Further information for Rittal 9209100 KE 9209100 Ex enclosure 800x1000x300 mm
General
Model
Ex enclosure
Applications
Zone 1 and 2 or 21 and 22 according to 2014/34/EU, ambient temperature range: -40 °C...+70 °C, the specified temperatures may be limited by installed devices, protection type according to EN 60 079: device protection by increased safety (Ex e), device protection by enclosure (Ex tb)
Type 1, Type 3R, Type 3RX, Type 4, Type 4X, Type 12
IK code
IK09
Operating temperature range
-40 °C...70 °C
Operation temperature
The specified temperatures may be limited by the installed devices
Certificate IEC EX PTB 10.0011U
Certificate PTB 03 ATEX 1011U
The Rittal KE 9209100 is an Ex enclosure made of glass-fibre-reinforced, unsaturated polyester, designed for use in explosive atmospheres in accordance with Directive 2014/34/EU. It is approved for Zone 1 and 2 as well as Zone 21 and 22 and provides protection through increased safety (Ex e) and through the enclosure (Ex tb) in accordance with EN 60 079. The enclosure has dimensions of 800 mm (width) × 1,000 mm (height) × 300 mm (depth) and is available in the colour RAL 9011. It features a hinged door with a continuous silicone seal and a door opening angle of 130°. The door is equipped with a stainless steel hinge that can be reversed from left to right. The mounting plate made of galvanised steel sheet has dimensions of 705 mm × 925 mm and a material thickness of 3 mm. The scope of delivery includes the enclosure, the door, and the mounting plate.
Applications
This enclosure is designed for use in explosive atmospheres, particularly in Zone 1 and 2 (gaseous explosive atmospheres) and Zone 21 and 22 (dust explosive atmospheres) in accordance with EU Directive 2014/34/EU. The ambient temperature can range from -40 °C to +70 °C, although the actual operating temperature may be limited by installed components. The approvals include certificates IEC EX PTB 10.0011U and PTB 03 ATEX 1011U.
Functions and Equipment in Detail
The enclosure consists of a single-piece, impact-resistant plastic body made of glass-fibre-reinforced, unsaturated polyester, which is self-extinguishing according to UL 94 V-0. The surface resistances of the enclosure and door are below 10⁹ Ω, ensuring sufficient electrical insulation. The doors are fitted with a continuous silicone seal to ensure a tight seal. Double seals are integrated at the top and bottom edges of the door as rain protection strips. The mounting plate features keyhole slots for earthing and a printed QR code that links to product information and documentation.
Technical Explanation
The protection type Ex e (increased safety) ensures that no sparks or hot surfaces are generated that could ignite an explosive atmosphere. The protection type Ex tb (enclosure protection) ensures that the enclosure seals internal components from the environment, preventing any explosion inside from escaping outward. The protection rating IP 65 according to IEC 60 529 means dust-tight and protected against water jets, making it suitable for outdoor use. The NEMA protection ratings include Type 1, 3R, 3RX, 4, 4X, and 12, covering a wide range of environmental conditions. The IK code IK09 indicates high mechanical impact resistance.
Compatibility and Accessories
Various accessories are available for use with the enclosure, including wall mounting brackets for AX plastic in RAL 9011, door latches, universal angles, and plastic screws for internal installation. These components enable flexible mounting and adaptation to specific requirements.
Mounting and Installation
The enclosure is supplied as an empty housing with a hinged door and can be installed directly. The mounting plate provides numerous mounting holes for internal installation. The door can be mounted on either side (left or right), allowing for flexible installation. The integrated door stops at the top and bottom edges of the door facilitate mounting and secure closure.
Operational Advantages
The enclosure offers high mechanical strength and weather resistance. The materials are temperature-resistant between -40 °C and +70 °C and self-extinguishing. The integrated earthing via the keyhole slots on the mounting plate, as well as the QR codes for traceability and document access, enhance safety and maintainability. The protection ratings IP 65 and IK09 ensure reliable operation in demanding environments.