| General |
| Model | Universal |
| Material | Polyamide (PA 6), flammability according to UL 94 |
| Colour | RAL 9005, RAL 35745 |
| Scope of delivery | Including 3 connection chamber covers, 2 traverses and mounting material |
| Degree of protection IP according to IEC 60 529 | IP 2XB |
| Rated impulse voltage Uimp | 8 kV |
| Rated voltage | 690 V AC, 600 V AC (UL) |
| Rated insulation voltage Ui | at rail thickness 5 mm: 800 V, at rail thickness 10 mm: 1,000 V |
| Pollution degree | 3 |
| Number of poles | 3-pole |
| Cable exit | Above/under |
| Electrical connection type | M10 screw |
| Cross section | 29 mm², 10 mm² |
| Suitable for manufacturer (type) | Easily find the appropriate device adapter using our selection guide in the Downloads section. |
| Suitable for busbar system | RiLineX, RiLine60 |
| Maximum power dissipation | 24 W |
| Frequency of fundamental wave | 50...60 Hz |
| Humidity (non-condensing) | 10...90 % |
| Suitable for busbars | 15 x 5/10 mm, 20 x 5/10 mm, 30 x 5/10 mm |
| Operating temperature range | -25 °C...55 °C |
| Storage temperature range | -25 °C...75 °C |
| Width | 145 mm |
| Height | 325,8 mm |
| Depth | 76,4 mm |
| Fire load | 16,043 MJ/m² |
| Copper content (kg/piece) | 2,64 |
| PCF/VE (Cradle-to-Gate) | 28,1 |
The Rittal RX 9360635 is a
CB device adapter for 60 mm busbar systems, specifically designed for the direct mounting of compact power circuit breakers (MCCB) onto the board. The
universal version with sliding nuts enables flexible mounting of various switch types and provides a tool-free snap-in mounting. The adapter is designed for a maximum rated current of 630 A and supports a
busbar thickness of 5 mm and 10 mm. The
semi-automatic adjustment of busbar thickness is achieved via adjustable support rails, enabling quick and easy pre-assembly of market-standard switches outside the enclosure.
Applications include the mounting of power circuit breakers in industrial enclosures, particularly in systems with RiLineX or RiLine60. The
protection rating IP 2XB according to IEC 60 529 provides protection against finger contact and against solid foreign objects, but not against water or dust. The
rated voltage is 690 V AC (600 V AC according to UL), and the
rated insulation voltage Ui is 800 V for 5 mm and 1,000 V for 10 mm busbar thickness. The
pollution degree 3 is suitable for environments with heavy contamination, such as those found in industrial plants.
Functions and equipment in detail include a
tool-free snap-in mounting up to 250 A, which reduces mounting time. The
connection type is via a screw M10, supporting a cross-section of 29 mm² (for 5 mm busbar thickness) and 10 mm² (for 10 mm busbar thickness). The
cable exit can be set either top or bottom, enabling flexible integration into existing control systems. The
rated impulse voltage Uimp is 8 kV, ensuring reliability during transient voltage surges.
Technology explained simply shows that the adapter is made of
polyamide (PA 6), which according to UL 94 exhibits a specific flammability behavior. The color variants are RAL 9005 (black) and RAL 35745 (gray). The
power loss is limited to a maximum of 24 W, minimizing heat generation during operation. The
frequency of the fundamental wave is between 50 and 60 Hz, sufficient for most industrial applications. The
operating temperature range is from -25 °C to 55 °C, and the
storage temperature range is from -25 °C to 75 °C, ensuring broad usability under various climatic conditions.
Compatibility and accessories include use with the busbar systems
RiLineX and
RiLine60. Compatible busbar profiles are available in dimensions 15 x 5/10 mm, 20 x 5/10 mm, and 30 x 5/10 mm. As accessories, the
enclosure protection profile RX 9365025 (length 1200 mm) and the
mounting clip RX 9365027 are offered, serving for secure mounting and protection of connections.
Mounting and installation is performed via tool-free snap-in mounting, where the sliding nuts enable adaptation to various switch types. The
air humidity during operation must not be condensing and ranges between 10 % and 90 %.
Operational advantages lie in fast and secure mounting, flexibility in adapting to different switches, and reduced mounting time through pre-assembly outside the enclosure. The
copper content is 2.64 kg per unit, and the
fire load is 16.043 MJ/m², relevant for fire protection planning. The
PCF/VE (Cradle-to-Gate) is 28.1, describing the environmental impact of the product.
The adapter is designed for use in industrial environments where reliability, flexibility, and fast mounting are critical. The combination of universal design, tool-free mounting, and compatible integration into RiLineX and RiLine60 systems makes it a practical solution for enclosure technology.