| General |
| Model | PDU, managed |
| Material | Aluminium profile, black anodised, mounting slots: plastic |
| Scope of delivery | Including mounting hardware |
| Options | Overvoltage protection Type 3 with replaceable diverters during operation, with status monitoring, integrable in PDU housing, differential current measurement (Type B) per input/phase/fuse, monitoring of optional overvoltage protection, CMC III CAN-Bus sensors for environment monitoring connectable, max. 16 sensors, other housing colours available |
| Width | 44 mm |
| Depth | 70 mm |
| Length | 1.895 mm |
| Number of sockets and type | 36 x C13 / 6 x C19 |
| Socket outlets | 36 x C 13, 6 x C 19 |
| Rated operating voltage | 400 V (AC) |
| Rated current (max.) | 16 A |
| Nominal power | 11 kW |
| Power supplies | Number: 1, phases per input: 3~ |
| Connection cable length | 3 m |
| Electrical connection type | CEE |
| Interfaces | USB 2.0 port (USB-A) for mass configuration, firmware update & data logging, CAN-Bus interface (RJ45) for max. 16 environment sensors, serial interface RS232 (RJ12) for LTE unit, scripting, CLI, use of own certificates/TLS 1.2, email sending on alarm (SMTP), user management including rights management, LDAP(S)/Radius/Active Directory integration, Syslog server integration (max. 2 servers), fully redundant Ethernet interface 10/100/1000 Mbit/s |
| Policies | EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU |
| Standards | EN 62368-1, EN 61000-3, EN 61000-4, EN 61000-6, EN 62053-21 |
| Protocols | Web server (HTTP, HTTPS, SSL) SSH, Telnet, NTP, TCP/IP v4 & v6, DHCP, DNS, SNMP v1, v2c & v3, Modbus/TCP, OPC-UA, MIB for integration into 3rd party DCIM software, FTP/SFTP (update/file transfer) |
| Operating temperature range | 5 °C...50 °C |
| Humidity (non-condensing) | 10...95 % |
| Storage temperature range | -20 °C...70 °C |
| Suitable for | Cabinet type: VX IT cabinet frame: ≥ 2,000 mm, cabinet type: VX IT 19"-profile rails: ≥ 2,200 mm |
Rittal DK 7979440 is a
managed PDU (Power Distribution Unit) for use in IT network and server racks. It is designed for power distribution and monitoring in 19-inch systems and provides comprehensive energy measurement and switching functions for each individual outlet socket. The device is housed in a compact aluminium profile with a black anodized surface and has an overall length of 1,895 mm, a width of 44 mm, and a depth of 70 mm. Power supply is via a CEE plug (16 A/32 A) with a rated operating voltage of 400 V (AC). The maximum rated power is 11 kW at a rated current of 16 A. The PDU is designed for three-phase input and features 36 C13-type sockets and 6 C19-type sockets, all made of plastic.
Applications
The PDU is specifically designed for use in IT infrastructures, particularly in Rittal VX IT or TS IT racks. When mounted vertically, it can be installed tool-free in the Zero-U-Space, enabling flexible positioning within the rack. The phase colour coding (L1=pink, L2=black, L3=white) supports assignment and maintenance. The PDU is suitable for enclosure types with a cabinet frame ≥ 2,000 mm or 19-inch profile rails ≥ 2,200 mm.
Functions and Equipment in Detail
The DK 7979440 features an integrated control and display unit with a bright TFT display (128x128 pixels, RGB, with backlight) for displaying power data and basic configuration. The display is rotatable by 180° and replaceable. Multicoloured LEDs (green/yellow/red) indicate the switching status and limit values for each outlet socket. An integrated electromagnetic buzzer enables acoustic alarm signalling. The PDU is self-powered, requires no external power supply, and features an integrated, fully redundant power supply unit fed from all phases. Measurement accuracy is ±1 % (kWh) according to EN 62053-21.
Technology Explained Simply
The PDU allows individual setting of limit values for voltage, current, and power for each outlet socket. Switching functions are programmable, for example, for sequential power-on after voltage recovery to avoid overloading peaks. Relay states are retained even during power failure. The PDU features bistable relays, enabling low power consumption and high switching capacity, even for inrush currents up to 300 A. The integrated real-time clock with battery backup (up to 10 years, replaceable) ensures accurate timing for measurements and logs.
Compatibility and Accessories
The PDU is equipped with a variety of interfaces: a USB 2.0 interface (USB-A) for mass configuration, firmware updates, and data logging; a CAN-Bus interface (RJ45) for connecting up to 16 CMC III environmental sensors; and a serial RS232 interface (RJ12) for LTE unit, scripting, and CLI. The network interface is fully redundant and supports 10/100/1000 Mbit/s. Supported protocols include HTTP/HTTPS, SSH, Telnet, NTP, TCP/IP v4 & v6, DHCP, DNS, SNMP v1, v2c & v3, Modbus/TCP, OPC-UA, MIB for integration into DCIM software, and FTP/SFTP for file transfers. The PDU can be optionally expanded with surge protection modules Type 3 (with replaceable discharge elements during operation) and differential current measurement (Type B) per input/phase/fuse. Integrated monitoring of the optional surge protection is provided. Additionally, CMC III CAN-Bus sensors can be connected to monitor environmental parameters such as temperature or humidity.
Mounting and Installation
Mounting is tool-free in the Zero-U-Space of Rittal VX IT or TS IT racks. The delivery includes mounting hardware. The supply cable has a length of 3 m and is fitted with a CEE plug. The PDU is designed for use in environments with an operating temperature of 5 °C to 50 °C and relative humidity of 10 % to 95 % (non-condensing). Storage temperature is -20 °C to 70 °C.
Operational Advantages
The DK 7979440 offers high operational reliability through redundant power supply and fault-tolerant architecture. Detailed energy measurement per outlet socket enables precise load monitoring and optimization of energy efficiency. The integrated user management with rights management, LDAP(S)/Radius/Active Directory integration, and Syslog server connection (up to 2 servers) supports integration into existing IT management systems. E-mail alerts (SMTP) and support for TLS 1.2 for secure communication enhance operational safety. The PDU is designed for use in professional IT environments where reliable power distribution and monitoring are required.