamp |
| Rated current max. | 32 A |
| Rated operating voltage | 400 V AC |
| Cable exit | Below |
| Number of poles | 3-pole |
| Suitable for busbar system | RiLineX, RiLine60 |
| Width | 17,8 mm |
| Height | 262,5 mm |
| Depth | 95 mm |
| Connection of stranded wires, fine-stranded with ferrule | 1,5 ‐ 6 mm² |
| Connection of stranded wires, fine-stranded with ferrule AWG | AWG 16 ‐ AWG 10 |
| Connection of stranded wires, stranded | 1,5 ‐ 6 mm² |
| Connection of stranded wires, stranded AWG | AWG 16 ‐ AWG 10 |
| Suitable for busbars | 15 x 5/10 mm, 20 x 5/10 mm, 30 x 5/10 mm |
| Rated voltage | 400 V AC |
| Over voltage category | 4 |
| Pollution degree | 3 |
| Standards | IEC/DIN EN 60 947-3 |
| Rated insulation voltage Ui | 800 V |
| Maximum power dissipation | 3 W |
| Degree of protection IP according to IEC 60 529 | IP 2XB |
| Operating air humidity max. | 90 % |
| Operating temperature range | -5 °C...55 °C |
| Storage temperature range | -25 °C...75 °C |
| Humidity (non-condensing) | 10...90 % |
| Utility category | AC-20B (400 V/100 A) |
| Fuse links | 10 x 38 mm |
| Fire load | 3,565 MJ/m² |
| Copper content (kg/piece) | 0,043 |
| PCF/VE (Cradle-to-Gate) | 6,72 |
The Rittal RX 9364022 is a compact
fuse carrier for 60 mm busbar systems, specifically designed for mounting on RiLineX and RiLine60 rails. It enables the safe and reliable installation and operation of cylindrical fuses with dimensions 10 x 38 mm. The unit provides
optical LED fuse monitoring, visually indicating the status of the inserted fuse, thereby simplifying maintenance and fault diagnosis during operation.
Applications
This device is intended for use in industrial electrical installations, particularly in enclosures and distributions where safe and controlled current interruption is required. It is suitable for applications with a
rated operational voltage of 400 V AC and a
maximum rated current of 32 A. The
usage category AC-20B (400 V/100 A) defines the application range for switching operations in low-voltage environments. The
overvoltage category 4 and
pollution degree 3 make the device suitable for environments with high electrical stress and pollution risks, such as production plants or machine controls.
Functions and Equipment in Detail
The fuses are connected via special
fuse holders, which are lockable when open and sealable when closed. This ensures safe operation and prevents unintended actuation. The
spring-loaded terminals allow for tool-free and quick conductor connection at a 45° angle. The terminals are designed for round conductors with cross-sections from 1.5 to 6 mm² (or AWG 16 to AWG 10), and also allow connection of stranded conductors with wire end ferrules. The maximum conductor cross-section specified in the datasheet is 16 mm², indicating flexible adaptation to various connection conditions.
Technology Explained Simply
The fuse carrier is made of
polyamide (PA 6), classified as flame-retardant according to UL 94-V0. The
protection rating IP 2XB according to IEC 60 529 protects against finger contact and vertical dripping water, which is sufficient for use in enclosed enclosures. The
rated insulation voltage Ui is 800 V, ensuring adequate electrical insulation for use in low-voltage installations. The
power loss is limited to a maximum of 3 W, minimizing thermal load during operation. The operating temperature ranges from -5 °C to 55 °C, with a storage temperature up to 75 °C. The maximum operating air humidity is 90 %, with no condensation allowed.
Compatibility and Accessories
The device is designed for busbars with dimensions 15 x 5/10 mm, 20 x 5/10 mm, and 30 x 5/10 mm. The
semi-automatic rail adaptation enables tool-free snap-on mounting on rails with a thickness of 5 mm or 10 mm. Suitable accessories include the
enclosure protection profile RX 9365025 (L: 1200 mm) and the
mounting clip RX 9365027, which can provide additional securing and protection against contact.
Mounting and Installation
Mounting is tool-free by snapping onto the busbar. The semi-automatic adaptation to rail thickness (5 mm or 10 mm) simplifies installation. Conductor connections are made via the spring-loaded terminals at a 45° angle, ensuring a secure and quick connection. Cable exits are at the bottom, enabling organized cable routing within the enclosure.
Operational Advantages
The fuse carrier offers
complete shock protection without additional screw caps, accelerating installation and increasing safety. The
optical LED monitoring allows for quick visual inspection of the fuse status. The
tool-free mounting and
semi-automatic rail adaptation reduce installation time. The
spring-loaded terminals ensure a maintenance-free and reliable conductor connection. Compliance with the standard
IEC/DIN EN 60 947-3 ensures conformity with applicable safety standards for switching devices.
Color and Material
The device is available in the colors
RAL 35745 (dark gray) and
RAL 9005 (black). The polyamide (PA 6) material offers high mechanical strength and heat resistance, with the UL 94-V0 flammability classification ensuring high fire resistance.
Dimensions
The dimensions are
17.8 mm (width) x 262.5 mm (height) x 95 mm (depth). The compact design enables dense mounting in enclosures and optimizes space requirements.