Rittal 8951010, EAN: 4028177920941

Rittal 8951010 VX 8951.010 disconnect switch cover 2000x600 mm

Industrial Material > Enclosures / Chassis > Switchboard-Systems

Rittal 8951010 VX 8951.010 disconnect switch cover 2000x600 mm

Lieske Part No. 1440190
Mfg Part No 8951010
EAN-Code 4028177920941
Manufacturer Rittal
Here only 388,47 EUR
462,28 EUR incl. VAT

Further information for Rittal 8951010 VX 8951.010 disconnect switch cover 2000x600 mm

General
MaterialSheet steel, 1.5 mm
Surface protectionPowder-coated
ColourRAL 7035
Scope of deliveryIncluding main door lock, cover plate and mounting material.
Width103 mm
Height2.000 mm
Depth600 mm
NoteMounting of hood only on single-door cabinet with door frame
Type rating according to UL 50EType 1, Type 12
Degree of protection IP according to EN 60 529IP 55 in conjunction with VX series cabinets
NEMA degree of protectionNEMA 12 (in combination with VX series cabinets)
Rittal VX 8951.010 is a disconnector hood for enclosures of the VX series, designed to convert single-door bayed enclosures into disconnector enclosures. The product is made of steel sheet with a thickness of 1.5 mm and is powder-coated in the colour RAL 7035. Dimensions are 103 mm width, 2,000 mm height, and 600 mm depth. The hood is supplied with a main door locking mechanism, a cover plate, and the required mounting material. Installation is exclusively on a single-door enclosure with a door tube frame, and the hood can be mounted either on the left or right side of the enclosure. This ensures the full mounting area of the enclosure remains available.

Applications
The disconnector hood is intended for use in industrial electrical installations, particularly in combination with main switches from various manufacturers. It has been tested in conjunction with operating levers for switches from Allen Bradley, Square D, General Electric, Eaton, and Siemens. The hood meets the requirements of UL 508 A and is therefore suitable for use in installations complying with UL standards. In combination with auxiliary door locking, operating mechanisms, and push rods, even bayed combinations can meet the requirements.

Functions and Equipment in Detail
The hood features two cutouts on the front side, designed for the installation of operating levers at different heights. This allows for flexible adaptation to various switch types. The integrated main door locking mechanism ensures secure locking of the enclosure in accordance with UL standards. In combination with an integrable mounting plate intermediate piece, the mounting area of the main enclosure can be increased by up to 14 %, facilitating the installation of additional components.

Technology Explained Simply
The disconnector hood is made of robust steel sheet, providing high mechanical stability. The powder coating in RAL 7035 ensures an even surface and corrosion protection. The protection rating IP 55, in combination with VX enclosures, means the hood is dust-tight and protected against water jets, making it suitable for use in industrial environments. The NEMA protection rating 12 (in combination with VX enclosures) corresponds to requirements for indoor use with light contamination and protection against splashing water.

Compatibility and Accessories
The hood is compatible with enclosures of the VX series and can be combined with various accessories. Suitable accessories include door locking mechanisms for bayed combinations, mounting plate intermediate pieces for VX and TS enclosures, and screwable side panels with a height of 2,000 mm and depth of 600 mm. These components allow for flexible adaptation to different requirements in enclosure construction.

Mounting and Installation
The hood is mounted on a single-door enclosure with a door tube frame. It can be installed either on the left or right side of the enclosure. Mounting is done using the included material. The integrated main door locking mechanism is connected to the enclosure during installation to ensure safety locking. The front side of the hood features two cutouts for operating levers, which can be positioned according to the switch height.

Operational Advantages
The disconnector hood enables the safe and standard-compliant conversion of single-door enclosures into disconnector enclosures. The expansion of the mounting area by up to 14 % through the mounting plate intermediate piece provides additional space for components. Compatibility with various switch manufacturers and compliance with UL 508 A standards increase flexibility and safety in operation. The robust construction and IP 55 protection rating ensure reliable performance in industrial environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1440190
qrcode für Rittal 8951010 VX 8951.010 disconnect switch cover 2000x600 mm