Rittal 7979511, EAN: 4028177948303

Rittal 7979511 PDU metered+ basic power distribution BLT44x1095x70 CEE7/

Rittal 7979511 PDU metered+ basic power distribution BLT44x1095x70 CEE7/

Lieske Part No. 1867237
Mfg Part No 7979511
EAN-Code 4028177948303
Manufacturer Rittal
Here only 1.213,94 EUR
1.444,59 EUR incl. VAT

Further information for Rittal 7979511 PDU metered+ basic power distribution BLT44x1095x70 CEE7/

General
ModelPDU, metered plus
MaterialAluminium profile, black anodised, mounting slots: plastic
Scope of deliveryIncluding mounting hardware
OptionsOvervoltage protection Type 3 with replaceable diverters during operation, with status monitoring, integrable in PDU housing, differential current measurement (Type B) per input/phase/fuse, monitoring of optional overvoltage protection, CMC III CAN-Bus sensors for environment monitoring connectable, max. 16 sensors, other housing colours available
Description of measurement functionsMeasurement per phase or input, additional measurement per output socket, powerful CPU (ARM Cortex A8), digital input (potential-free contact), additional alarm output/relay output (changeover contact)
Width44 mm
Depth70 mm
Length1.095 mm
Number of sockets and type10 x Schuko (Type F, CEE 7/3)
Socket outlets10 x Schuko
Rated operating voltage230 V (AC)
Rated current (max.)16 A
Nominal power3,7 kW
Power suppliesNumber: 1, Phases per input: 1~
Connection cable length3 m
Electrical connection typeCEE
InterfacesUSB 2.0 port (USB-A) for mass configuration, firmware update & data logging, CAN-Bus interface (RJ45) for max. 16 environment sensors, serial interface RS232 (RJ12) for LTE unit, scripting, CLI, use of own certificates/TLS 1.2, email sending on alarm (SMTP), user management including rights management, LDAP(S)/Radius/Active Directory integration, Syslog server integration (max. 2 servers), fully redundant Ethernet interface 10/100/1000 Mbit/s
PoliciesEMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU
StandardsEN 62368-1, EN 61000-3, EN 61000-4, EN 61000-6, EN 62053-21
ProtocolsWeb server (HTTP, HTTPS, SSL) SSH, Telnet, NTP, TCP/IP v4 & v6, DHCP, DNS, SNMP v1, v2c & v3, Modbus/TCP, OPC-UA, MIB for integration into 3rd party DCIM software, FTP/SFTP (update/file transfer)
Operating temperature range5 °C...50 °C
Humidity (non-condensing)10...95 %
Storage temperature range-20 °C...70 °C
Suitable forHousing type: VX IT cabinet frame: ≥ 1,200 mm, housing type: VX IT 19"-profile rails: ≥ 1,800 mm
The Rittal DK 7979511 is a PDU (Power Distribution Unit) of the metered plus type, designed as an intelligent power distribution unit for IT network and server racks. The device enables precise energy measurement per individual outlet socket, allowing the power demand of individual consumers to be monitored. The unit is housed in a compact aluminium profile housing with a black anodized surface and features 10 Schuko sockets (Type F, CEE 7/3). The rated operating voltage is 230 V (AC), with a maximum rated current of 16 A, corresponding to a rated power of 3.7 kW. Power supply is via a CEE connection cable with a length of 3 m. The PDU is self-powered and does not require external power supply. The integrated real-time clock is buffered by a replaceable battery with a lifespan of up to 10 years. Measurement accuracy is ±1 % (kWh) in accordance with standard EN 62053-21.

Applications

The PDU is designed for use in IT infrastructures, particularly in racks of the Rittal VX IT type. When mounted vertically, it can be installed tool-free in the Zero-U-Space of VX IT or TS IT racks. The unit is suitable for enclosure types with a cabinet frame of at least 1,200 mm or 48,3 cm ( 19 inch ) profile rails of at least 1,800 mm. The phase colour coding (L1=pink, L2=black, L3=white) facilitates identification and maintenance. The PDU is designed for indoor use, with an operating temperature range of 5 °C to 50 °C and humidity of 10 % to 95 % (non-condensing).

