Rittal 8660061, EAN: 4028177037939

Rittal 8660061 VX base corner piece with cover 200x800 mm

Industrial Material > Enclosures / Chassis > System Accessories

Rittal 8660061 VX base corner piece with cover 200x800 mm

Lieske Part No. 877356
Mfg Part No 8660061
EAN-Code 4028177037939
Manufacturer Rittal
Here only 252,51 EUR
300,49 EUR incl. VAT

Further information for Rittal 8660061 VX base corner piece with cover 200x800 mm

General
MaterialSocket corner piece: stainless steel 1.4301 (AISI 304), socket faceplate front/back: stainless steel 1.4301 (AISI 304), cover caps: ABS
Surface protectionLinear grind, grit 400
Scope of deliveryincluding mounting material, 4 socket corner pieces, 4 end caps, 1 socket front/rear cover, 200 mm, 2 socket front/rear covers, 100 mm
NoteSocket inserts, required on the sides to complete a socket unit and provide additional stabilization between sockets. The included cover caps can be replaced, if required, with stainless steel cover caps for VX socket system, stainless steel. Components of the 1st generation of the socket system cannot be combined with components of the 2nd generation of the socket system.
Height200 mm
Suitable forCabinet type: VX, VX SE, TS, PC, width: = 800 mm
Type rating according to UL 50EType 1, Type 3R, Type 4, Type 4X, Type 12
The Rittal VX 8660061 is a plinth corner piece with integrated plinth trim panels at the front and rear, specifically designed for the VX plinth system. It serves as a stable base for enclosures and housings of types VX, VX SE, TS and PC with a width of 800 mm. The component is made of stainless steel 1.4301 (AISI 304), ensuring high corrosion resistance and mechanical strength. The surface features a brushed finish with grit 400, creating an even, decorative appearance while also facilitating cleaning. The height is 200 mm, ensuring sufficient stability and secure standing of the enclosure.

Applications

The plinth corner piece is used in industrial environments where enclosures must be mounted on a stable foundation. It is particularly suitable for installations in production environments where high mechanical loads, moisture or aggressive environmental conditions occur. Use in combination with other plinth components enables modular and flexible mounting of enclosures of various sizes and configurations. Compatibility with housing types such as VX, VX SE, TS and PC makes it a universally applicable component.

Functions and Equipment in Detail

The product includes four plinth corner pieces, four ABS caps, one plinth trim panel front/rear with a height of 200 mm, and two plinth trim panels front/rear with a height of 100 mm. The plinth trim panels serve not only for aesthetic finishing but also contribute to additional stabilization between the plinths. The ABS caps are easy to install and protect the fastening elements from contamination. The included caps can be replaced with stainless steel caps if required, to enhance the external appearance and corrosion resistance.

Technology Explained Simply

The plinth corner pieces are equipped with large openings that allow direct access to the fastening points. This significantly simplifies mounting and maintenance, as no additional tools or removal of components are required. The seamless baying capability of the plinth corner pieces enables a continuous and aesthetically pleasing connection of multiple enclosures. The material choice of stainless steel 1.4301 ensures long service life even under demanding conditions. The surface treatment with brushed finish grit 400 provides an even, easy-to-clean surface.

Compatibility and Accessories

The plinth corner piece is designed for enclosures with a width of 800 mm and fits housing types VX, VX SE, TS and PC. It is part of the first-generation VX plinth system and cannot be combined with components of the second generation. Available accessories include mounting brackets, mounting plates, cable strain relief rails and levelling elements. These components support secure and flexible mounting of the enclosure and enable optimal integration into existing installations. Combination with VX plinth adapters or double swivel castors expands application possibilities, especially for mobile or height-adjustable enclosures.

Mounting and Installation

Mounting is done using the included fastening materials. The plinth corner pieces are attached to the corners of the enclosure, with the integrated front and rear trim panels improving the external appearance and providing additional stability. The caps are inserted over the fastening elements to achieve a clean and closed surface. Installation is simple and requires no special tools. The seamless baying capability enables a continuous connection of multiple enclosures, creating a uniform and stable base.

Operational Advantages

The plinth corner piece provides high mechanical stability and prevents shifting or tipping of the enclosure. The use of stainless steel 1.4301 ensures long service life even in moist or corrosive environments. The integrated trim panels enhance the aesthetic appearance and protect the fastening elements. The large accessibility of the fastening points simplifies mounting and maintenance. Compatibility with various housing types and accessory components increases flexibility and adaptability to different requirements. Compliance with UL 50E Type Ratings (Type 1, Type 3R, Type 4, Type 4X, Type 12) ensures suitability for various environments, including outdoor areas and damp rooms.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/877356
qrcode für Rittal 8660061 VX base corner piece with cover 200x800 mm