Rittal 7979411, EAN: 4028177948082

Rittal 7979411 PDU managed 16 A 230 V

19 Inch-Technology > Accessories/Equipment > Energy Management

Rittal 7979411 PDU managed 16 A 230 V

Lieske Part No. 593565
Mfg Part No 7979411
EAN-Code 4028177948082
Manufacturer Rittal
Here only 1.256,90 EUR
1.495,71 EUR incl. VAT

Further information for Rittal 7979411 PDU managed 16 A 230 V

General
ModelPDU, managed
MaterialAluminium profile, black anodised, mounting slots: plastic
Scope of deliveryIncluding mounting hardware
OptionsOvervoltage protection Type 3 with replaceable diverters during operation, with status monitoring, integrable in PDU housing, differential current measurement (Type B) per input/phase/fuse, monitoring of optional overvoltage protection, CMC III CAN-Bus sensors for environment monitoring connectable, max. 16 sensors, other housing colours available
Width44 mm
Depth70 mm
Length1.095 mm
Number of sockets and type10 x Schuko (Type F, CEE 7/3)
Socket outlets10 x Schuko
Rated operating voltage230 V (AC)
Rated current (max.)16 A
Nominal power3,7 kW
Power suppliesNumber: 1, Phases per input: 1~
Connection cable length3 m
Electrical connection typeCEE
InterfacesUSB 2.0 port (USB-A) for mass configuration, firmware update & data logging, CAN-Bus interface (RJ45) for max. 16 environment sensors, serial interface RS232 (RJ12) for LTE unit, scripting, CLI, use of own certificates/TLS 1.2, email sending on alarm (SMTP), user management including rights management, LDAP(S)/Radius/Active Directory integration, Syslog server integration (max. 2 servers), fully redundant Ethernet interface 10/100/1000 Mbit/s
PoliciesEMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU
StandardsEN 62368-1, EN 61000-3, EN 61000-4, EN 61000-6, EN 62053-21
ProtocolsWeb server (HTTP, HTTPS, SSL) SSH, Telnet, NTP, TCP/IP v4 & v6, DHCP, DNS, SNMP v1, v2c & v3, Modbus/TCP, OPC-UA, MIB for integration into 3rd party DCIM software, FTP/SFTP (update/file transfer)
Operating temperature range5 °C...50 °C
Humidity (non-condensing)10...95 %
Storage temperature range-20 °C...70 °C
Suitable forHousing type: VX IT cabinet frame: ≥ 1,200 mm, housing type: VX IT 19"-profile rails: ≥ 1,800 mm
The Rittal DK 7979411 is a managed PDU (Power Distribution Unit) for use in IT network and server racks. It provides power distribution and offers comprehensive energy measurement and monitoring functions for each individual output socket. The unit is housed in a compact aluminium profile with a black anodised surface and features 10 Schuko sockets (Type F, CEE 7/3). Power supply is via a CEE plug with a rated operating voltage of 230 V (AC) and a nominal current of 16 A, corresponding to a nominal power of 3.7 kW. The PDU is self-powered and does not require an external power supply.

Applications

The PDU is specifically designed for use in IT infrastructures, particularly in racks of the Rittal VX IT type. When mounted vertically, it can be installed toollessly in the Zero-U-Space of VX IT or TS IT racks. The unit is suitable for enclosure types with a cabinet frame width of at least 1,200 mm or 48,3 cm ( 19 inch ) profile rails with a length of at least 1,800 mm. The phase colour coding (L1=pink, L2=black, L3=white) supports assignment and maintenance.

Functions and Equipment in Detail

The PDU features an integrated control and display unit with a bright TFT display (128x128 pixels, RGB, with backlighting) showing performance data and basic configuration. The display is rotatable by 180° and replaceable. Multicolour LEDs (green/yellow/red) indicate the switching status and thresholds for each output socket. An integrated electromagnetic buzzer enables acoustic alarm. Measurement accuracy is ±1 % (kWh) according to EN 62053-21. The PDU measures voltage, current, frequency, active power, active energy, apparent power, apparent energy, power factor (cosPhi), phase angle, and neutral conductor current. Additionally, unbalanced load detection is performed. Fuse monitoring is available for PDUs with integrated fuses.

Technology Explained Simply

The PDU is equipped with a powerful CPU (ARM Cortex A8) and features an integrated, fully redundant power supply that can be powered from all phases. The power supply is fault-tolerant and redundant across all phases. The relays are bistable, enabling low power consumption and high switching capacity even at high inrush currents (up to max. 300 A). The relay switching states are stored even during power failure. The PDU supports programmable power-on behaviour after voltage recovery (on/off/last status) as well as programmable switching behaviour (time/programmable logic). The integrated real-time clock with battery backup (max. 10 years, replaceable) ensures time accuracy.

Compatibility and Accessories

The PDU is equipped with a variety of interfaces: USB 2.0 (USB-A) for mass configuration, firmware update, and data logging; CAN-Bus interface (RJ45) for up to 16 environmental sensors (CMC III); serial interface RS232 (RJ12) for LTE unit, scripting, and CLI. The fully redundant Ethernet interface (10/100/1000 Mbit/s) enables network integration. Supported protocols include Web server (HTTP, HTTPS, SSL), SSH, Telnet, NTP, TCP/IP v4 & v6, DHCP, DNS, SNMP v1, v2c & v3, Modbus/TCP, OPC-UA, MIB for integration into 3rd party DCIM software, and FTP/SFTP for updates and file transfers. The PDU supports connection to LDAP(S), Radius, Active Directory, and Syslog servers (max. 2 servers). Email alerts on alarm (SMTP) are possible. User management includes rights management. The PDU can be optionally expanded with surge protection modules Type 3 (with replaceable diverters during operation and status monitoring) and differential current measurement (Type B) per input/phase/fuse. CMC III CAN-Bus sensors can be connected to monitor environmental conditions. The PDU is designed for integration into Rittal VX IT enclosures.

Mounting and Installation

Mounting is toolless in the Zero-U-Space of Rittal VX IT or TS IT racks. The delivery includes mounting hardware. The supply cable has a length of 3 m. The PDU is designed for use in racks with a minimum width of 1,200 mm (cabinet frame) or 1,800 mm (48,3 cm ( 19 inch ) profile rails). Dimensions are 44 mm (width) × 1,095 mm (length) × 70 mm (depth).

Operational Advantages

The PDU offers high operational reliability through redundant power supply and fault-tolerant architecture. Energy measurement per output socket enables precise load distribution and monitoring. Programmable switching functions and groupings support load control. The integrated real-time clock and storage of relay states ensure reliable recovery after power failure. Support for PoE (Power over Ethernet) enables emergency power supply for the web server. The PDU is designed for use in environments with an operating temperature of 5 °C to 50 °C and relative humidity of 10 % to 95 % (non-condensing). Storage temperature is -20 °C to 70 °C. The unit complies with the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU, as well as standards EN 62368-1, EN 61000-3, EN 61000-4, EN 61000-6, and EN 62053-21.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/593565
qrcode für Rittal 7979411 PDU managed 16 A 230 V