Rittal 9205100, EAN: 4028177952096

Rittal 9205100 KE 9205100 Ex enclosure 400x600x200 mm

Industrial Material > Enclosures / Chassis > Enclosures

Rittal 9205100 KE 9205100 Ex enclosure 400x600x200 mm

Lieske Part No. 1989432
Mfg Part No 9205100
EAN-Code 4028177952096
Manufacturer Rittal
Here only 316,94 EUR
377,16 EUR incl. VAT

Further information for Rittal 9205100 KE 9205100 Ex enclosure 400x600x200 mm

General
ModelEx enclosure
ApplicationsZone 1 and 2 or 21 and 22 according to 2014/34/EU, ambient temperature range: -40 °C...+70 °C, the specified temperatures may be limited by installed devices, protection type according to EN 60 079: device protection by increased safety (Ex e), device protection by enclosure (Ex tb)
MaterialHousing: glass-fibre-reinforced unsaturated polyester, surface resistance: < 10⁹ Ω, door: glass-fibre-reinforced unsaturated polyester, surface resistance: < 10⁹ Ω, continuously bonded silicone seal, mounting plate: sheet steel, zinc-coated
ColourRAL 9011
Scope of deliveryhousing, door, mounting plate
Width400 mm
Height600 mm
Depth200 mm
Mounting plate dimensions (W x H)305 mm x 525 mm
Mounting plate material thickness3 mm
LockNumber of locks: 2
Degree of protection IP according to IEC 60 529IP 65
NEMA degree of protectionType 1, Type 3R, Type 3RX, Type 4, Type 4X, Type 12
IK codeIK09
Operating temperature range-40 °C...70 °C
Operation temperatureThe specified temperatures may be limited by the installed devices
Certificate IEC EX PTB 10.0011UJa
Certificate PTB 03 ATEX 1011UJa
The Rittal KE 9205100 is an Ex enclosure made of glass-fibre-reinforced, unsaturated polyester, designed for use in explosive atmospheres. It is approved for Zone 1 and 2 as well as Zone 21 and 22 according to Directive 2014/34/EU and provides protection through increased safety (Ex e) and through the enclosure (Ex tb) in accordance with EN 60 079. The enclosure is designed as a blank enclosure with hinged door and is suitable for use in industrial plants where high safety standards are required to avoid ignition sources. Dimensions are 400 mm width, 600 mm height, and 200 mm depth, with the specified operating temperatures of -40 °C to +70 °C potentially limited by installed devices.

Applications
This enclosure is intended for use in explosive environments, particularly in areas classified as Zone 1, 2, 21 or 22. It is suitable for applications in the chemical industry, petrochemicals, power generation, and other sectors where flammable gases, vapours or dusts may be present. Approvals according to ATEX (PTB 03 ATEX 1011U) and IECEx (IEC EX PTB 10.0011U) ensure compliance with European and international safety standards.

Functions and Equipment in Detail
The enclosure consists of a one-piece, impact-resistant body made of glass-fibre-reinforced, unsaturated polyester, which is self-extinguishing according to UL 94 V-0. The door is fitted with a continuous silicone seal, ensuring a tight seal. The door features a 130° stainless steel hinge, allowing an opening angle of 130°. The door pivot can be changed from left to right. Integrated guide rails are located at the top and bottom of the door, ensuring secure guidance during opening and closing. The mounting plate made of galvanised steel sheet (3 mm thickness) is equipped with grounding hole and allows secure fixation inside the enclosure.

Technology Explained Simply
The protection rating IP 65 according to IEC 60 529 means the enclosure is dust-tight and protected against splashing water, making it suitable for outdoor use or in damp environments. The protection ratings NEMA Type 1, 3R, 3RX, 4, 4X and 12 cover various environmental conditions, from dry indoor spaces to weather-resistant outdoor installations. The IK code IK09 indicates high mechanical impact resistance, protecting the enclosure against mechanical damage. The surface resistance of less than 10⁹ Ω ensures static charges are dissipated, which is critical in explosive environments.

Compatibility and Accessories
Various accessories are available for this enclosure to facilitate mounting and use. These include wall mounting brackets for AX plastic in RAL 9011, a door latch, universal brackets, and plastic screws for internal installation. These components enable flexible and secure installation of the enclosure at various locations and support internal installation with additional mounting options.

Mounting and Installation
The enclosure is supplied with a mounting plate that enables secure fixation of devices inside. The mounting plate measures 305 mm x 525 mm and has a material thickness of 3 mm. Integrated mounting bosses in the enclosure body and on the door facilitate internal installation. The door can be secured with two latches, ensuring a secure and tight closure. Installation is typically done on a wall or support structure, with wall mounting brackets serving as an optional addition.

Operational Advantages
The enclosure offers high mechanical and chemical resistance, is temperature resistant between -40 °C and +70 °C, and protects installed devices from environmental influences. The integrated grounding option on the mounting plate ensures a safe electrical connection. QR codes on the enclosure, door, and mounting plate enable unique identification and easy access to relevant product information, as well as traceability of individual components. The combination of robust material, high protection rating, and approvals for explosive environments makes this enclosure a reliable solution for demanding industrial applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1989432
qrcode für Rittal 9205100 KE 9205100 Ex enclosure 400x600x200 mm