Rittal 8245000, EAN: 4028177813564

Rittal 8245000 VX 8245.000 enclosure 2-door

Industrial Material > Enclosures / Chassis > Switchboard-Systems

Rittal 8245000 VX 8245.000 enclosure 2-door

Lieske Part No. 1440723
Mfg Part No 8245000
EAN-Code 4028177813564
Manufacturer Rittal
Here only 787,75 EUR
937,42 EUR incl. VAT

Further information for Rittal 8245000 VX 8245.000 enclosure 2-door

General
MaterialCabinet frame: steel sheet, 1.5 mm, roof: steel sheet, 1.5 mm, door: steel sheet, 2.0 mm, rear panel: steel sheet, 1.5 mm, base plates: steel sheet, 1.5 mm, mounting plate: steel sheet, 3.0 mm
Surface protectionCabinet frame: dip-primed, door, roof and rear panel: dip-primed, externally powder-coated, textured lacquer, mounting plate and base sheets: galvanised
ColourRAL 7035
Scope of deliverycabinet frame, door(s), door hinge right, reversible to left, roof sheet, rear panel, floor sheets, mounting plate, 2 mounting rails 18 x 39 mm, lock: 3 mm double bar
Width1.200 mm
Height1.400 mm
Depth500 mm
Mounting plate dimensions (W x H)1.099 mm x 1.296 mm
Degree of protection IP according to EN 60 529IP 55
NEMA degree of protectionNEMA 1, NEMA 12
Type rating according to UL 50EType 1, Type 12
IK codeIK10
Number of doors2
Base materialsteel sheet
PCF/VE (Cradle-to-Gate)367.57 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal bayed enclosure system VX 8245.000 is an industrial enclosure made of sheet steel, designed for use in plant and automation technology. The system features a symmetrical profile frame construction with two front doors, a rear panel, a roof plate, divided base plates, and an integrated mounting plate. Dimensions are 1,200 mm width, 1,400 mm height, and 500 mm depth, with the mounting plate measuring 1,099 mm × 1,296 mm. The enclosure frame is made of 1.5 mm thick sheet steel, the doors of 2.0 mm thick sheet steel, while the mounting plate is made of 3.0 mm thick sheet steel. The surface of the enclosure frame is dip-primed, the doors, roof, and rear panel are externally powder-coated with textured lacquer in the colour RAL 7035. The mounting plate and base plates are galvanized.

Applications
This enclosure system is designed for use in industrial environments where high mechanical load capacity and protection against dust and splashing water are required. It is suitable for use in production plants, automation systems, power supply installations, and other technical installations where secure and accessible mounting of electrical and electronic components is necessary. The construction allows for bayed mounting, enabling multiple enclosures to be arranged in a row to create larger systems.

Functions and Equipment in Detail
The enclosure system is supplied with a double-door front closure, with door hinges standardly mounted on the right, but toollessly switchable to the left. The doors are fitted with a PU foam seal to ensure a tight closure. The locking is achieved via a 3 mm double-barrel lock according to DIN 43668, enabling a four-point locking mechanism. The secondary door is additionally secured with a swing lever for double locking. The door opening is standardly 130° and can be toollessly extended to 180°. The clearance from the floor is 17 mm.

Technology Explained Simply
The protection rating IP 55 according to EN 60 529 ensures protection against dust and splashing water from any direction, making the enclosure system suitable for use in damp or dusty environments. The protection ratings NEMA 1 and NEMA 12, as well as the type rating according to UL 50E (Type 1 and Type 12), correspond to international standards for indoor use and protection against splashing water. The IK code IK10 means the enclosure is resistant to mechanical impacts up to 10 joules, indicating high mechanical strength. The mounting plate is adjustable in depth in 25 mm increments, allowing flexible adaptation to different components. Integrated plastic glides and reusable mounting rails facilitate positioning and securing of components.

Compatibility and Accessories
The enclosure system is compatible with various accessories that extend its use in different application scenarios. These include levelling feet M12 with an adjustment height of 18–43 mm, TS mounting rails for the external mounting plane, C-profile rails 30/15 according to EN 60715, VX partial mounting plates, cable routing spaces, transport eyes, VX base plates, comfort handles for various locking systems (e.g. half cylinder, ASSA, padlock), dust protection strips, cable entry ferrules in various diameters (e.g. 13 mm, 21 mm), multi-locking systems for padlocks, circuit diagram pockets in various depths (T600 mm, T90 mm), and an AS Multitool AX/VX. These accessories enable individual adaptation of the enclosure to specific mounting and protection requirements.

Mounting and Installation
Mounting is done via the integrated mounting planes, accessible from both inside and outside. The frame profiles are perforated in a 25 mm grid, enabling flexible fixation of components. The base plates are divided into three parts, removable and replaceable, allowing easy cleaning and maintenance. The rear panel and roof plate are removable and fitted with PU foam seals to ensure a tight closure. Electrical conductivity between frame, rear panel, roof, and base plates ensures automatic equipotential bonding according to DIN 62 208. Fixation to the floor is achieved via the welded base frame with integrated base reinforcement.

Advantages in Operation
The enclosure system offers high mechanical stability and load capacity up to 15,000 N. The double door construction with lockable closures ensures secure access and protection of installed components. The depth-adjustable mounting plate and integrated mounting planes enable flexible and space-saving installation. The use of sheet steel in various wall thicknesses ensures high strength and durability. The surface coating with textured lacquer in RAL 7035 provides good corrosion protection and visual harmony in industrial environments. The integrated seals and IP 55 protection rating protect internal components from environmental influences. The bayed construction allows modular expansion of installations, simplifying maintenance and system upgrades.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1440723
qrcode für Rittal 8245000 VX 8245.000 enclosure 2-door