| General |
| Material | Polyamide (PA 6), flammability according to UL 94 |
| Colour | RAL 9005 |
| Rated current (reference value, IEC) | 171 A |
| Rated current round conductor max. (IEC) | 320 A |
| Rated current for round conductor max. (UL) | 280 A |
| Electrical values UL (SCCR) | 10 kA - 600 V, RMS, unprotected, 100 kA - 600 V, Circuit Breaker max. 250 A, DIVQ/7, 100 kA - 600 V, Fuse Class J max. 200 A, JDDZ/7 |
| Cable exit | Above/under |
| For rail systems with centre spacing | 60 mm |
| Number of poles | 3-pole |
| Suitable for busbar system | RiLineX, RiLine60 |
| Width | 63,2 mm |
| Height | 239,4 mm |
| Depth | 79,2 mm |
| Connection of ring conductors | 2,5 ‐ 70 mm² |
| Suitable for busbars | 12 x 5/10 mm, 15 x 5/10 mm, 20 x 5/10 mm, 30 x 5/10 mm |
| Rated voltage | 800 V AC, 800 V DC, 600 V AC (UL), 600 V DC (UL) |
| Pollution degree | 3 |
| Standards | IEC/EN 61439-1, UL 508 |
| Rated impulse voltage Uimp | 8 kV |
| Rated insulation voltage Ui | 800 V |
| Maximum power dissipation | 14 W |
| Degree of protection IP according to IEC 60 529 | IP 2X |
| Operating air humidity max. | 90 % |
| Operating temperature range | -5 °C...55 °C |
| Storage temperature range | -25 °C...75 °C |
| Humidity (non-condensing) | 10...90 % |
| Fire load | 6,963 MJ/m² |
| PCF/VE (Cradle-to-Gate) | 9,86 |
The Rittal RX 9360210 is a
connection adapter for 60 mm busbar systems, specifically designed for the
RiLineX and
RiLine60 systems. It enables secure and efficient mounting on the busbar system as well as cable connection with only one screw. Installation is carried out by simply snapping onto the RiLineX board, where the connection conductor and adapter are screwed together onto the rail. This ensures a stable and reliable connection suitable for industrial applications.
Applications
The adapter is intended for use in industrial electrical installations, particularly in enclosures and power distribution systems, where a secure and compact connection between busbar and round conductors is required. It is suitable for installations with a rated voltage up to 800 V AC/DC (IEC) or 600 V AC/DC (UL) and is used in environments with an operating temperature range of -5 °C to 55 °C. The maximum operating air humidity is 90 %, with no condensation allowed.
Functions and Equipment in Detail
The connection adapter features a
screw fastening suitable for rail thicknesses between 5 and 10 mm. The connection terminals allow for
through-wiring, enabling conductors to be connected from above or below. The terminals are designed for round conductors with a cross-section of 2.5 to 70 mm². The
pole count is 3-pole, making it suitable for three-phase installations. The
rated current for round conductors is up to 320 A (IEC) or 280 A (UL), with a nominal current reference value of 171 A. The
power loss is limited to a maximum of 14 W, ensuring efficient heat dissipation.
Technology Explained Simply
The adapter is made of
polyamide (PA 6), a robust plastic with good mechanical strength and heat resistance. The material complies with UL 94 flammability standards, ensuring safe use in electrical installations. The
protection class IP 2X according to IEC 60529 protects against finger contact and against entry of solid foreign objects larger than 12.5 mm, but not against water. The
rated insulation voltage Ui is 800 V, and the
rated impulse voltage Uimp is 8 kV, ensuring electrical strength under transient voltage stresses. The
pollution degree 3 indicates suitability for environments with heavy contamination, such as industrial facilities.
Compatibility and Accessories
The adapter is specifically developed for busbar systems with a center-to-center spacing of 60 mm and fits rails with dimensions 12 x 5/10 mm, 15 x 5/10 mm, 20 x 5/10 mm, and 30 x 5/10 mm. As accessories, the
enclosure protection profile RX 9365025 (length 1200 mm) and the
mounting clip RX 9365027 are available, which can be used to enhance shock protection and secure mounting.
Installation and Mounting
Installation is tool-dependent, carried out by screwing onto the RiLineX board. Removal is also only possible with tools, preventing unintended disconnection. Connection conductors are directly fastened to the terminals, with through-wiring enabling flexible cabling. The terminals are designed to ensure a secure and durable connection even under high current loads.
Operational Advantages
The connection adapter features
high current-carrying capacity and
short-circuit resistance. The universal shock protection function adapts to the conductor cross-section used, ensuring safe and standard-compliant installation. The compact design and simple mounting reduce installation time and increase system reliability. Compliance with standards
IEC/EN 61439-1 and
UL 508 ensures conformity with international safety standards.
Additional Technical Specifications
The adapter is designed for an operating temperature range of -5 °C to 55 °C, with a storage temperature up to 75 °C. Operating air humidity must not exceed 90 %, with no condensation allowed. The
fire load is 6.963 MJ/m², and the
PCF/VE (Cradle-to-Gate) is specified as 9.86. The packaging unit contains 4 pieces.
Standards and Approvals
The connection adapter complies with standards
IEC/EN 61439-1 and
UL 508. It is UL-approved (UL + C-UL listed), enabling its use in the USA and Canada. The electrical values according to UL (SCCR) include 10 kA at 600 V (unprotected), 100 kA at 600 V with circuit breaker (max. 250 A, DIVQ/7), and 100 kA at 600 V with fuse (Class J, max. 200 A, JDDZ/7).