| General |
| Model | without roof sheet |
| Material | Plastic |
| Colour | RAL 9005 |
| Scope of delivery | fan, protective grille, including mounting material, installation and quick start guide |
| Airflow (at operating point) | 150 m³/h |
| Rated operating voltage | 24 V (DC) |
| Rated current max. | At 50 Hz: 0.32 A, At 60 Hz: 0.32 A |
| Width | 119 mm |
| Height | 25 mm |
| Depth | 119 mm |
| Degree of protection IP according to IEC 60 529 | IP 20 |
| Rotational speed | 100 % |
| Note | Reduction of specified air flow to 150 m³/h at 25 Pa back pressure |
| Sound pressure level (at operating point) | 44 dB(A) |
| Operating temperature range | 5 °C...55 °C |
| Nominal power | 7,7 W |
The Rittal SK 7990.000 is a
fan extension kit with integrated
speed controller, specifically developed for installation in fan modules of the 5503.xxx series (e.g. 5503.010, 5503.020, 5503.025). It is designed to extend cooling capacity in enclosures and IT systems, particularly within the VX IT and TS IT product lines. The complete solution is
ready-to-connect and enables energy-efficient fan control via a pre-set characteristic curve, allowing airflow to be optimised according to operating conditions. It is intended for use in indoor environments where controlled ventilation is required, and is designed for operation within a temperature range of 5 °C to 55 °C.
Applications
The fan extension kit is primarily intended for use in industrial enclosures and IT infrastructures, particularly in systems equipped with Rittal fan modules 5503.xxx. It is used to increase cooling capacity when heat generation rises or to adapt to specific airflow requirements. The integrated speed control enables adjustable cooling performance that matches the actual load in the enclosure, resulting in potential energy savings. Use is restricted to indoor environments, as the IP 20 protection rating does not offer protection against dust or water.
Functions and Equipment in Detail
The fan extension kit features an
integrated speed controller that regulates fan speed according to a pre-set characteristic curve. This allows precise adjustment of airflow to match the respective operating conditions. Airflow at operating point is 150 m³/h at a back pressure of 25 Pa, while free-blown airflow reaches 192 m³/h. The sound pressure level at operating point is 44 dB(A), ensuring relatively quiet operation. The rated operating voltage is 24 V (DC), and the maximum rated current is 0.32 A, regardless of frequency (50 Hz or 60 Hz). The nominal power of the device is 7.7 W.
Technology Explained Simply
The integrated speed control operates using a pre-set characteristic curve, adjusting fan speed based on temperature or other parameters. This ensures airflow is maintained only at the level required for cooling, enhancing energy efficiency. The airflow of 150 m³/h at 25 Pa back pressure corresponds to performance under realistic operating conditions, while the free-blown airflow of 192 m³/h represents maximum airflow without resistance. The IP 20 protection rating means the device is protected against contact with fingers and against solid foreign objects larger than 12.5 mm, but not against dust or water. The operating temperature range of 5 °C to 55 °C covers typical indoor conditions.
Compatibility and Accessories
The fan extension kit is specifically designed for installation in Rittal fan modules 5503.010, 5503.020, and 5503.025. It is part of the VX IT and TS IT product families and can be used to extend the cooling capacity of these modules. Compatibility is limited to these model series due to specific dimensions (W x H x D: 119 x 25 x 119 mm) and mounting requirements.
Mounting and Installation
Installation is carried out directly into the designated fan modules 5503.xxx. The delivery includes the fan, a protective grille, mounting hardware, and an installation and quick operating manual. The installation is ready-to-connect, meaning no additional electrical or mechanical adjustments are required. Mounting is performed using the included hardware, which is designed for installation in the modules. The manual contains the necessary steps for correct installation and commissioning.
Operational Advantages
The use of the fan extension kit provides
energy-efficient cooling through the integrated speed control, which adjusts airflow to match the actual load. The pre-set characteristic curve ensures optimised cooling performance without unnecessary energy consumption. The quiet operation, with a sound pressure level of 44 dB(A) at operating point, is suitable for environments requiring low noise levels. International approval and multi-voltage capability enable worldwide use, with a rated voltage of 24 V (DC). The dimensions of 119 x 25 x 119 mm fit precisely into the designated modules, ensuring easy integration.