Rittal 8619510, EAN: 4028177919570

Rittal 8619510 VX 8619.510 swivel frame small for B: 600/800 mm

Industrial Material > Enclosures / Chassis > System Accessories

Rittal 8619510 VX 8619.510 swivel frame small for B: 600/800 mm

Lieske Part No. 1441173
Mfg Part No 8619510
EAN-Code 4028177919570
Manufacturer Rittal
Here only 78,89 EUR
93,88 EUR incl. VAT

Further information for Rittal 8619510 VX 8619.510 swivel frame small for B: 600/800 mm

General
Materialsteel sheet
Surface protectionZinc-plated
Scope of delivery2 hinges 130°, including strike plate with double-bolt lock insert, material for mounting on installation kit
NoteTo lock the opened swivel frame, the swivel frame locking mechanism is required. Depending on the installation situation, system chassis 23 x 64 mm are required. In VX SE on cabinet profile in combination with adapter rail VX. For further installation options, see "Technology in detail".
Note on part numberFor installation in AX, additional installation kit AX required
Suitable forHousing type: VX, VX SE, AX, width: = 600 mm, = 800 mm, height: ≥ 600 mm
Suitable for housing typeVX, VX SE
Height units6 HE
The Rittal VX 8619.510 is a swing frame, small, specifically designed for mounting 482.6 mm (48,3 cm ( 19 inch ))-installation components in enclosures of types VX, VX SE and AX. It enables flexible installation of devices inside the enclosure, with the frame being swivellable by 130° to facilitate access to the mounted components. The product is made of sheet steel and features a galvanized surface, providing good corrosion protection. The construction is designed for enclosures with a width of 600 mm or 800 mm and a height of at least 600 mm. The height of the frame corresponds to 6 HE (height units), matching the standard dimension for 48,3 cm ( 19 inch ) devices.

Applications

The swing frame is used in industrial enclosures where flexible and accessible mounting of installation devices is required. It is particularly suitable for applications where frequent maintenance or replacement operations on the mounted components are necessary. Use in VX, VX SE and AX enclosures enables standardized integration into existing systems. The width variants of 600 mm and 800 mm cover common enclosure sizes, while the minimum height of 600 mm ensures sufficient space for mounting and operation of the devices.

Functions and Equipment in Detail

The delivery includes two hinges with a 130° opening movement, a latch with double-bar lock insert, and the necessary mounting material for attachment to the mounting kit. The hinges enable a secure and stable swivelling motion of the frame. The latch with double-bar lock insert ensures secure locking of the frame in the closed position. The mounting material is intended for attachment to the mounting kit, with the exact mounting method depending on the respective enclosure configuration.

Technology Explained Simply

The swing frame is made of sheet steel, protected against corrosion by galvanization. This surface treatment is particularly suitable for industrial environments where moisture or aggressive media may be present. The 130° hinges allow sufficient opening angle to ensure access to the front and side of the mounted devices. The use of 6 HE corresponds to the standard for 48,3 cm ( 19 inch ) installation devices and enables mounting of standard IT or control components. Mounting is done on the enclosure profiles, with a VX adapter rail required for VX SE enclosures.

Compatibility and Accessories

The swing frame is compatible with enclosure types VX, VX SE and AX. For mounting in AX enclosures, the additional AX mounting kit is required. Depending on the expansion situation, system chassis with dimensions 23 x 64 mm may be needed to support the mounting. The combination with the mentioned accessories enables flexible and secure installation in various enclosure configurations.

Mounting and Installation

Mounting is done on the enclosure profiles, with the exact fastening method depending on the enclosure type. For VX SE enclosures, the VX adapter rail is used to attach the frame to the enclosure profile. Fastening is done using the included mounting material. Installation of the devices is done directly onto the swing frame, taking into account the standard dimensions of 482.6 mm (48,3 cm ( 19 inch )) and 6 HE. The frame is opened via the 130° hinges, with locking achieved by the latch with double-bar lock insert.

Advantages in Operation

The swing frame enables improved accessibility to the mounted devices, simplifying maintenance and component replacement. The stable construction made of galvanized sheet steel ensures long service life and high mechanical strength. The use of standard 48,3 cm ( 19 inch ) dimensions allows mounting of a wide range of devices, increasing flexibility in use. The integrated locking mechanism ensures secure positioning of the frame, both in closed and open positions.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1441173
qrcode für Rittal 8619510 VX 8619.510 swivel frame small for B: 600/800 mm