| General |
| Model | with connection cable |
| Material | Polyamide (PA 6), flammability according to UL 94 |
| Colour | RAL 9005, RAL 35745 |
| Connection wires (AWG) | AWG 6 |
| Rated current (max.) | 65 A |
| Rated current for round conductor | 65 A |
| Rated current for round conductor (UL) | 65 A |
| Electrical values UL (SCCR) | 600 V / 7.5 kA SCCR unprotected AC UL, 100 kA - 600 V, Fuse Class RK5 max. 60 A, JDDZ/7, 22 kA - 600 V, Combination Motor Controller max. 40 A, NKJH/7, 20 kA - 600 V, Circuit Breaker max. 60 A, DIVQ/7, 65 kA - 480 V, Combination Motor Controller max. 52 A, NKJH/7 |
| Cable exit | Below |
| For rail systems with centre spacing | 60 mm |
| Connection cable length | 130 mm |
| Number of poles | 3-pole |
| Suitable for busbar system | RiLineX, RiLine60 |
| Width | 54 mm |
| Height | 239,4 mm |
| Depth | 36,2 mm |
| DIN rail quantity/height | 1 / 10 mm |
| Suitable for busbars | 15 x 5/10 mm, 20 x 5/10 mm, 30 x 5/10 mm |
| Rated voltage | 690 V AC, 600 V AC (UL), 600 V DC (UL) |
| Pollution degree | 3 |
| Standards | IEC 61 439-1/-2, UL 508 |
| Rated impulse voltage Uimp | 8 kV |
| Rated insulation voltage Ui | 1.000 V |
| Degree of protection IP according to IEC 60 529 | IP 2XB |
| Operating air humidity max. | 90 % |
| Operating temperature range | -5 °C...55 °C |
| Storage temperature range | -25 °C...75 °C |
| Humidity (non-condensing) | 10...90 % |
| Fire load | 3,763 MJ/m² |
| Copper content (kg/piece) | 0,145 |
| PCF/VE (Cradle-to-Gate) | 13,53 |
The Rittal RX 9360760 is a
device adapter for mounting control devices such as motor starters or switching devices on
busbar systems with a center-to-center spacing of 60 mm, particularly for the
RiLineX and
RiLine60 systems. It features a
3-pole configuration with a
rated current of 65 A and is equipped with pre-fabricated connection leads that enable quick and secure wiring. The connection leads have a cross-section rating of AWG 6, equivalent to a cable cross-section of 16 mm², and are fitted with a
cable exit at the bottom. The length of the connection leads is 130 mm, providing sufficient connection length for typical installations.
Applications
The adapter is designed for use in industrial electrical installations where secure and rapid mounting of switching and protection devices on busbars is required. It is particularly suitable for installations with a rated voltage up to 690 V AC and 600 V DC (UL), with electrical values certified according to UL 508 and IEC 61 439-1/-2. The
rated insulation voltage Ui is 1,000 V, and the
rated impulse voltage Uimp is 8 kV, ensuring high electrical strength. The
protection rating IP 2XB according to IEC 60 529 protects against finger contact and solid foreign objects, but not against water or dust – therefore, application is limited to enclosed enclosures.
Functions and Equipment in DetailA central feature of the device adapter is the
mounted, tool-free adjustable support rail, which enables
snap-in mounting of devices. The support rail is designed for a height of 10 mm and can be adjusted to busbars with thicknesses of 5 mm or 10 mm and widths of 15 mm, 20 mm, or 30 mm. The simple plug-in locking mechanism of the support rail allows for quick and secure installation without tools. Optionally, a
device anti-shift device can be used to fix the device during operation. The
dimensions of the adapter are 54 mm (width), 239.4 mm (height), and 36.2 mm (depth), making it suitable for standard switchboards.
Technology Explained SimplyThe adapter is made of
polyamide (PA 6), a robust plastic with good mechanical strength and heat resistance. The material meets the requirements for flammability behavior according to UL 94, ensuring safe use in electrical installations. The
rated voltage of 690 V AC and 600 V DC (UL) covers most industrial applications. The
pollution degree 3 according to IEC 60 664-1 indicates that the adapter is suitable for environments with increased pollution, such as production halls. The
operating temperature range is between -5 °C and 55 °C, with storage up to 75 °C being possible. The maximum operating air humidity is 90 %, with no condensation allowed.
Compatibility and AccessoriesThe adapter is specifically developed for the
RiLineX and
RiLine60 busbar systems, which feature a center-to-center spacing of 60 mm. It is compatible with various
accessory parts, including
connecting pins,
enclosure protection profiles,
mounting clips,
locking wedges,
support rails with height adjustment, and
anti-shift devices. These components enable flexible and secure mounting of various devices and reduce product variety through coordinated accessories. The support rail can also be secured with
locking screws or
locking pins to prevent unintended movement.
Mounting and InstallationInstallation is performed by simply snapping the support rail onto the busbar, with the tool-free adjustment allowing adaptation to different bar thicknesses (5/10 mm). The pre-fabricated connection leads simplify wiring, as no additional cables need to be laid. The snap-in mounting of devices onto the support rail is quick and secure, reducing installation time. Adhering to the specified mounting instructions ensures a safe and durable connection.
Advantages in OperationThe Rittal RX 9360760 offers
reduced product variety through standardized accessories, simplifying planning and ordering. The
tool-free mounting and
fast wiring via pre-fabricated leads reduce installation time. The
high electrical strength and
certification according to IEC 61 439-1/-2 and UL 508 ensure safety in industrial installations. The
adjustability of the support rail allows flexible adaptation to different busbar profiles, expanding application possibilities. The
robust construction from PA 6 and
good heat resistance ensure long service life under industrial conditions.