Rittal 8618250, EAN: 4028177921788

Rittal 8618250 VX Comfort Handle for Profile Cylinder

Industrial Material > Enclosures / Chassis > System Accessories

Rittal 8618250 VX Comfort Handle for Profile Cylinder

Lieske Part No. 1440905
Mfg Part No 8618250
EAN-Code 4028177921788
Manufacturer Rittal
Here only 38,72 EUR
46,08 EUR incl. VAT

Further information for Rittal 8618250 VX Comfort Handle for Profile Cylinder

General
ModelFor profile half-cylinder
Materialzinc die-cast
ColourRAL 7035
Note on part numberPrepared for installation of profile half-cylinders 40 or 45 mm total length (according to DIN 18 252)
LockLocking mechanism: Prepared for installation of profile half-cylinders 40 or 45 mm total length (according to DIN 18 252) or security and push-button inserts with a length of 40 mm
Suitable for housing typeVX, VX IT
Type rating according to UL 50EType 1, Type 3, Type 3R, Type 4, Type 12
The Rittal VX 8618.250 is a comfort handle for enclosures of type VX and VX IT, made of zinc die-cast and in the colour RAL 7035. It is specifically designed for the installation of profile half-cylinders and serves as an access element for industrial enclosures. The folding mechanism of the handle ensures that it does not require any swing clearance, allowing the door surface to be optimally utilised for installations. Installation is simple and quick via a snap-in handle system that enables secure fastening without additional tools.

Applications
This handle is intended for use in industrial environments, particularly in enclosures of the VX and VX IT series. It is suitable for applications requiring secure and space-saving door opening. The construction is suitable for use in indoor and outdoor environments, with the exact environmental requirements determined by the respective enclosure design. Use in combination with profile half-cylinders or safety and push-button lock inserts allows flexible adaptation to different security requirements.

Functions and Equipment in Detail
The handle is designed for installation of profile half-cylinders with a total length of 40 mm or 45 mm (according to DIN 18 252). Alternatively, it can also be combined with safety and push-button lock inserts of 40 mm length. This design allows adaptation to various locking types, with the exact selection depending on specific requirements for access security and operability. The material choice of zinc die-cast ensures high mechanical stability and durability under industrial conditions.

Technology Explained Simply
The folding mechanism of the handle means that it lies flat against the door surface when not in use. This minimises space requirements at the door edge, which is particularly advantageous in tight enclosure configurations. The snap-in mounting system allows for quick and secure fastening without additional fastening elements. The colour RAL 7035 corresponds to a grey-beige standard tone that integrates well into industrial environments. The zinc die-cast material provides sufficient strength and corrosion resistance for use in industrial facilities.

Compatibility and Accessories
The handle is specifically designed for enclosures of types VX and VX IT. It is compatible with profile half-cylinders of lengths 40 mm and 45 mm (according to DIN 18 252) as well as with safety and push-button lock inserts of 40 mm length. As accessories, various profile half-cylinder handle systems and lock inserts such as SZ 2467000 Ergoform-S safety or safety and push-button lock insert 2468000 are available. These components can be combined according to requirements for access security and operating comfort.

Installation and Mounting
Installation is performed via a snap-in system that enables quick and secure fastening to the enclosure door. No additional fastening elements or tools are required. Installation is carried out directly at the designated mounting position on the door, with exact positioning determined by the handle and door construction. The folding mechanism ensures that the handle lies flat after opening the door and does not occupy additional space within the enclosure area.

Operational Advantages
The handle provides a space-saving solution for access to enclosures, as it does not require any swing clearance. The simple installation via the snap-in system reduces installation effort. The use of zinc die-cast ensures high mechanical stability and durability. Compatibility with various locking types allows flexible adaptation to different security requirements. The colour RAL 7035 integrates well into industrial environments and supports a uniform design of enclosures.

Type rating according to UL 50E
The handle meets the requirements of Type ratings Type 1, Type 3, Type 3R, Type 4 and Type 12 according to UL 50E, confirming its suitability for various environmental conditions in industrial facilities. These approvals include protection against dust, splashing water and other environmental influences, with the exact application depending on the respective enclosure design. Certification by UL + C-UL (listed) as well as UL + C-UL - FTTA confirms compliance with international safety standards.

Material and Colour
The zinc die-cast material provides sufficient strength and corrosion resistance for use in industrial environments. The colour RAL 7035 is a grey-beige standard tone that integrates well into industrial facilities. The surface is smooth and easy to clean, facilitating maintenance. The material selection ensures a long service life under normal operating conditions.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1440905
qrcode für Rittal 8618250 VX Comfort Handle for Profile Cylinder