| General |
| Model | with connection cable |
| Material | Polyamide (PA 6), flammability according to UL 94 |
| Colour | RAL 9005, RAL 35745 |
| Connection wires (AWG) | AWG 8 |
| Rated current (max.) | 50 A |
| Rated current for round conductor | 50 A |
| Rated current for round conductor (UL) | 50 A |
| Electrical values UL (SCCR) | 600 V / 7.5 kA SCCR unprotected AC UL, 100 kA - 600 V, Fuse Class RK5 max. 60 A, JDDZ/7, 22 kA - 600 V, Combination Motor Controller max. 40 A, NKJH/7, 20 kA - 600 V, Circuit Breaker max. 60 A, DIVQ/7, 65 kA - 480 V, Combination Motor Controller max. 52 A, NKJH/7 |
| Cable exit | Below |
| For rail systems with centre spacing | 60 mm |
| Connection cable length | 130 mm |
| Number of poles | 3-pole |
| Suitable for busbar system | RiLineX, RiLine60 |
| Width | 54 mm |
| Height | 239,4 mm |
| Depth | 36,2 mm |
| DIN rail quantity/height | 1 / 10 mm |
| Suitable for busbars | 15 x 5/10 mm, 20 x 5/10 mm, 30 x 5/10 mm |
| Rated voltage | 690 V AC, 600 V AC (UL), 600 V DC (UL) |
| Pollution degree | 3 |
| Standards | IEC 61 439-1/-2, UL 508 |
| Rated impulse voltage Uimp | 8 kV |
| Rated insulation voltage Ui | 1.000 V |
| Degree of protection IP according to IEC 60 529 | IP 2XB |
| Operating air humidity max. | 90 % |
| Operating temperature range | -5 °C...55 °C |
| Storage temperature range | -25 °C...75 °C |
| Humidity (non-condensing) | 10...90 % |
| Fire load | 3,763 MJ/m² |
| Copper content (kg/piece) | 0,101 |
| PCF/VE (Cradle-to-Gate) | 12,18 |
The Rittal RX 9360740 is a
device adapter for 60 mm busbar systems, specifically designed for mounting control devices such as motor starters or switching devices on DIN rails. The device features a
3-pole configuration with pre-fabricated connection leads and is rated for a maximum nominal current load of 50 A. The connection leads have a cross-section size of AWG 8 (approximately 10 mm²) and exit the device at the bottom. The width is 54 mm, the height 239.4 mm, and the depth 36.2 mm. The support rail is tool-free adjustable and enables
snap-in mounting of devices, thereby reducing mounting time. The rail is suitable for busbars with a thickness of 5 mm or 10 mm and a width of 15 mm, 20 mm, or 30 mm. The fit is designed for busbar systems with a center-to-center spacing of 60 mm, particularly for the systems
RiLineX and
RiLine60.
Applications
The adapter is used in industrial electrical installations where switching and protective devices are mounted on busbars. It is particularly suitable for installations with high electrical loads, as it supports a rated voltage of 690 V AC and 600 V DC (UL). The protection class IP 2XB according to IEC 60 529 protects against finger contact and solid foreign objects, but not against splashing water or dust. The operating temperature ranges from -5 °C to 55 °C, and the storage temperature ranges from -25 °C to 75 °C. The maximum operating air humidity is 90 %, with no condensation allowed.
Functions and Equipment in Detail
The device is made of
polyamide (PA 6), which exhibits specific flammability characteristics according to UL 94. The color is RAL 9005 (black) and RAL 35745 (gray). The pre-mounted support rail enables easy snap-in locking and is designed for a height of 10 mm. The connection leads have a length of 130 mm. The electrical values according to UL include various SCCR values (Short-Circuit Current Rating) depending on the switching device type, such as 100 kA at 600 V for fuses of class RK5 up to 60 A. The rated insulation voltage is 1,000 V, and the rated impulse voltage is 8 kV. The pollution degree is classified as 3, indicating high susceptibility to contamination in industrial environments.
Technology Explained Simply
The
snap-in mounting allows devices to be mounted onto the support rail without tools, accelerating installation. The tool-free adjustment of the support rail adapts to various rail thicknesses, increasing flexibility. The pre-fabricated connection leads reduce mounting time, as no additional cables need to be laid. The choice of polyamide material ensures high mechanical stability and heat resistance. The standards IEC 61 439-1/-2 and UL 508 guarantee compliance with international safety and quality standards.
Compatibility and Accessories
The adapter is compatible with the busbar systems RiLineX and RiLine60. Various accessories are available, such as connecting pins, encircling protection profiles, mounting clips, locking wedges, support rails with height adjustment, anti-shift devices, and expansion blocks. These enable adaptable mounting and protection against accidental displacement of devices. The accessories are specifically designed for a width of 54 mm and thus fit directly to the adapter.
Mounting and Installation
Mounting is done by snapping the support rail into the busbar. Devices are then placed onto the support rail and locked in place. The connection leads are connected to the corresponding terminals. The tool-free adjustment of the support rail is done by simple sliding, without requiring screwdrivers or other tools. Installation is therefore quick and possible without special tools.
Operational Advantages
The adapter reduces part variety through coordinated accessories and enables standardized mounting. The pre-fabricated connection leads and snap-in mounting shorten installation time. The high electrical load capacity and compliance with international standards ensure safe and reliable operation in industrial installations. The materials and construction are designed for use in industrial environments, with operating temperature and humidity within the specified limits.