Functions and Equipment in Detail

The PDU features a bright TFT display with 128x128 pixels (RGB) and backlighting, showing performance data and basic configuration. The display is rotatable by 180° and replaceable, ensuring correct display orientation when mounted vertically. Multicoloured LEDs (green/yellow/red) indicate the switching state and threshold values per outlet socket. An integrated electromagnetic buzzer enables acoustic alarm signalling. Voltage, current, and power thresholds can be individually set per outlet socket. The PDU offers an integrated, fully redundant power supply, which can be powered from all phases, ensuring fault-tolerant operation.

Technology Explained Simply

The PDU is equipped with a powerful CPU (ARM Cortex A8) that handles measurement and control functions. Measurement functions include voltage, current, frequency, active power, active energy, apparent power, apparent energy, power factor (cosPhi), phase angle, and neutral conductor current measurement for unbalanced load detection. For PDUs with integrated fuses, fuse monitoring is performed. The PDU features a digital input (potential-free contact) and an additional alarm output/relay output (changeover) for external signals. Power supply is via an integrated, fully redundant power supply unit, which can be powered from all phases.

Compatibility and Accessories

The PDU is expandable with a variety of options. These include a Type 3 surge protection device with replaceable discharge elements during operation, which can be integrated into the housing, as well as residual current measurement (Type B) per input/phase/fuse. Monitoring of the optional surge protection device is also possible. The PDU supports connection of CMC III CAN-Bus sensors for environmental monitoring, with up to 16 sensors connectable. Suitable accessories include, among others, combination locks, CAN-Bus connection cables, covers for socket strips, mounting adapters, and the CMC III Online comfort handle VX with master key function.

Mounting and Installation

Mounting is tool-free in the Zero-U-Space of Rittal VX IT or TS IT racks. The delivery includes the necessary mounting material. Vertical mounting is standard, with the display rotatable by 180° to ensure correct display. The PDU is designed for use in racks with a minimum length of 1,200 mm (cabinet frame) or 1,800 mm (48,3 cm ( 19 inch ) profile rails).

