| General |
| Applications | For mounting on floor plates |
| Material | Rigid PVC, Flame retardant, self-extinguishing, temperature resistant up to +60 °C, Seal: PU foam, Cross-section: 30 x 25 mm |
| Scope of delivery | Clip-on profiles, including elastic clamp profiles |
| Note | Two pieces required per cable entry point. For cabinet width 1000 mm and above, the base group is divided into two width sections. Two cable entry points (left/right) can be used. |
| Suitable for | Cabinet type: VX: = 600 mm, Cabinet type: VX SE, Cabinet type: Console subunit CX, Cabinet type: Floor console CX |
The Rittal VX 8618.800 is a
profile for cable entry, specifically designed for central integration into enclosures with a width of 600 mm. It serves as a
snap-on profile for base plates and enables an orderly and damage-free routing of cables during the installation of the mounting plate in a forward position. The construction ensures
full-surface contact and provides
high sealing for cables introduced into the enclosure, thereby maintaining the integrity of the installation and the protective function of the housing.
Applications
The profile is intended for use in various housing types, including the enclosure series
VX (from 600 mm width),
VX SE, as well as
CX console sub-units and
CX stand consoles. It is mounted directly onto base plates, allowing cables to be routed directly to a cable strain relief rail without large bending radii. This is particularly advantageous when mounting mounting plates in a forward position, as it enables clean and mechanically gentle cable routing.
Functions and Equipment in Detail
The profile is made of
rigid PVC, which is
hard to ignite and
self-extinguishing. The material properties ensure
temperature resistance up to +60 °C, making it suitable for typical industrial operating conditions. The integrated
sealing made of PU foam ensures effective sealing and prevents ingress of dust or moisture. The cross-sectional dimension is
30 x 25 mm, providing sufficient routing capacity for most cable types. The delivery includes the
snap-on profiles including elastic clamping profiles, which contribute to secure fastening and sealing.
Technology Explained Simply
The profile is simply snapped onto the base plates without additional fastening elements. The elastic clamping profiles ensure a secure fit and tight connection. The full-surface contact minimizes the risk of cable damage due to uneven loading. The combination with a cable strain relief rail enables optimal adaptation between the cable entry and the mounting plate, making the installation more efficient and error-free.
Compatibility and Accessories
The profile is specifically designed for enclosures with a width of 600 mm. From a cabinet width of 1000 mm, the base group is divided into two sections, allowing a cable entry point to be installed on both sides. Compatible accessories include
C-profile rails 30/15 EN 60 715 TS L555 mm and
VX cable strain relief rail, angle profile, W: 600 mm, which can be used for additional cable routing and fixation.
Mounting and Installation
Installation is performed by snapping the profile onto the designated base plates.
Two pieces per cable entry point are required. The installation is simple and does not require additional tools or mounting aids. The elastic clamping profiles ensure a secure connection and prevent the profile from shifting during operation.
Advantages in Operation
Using the VX 8618.800 reduces installation time and minimizes the risk of cable damage due to inadequate routing. The high sealing protects the interior of the enclosure from environmental influences. The materials are designed for industrial use and ensure a long service life under normal operating conditions. The combination with additional accessories such as the cable strain relief rail enables a flexible and adaptable installation that meets the requirements of various projects.