| General |
| Material | Sheet steel, 2.5 mm |
| Surface protection | Zinc-plated |
| Scope of delivery | Including mounting hardware |
| Suitable for door width | 600 mm |
| Mounting options | Installation can be either vertical as upright mounting surface or horizontal as flat floor; mounting is directly to cabinet profile; with pre-assembled construction, mounting is via system chassis at any mounting level within the cabinet; with multi-level installation of partial mounting plates in sequence, these can be hinged for quick access to rear levels |
| Note | For installation in VX SE, PC, IW, the VX adapter rail is required |
| Width | 500 mm |
| Depth | 300 mm |
| Suitable for housing type | VX, VX SE, PC |
| Suitable for | Enclosure type: VX, VX SE, PC, Width: = 400 mm, = 600 mm, Depth: = 400 mm, = 600 mm |
| PCF/VE (Cradle-to-Gate) | 16.8 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
Rittal VX 8617.510 is a
partial mounting plate made of
sheet steel with a thickness of 2.5 mm, designed for use in enclosures of type VX, VX SE and PC. The plate serves to mount additional components within the enclosure and provides a flexible mounting surface for various applications. With dimensions of 500 mm width and 300 mm depth, it is particularly suitable for enclosures with a door width of 600 mm. The surface is
zinc-coated, ensuring a corrosion-resistant and durable coating.
Applications
The partial mounting plate is used in industrial electrical and IT installations where additional mounting surfaces are required for assemblies, controls, network components or other electronic modules. It enables a structured and clear arrangement of devices within the enclosure, thereby facilitating maintenance and servicing. The plate is suitable for enclosures with a width of 400 mm or 600 mm and a depth of 400 mm or 600 mm.
Functions and Equipment in Detail
The mounting plate can be installed either
vertically as a standing surface or
horizontally as a flat base. The fastening is done directly to the enclosure profile. In a pulled-out construction, the plate can be mounted at any mounting level within the enclosure using system chassis. For multi-level installations, where multiple plates are arranged in sequence, a hinge mounting can be used to quickly access the rear levels. The delivery includes the
fastening material.
Technology Explained Simply
The use of
sheet steel with a thickness of 2.5 mm ensures high mechanical stability and load capacity for the mounted components. The
zinc-coated surface protects the material from corrosion, especially in environments with high humidity or aggressive atmosphere. The dimensions of 500 mm width and 300 mm depth provide sufficient space for standard and compact modules. The flexible mounting allows individual adaptation to the respective enclosure configuration.
Compatibility and Accessories
The partial mounting plate is intended for enclosure types
VX, VX SE and PC. For installation in VX SE, PC and IW, the
VX adapter rail is required. The plate is not intended for other enclosure types not listed in the compatibility list. The use of the adapter rail enables secure and standardized mounting in these enclosure types.
Mounting and Installation
Mounting is done either directly to the enclosure profile or via system chassis in a pulled-out construction. Fastening is done using the material included in the delivery. In multi-level arrangements, the plate can be mounted pivotably via hinges to facilitate access to rear levels.
Advantages in Operation
The partial mounting plate provides a flexible and stable mounting surface that improves structuring within the enclosure. The option to mount the plate pivotably facilitates maintenance and inspection of components located behind it. The zinc-coated surface ensures long service life and low maintenance. Compatibility with various enclosure types increases application flexibility in industrial environments.