| General |
| Model | with connection cable |
| Material | Polyamide (PA 6), flammability according to UL 94 |
| Colour | RAL 9005, RAL 35745 |
| Connection wires (AWG) | AWG 10 |
| Rated current (max.) | 40 A |
| Rated current for round conductor | 40 A |
| Rated current for round conductor (UL) | 40 A |
| Cable exit | Below |
| For rail systems with centre spacing | 60 mm |
| Connection cable length | 160 mm |
| Number of poles | 3-pole |
| Suitable for busbar system | RiLineX, RiLine60 |
| Width | 45 mm |
| Height | 239,4 mm |
| Depth | 36,2 mm |
| DIN rail quantity/height | 1 / 10 mm |
| Suitable for busbars | 15 x 5/10 mm, 20 x 5/10 mm, 30 x 5/10 mm |
| Rated voltage | 690 V AC, 600 V AC (UL), 600 V DC (UL) |
| Pollution degree | 3 |
| Standards | IEC 61 439-1/-2, UL 508 |
| Rated impulse voltage Uimp | 8 kV |
| Rated insulation voltage Ui | 1.000 V |
| Degree of protection IP according to IEC 60 529 | IP 2XB |
| Operating air humidity max. | 90 % |
| Operating temperature range | -5 °C...55 °C |
| Storage temperature range | -25 °C...75 °C |
| Humidity (non-condensing) | 10...90 % |
| Fire load | 3,419 MJ/m² |
| Copper content (kg/piece) | 0,088 |
| PCF/VE (Cradle-to-Gate) | 9,34 |
Rittal device adapter type RX 9360730 is a
3-pole mounting component for enclosures, specifically designed for the installation of operating devices such as motor starters on
60 mm busbar systems such as RiLineX or RiLine60. The device features a
pre-fabricated connection cable with a length of 160 mm, exiting at the bottom, enabling direct and secure connection to the busbars. The
support rail is tool-free adjustable and allows for
push-on mounting of devices, thereby reducing mounting time and increasing mounting accuracy. The adapter has a width of 45 mm, a height of 239.4 mm, and a depth of 36.2 mm, allowing it to integrate well into standardized enclosure configurations.
Applications
The device adapter is primarily used in industrial electrical engineering, where secure and rapid mounting of switching and protection devices on busbars is required. It is suitable for applications in manufacturing automation, power distribution, and process control, where high reliability and ease of maintenance are required. Use in enclosures with 60 mm center spacing is standardized, ensuring compatibility with existing systems.
Functions and Equipment in Detail
The adapter is equipped with a
support rail that can be adjusted without tools to compensate for different busbar thicknesses (5 mm or 10 mm) and widths (15 mm, 20 mm, 30 mm). The
connection cables have an AWG 10 cross-section rating, equivalent to a cable cross-section of 6 mm², and are rated for a
rated current of 40 A. The
rated voltage is 690 V AC, supplemented by UL approvals for 600 V AC and 600 V DC, enabling use in international installations. The
protection rating IP 2XB according to IEC 60 529 protects against finger contact and solid foreign objects, but not against splashing water or dust, making it suitable for indoor installations only.
Technology Explained Simply
The
rated insulation voltage Ui of 1,000 V and the
rated impulse voltage Uimp of 8 kV ensure sufficient electrical insulation to prevent overvoltages and short circuits. The
pollution degree 3 indicates that the adapter is suitable for environments with increased contamination, such as industrial production halls, where dirt and moisture could affect insulation. The material
polyamide (PA 6) offers high mechanical stability and is flame-retardant according to UL 94, increasing fire safety. The
operating temperature range of -5 °C to 55 °C and the
storage temperature range of -25 °C to 75 °C allow flexible use under various climatic conditions.
Compatibility and Accessories
The adapter is specifically designed for
RiLineX and
RiLine60 busbar systems. It can be combined with various accessories, such as the
anti-shift device for support rail W: 45 mm, the
enclosure profile, or
mounting clips, to secure the mounting and protect devices against unintended shifting. Additionally,
support rails with locking clip or
height adjustment are available to optimize mounting on different busbar profiles.
Expansion blocks for device adapters allow flexible expansion of mounting capacity.
Mounting and Installation
Mounting is done by simply pushing the support rail onto the busbar, with the tool-free adjustment enabling adaptation to different rail thicknesses. The pre-fabricated connection cables reduce mounting time and minimize error sources. The locking mechanism of the support rail ensures secure fixation of the device. Installation requires no additional tools, accelerating the mounting process in industrial environments.
Advantages in Operation
The device adapter reduces part variety through coordinated accessories and enables standardized mounting. The tool-free adjustment and pre-fabricated cables increase mounting efficiency. The high mechanical stability of the polyamide material and its flame-retardant properties according to UL 94 enhance operational safety. Approvals according to
IEC 61 439-1/-2 and
UL 508 guarantee compliance with international safety standards, enabling use in various markets. The
operating humidity up to 90 % (non-condensing) allows use in humid environments, provided no condensation occurs.