Operational Advantages

The PDU offers high measurement accuracy and enables detailed energy measurement per outlet socket, which is beneficial for energy efficiency and load distribution in data centres. The integrated real-time clock with battery backup ensures continuous time measurement even during power failure. The fully redundant power supply increases reliability. Network interfaces enable remote monitoring and control, allowing the PDU to be integrated into existing DCIM systems. The use of protocols such as SNMP, Modbus/TCP, OPC-UA, and MIB facilitates integration into third-party systems. The PDU also supports email alerts on alarm (SMTP), user management with rights management, and integration with LDAP(S), Radius, or Active Directory. The serial interface RS232 (RJ12) enables use for LTE units, scripting, and CLI. The USB 2.0 interface (USB-A) is used for mass configuration, firmware updates, and data logging. The CAN-Bus interface (RJ45) enables connection of up to 16 environmental sensors. The PDU is designed for indoor use, with an operating temperature range of 5 °C to 50 °C and humidity of 10 % to 95 % (non-condensing). The storage temperature range is -20 °C to 70 °C. The PDU complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU, as well as standards EN 62368-1, EN 61000-3, EN 61000-4, EN 61000-6, and EN 62053-21. Protocols include web server (HTTP, HTTPS, SSL), SSH, Telnet, NTP, TCP/IP v4 & v6, DHCP, DNS, SNMP v1, v2c & v3, Modbus/TCP, OPC-UA, MIB for integration into third-party DCIM software, and FTP/SFTP (update/file transfer). The PDU is designed for use in IT infrastructures, particularly in racks of the Rittal VX IT type. When mounted vertically, it can be installed tool-free in the Zero-U-Space of VX IT or TS IT racks. The unit is suitable for enclosure types with a cabinet frame of at least 1,200 mm or 48,3 cm ( 19 inch ) profile rails of at least 1,800 mm. The phase colour coding (L1=pink, L2=black, L3=white) facilitates identification and maintenance. The PDU is designed for indoor use, with an operating temperature range of 5 °C to 50 °C and humidity of 10 % to 95 % (non-condensing). The PDU features a bright TFT display with 128x128 pixels (RGB) and backlighting, showing performance data and basic configuration. The display is rotatable by 180° and replaceable, ensuring correct display orientation when mounted vertically. Multicoloured LEDs (green/yellow/red) indicate the switching state and threshold values per outlet socket. An integrated electromagnetic buzzer enables acoustic alarm signalling. Voltage, current, and power thresholds can be individually set per outlet socket. The PDU offers an integrated, fully redundant power supply, which can be powered from all phases, ensuring fault-tolerant operation. The PDU is equipped with a powerful CPU (ARM Cortex A8) that handles measurement and control functions. Measurement functions include voltage, current, frequency, active power, active energy, apparent power, apparent energy, power factor (cosPhi), phase angle, and neutral conductor current measurement for unbalanced load detection. For PDUs with integrated fuses, fuse monitoring is performed. The PDU features a digital input (potential-free contact) and an additional alarm output/relay output (changeover) for external signals. Power supply is via an integrated, fully redundant power supply unit, which can be powered from all phases. The PDU is expandable with a variety of options. These include a Type 3 surge protection device with replaceable discharge elements during operation, which can be integrated into the housing, as well as residual current measurement (Type B) per input/phase/fuse. Monitoring of the optional surge protection device is also possible. The PDU supports connection of CMC III CAN-Bus sensors for environmental monitoring, with up to 16 sensors connectable. Suitable accessories include, among others, combination locks, CAN-Bus connection cables, covers for socket strips, mounting adapters, and the CMC III Online comfort handle VX with master key function. Mounting is tool-free in the Zero-U-Space of Rittal VX IT or TS IT racks. The delivery includes the necessary mounting material. Vertical mounting is standard, with the display rotatable by 180° to ensure correct display. The PDU is designed for use in racks with a minimum length of 1,200 mm (cabinet frame) or 1,800 mm (48,3 cm ( 19 inch ) profile rails). The PDU offers high measurement accuracy and enables detailed energy measurement per outlet socket, which is beneficial for energy efficiency and load distribution in data centres. The integrated real-time clock with battery backup ensures continuous time measurement even during power failure. The fully redundant power supply increases reliability. Network interfaces enable remote monitoring and control, allowing the PDU to be integrated into existing DCIM systems. The use of protocols such as SNMP, Modbus/TCP, OPC-UA, and MIB facilitates integration into third-party systems. The PDU also supports email alerts on alarm (SMTP), user management with rights management, and integration with LDAP(S), Radius, or Active Directory. The serial interface RS232 (RJ12) enables use for LTE units, scripting, and CLI. The USB 2.0 interface (USB-A) is used for mass configuration, firmware updates, and data logging. The CAN-Bus interface (RJ45) enables connection of up to 16 environmental sensors. The PDU is designed for indoor use, with an operating temperature range of 5 °C to 50 °C and humidity of 10 % to 95 % (non-condensing). The storage temperature range is -20 °C to 70 °C. The PDU complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU, as well as standards EN 62368-1, EN 61000-3, EN 61000-4, EN 61000-6, and EN 62053-21. Protocols include web server (HTTP, HTTPS, SSL), SSH, Telnet, NTP, TCP/IP v4 & v6, DHCP, DNS, SNMP v1, v2c & v3, Modbus/TCP, OPC-UA, MIB for integration into third-party DCIM software, and FTP/SFTP (update/file transfer).
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1867237
qrcode für Rittal 7979511 PDU metered+ basic power distribution BLT44x1095x70 CEE7/