| General |
| Model | PDU, switched |
| Material | Aluminium profile, black anodised, mounting slots: plastic |
| Scope of delivery | Including mounting hardware |
| Width | 44 mm |
| Depth | 70 mm |
| Length | 1.495 mm |
| Number of sockets and type | 24 x C13 / 6 x C19 |
| Socket outlets | 24 x C 13, 6 x C 19 |
| Rated operating voltage | 400 V (AC) |
| Rated current (max.) | 16 A |
| Nominal power | 11 kW |
| Power supplies | Phases per input: 3~ |
| Connection cable length | 3 m |
| Electrical connection type | CEE |
| Interfaces | USB 2.0 port (USB-A) for mass configuration, firmware update & data logging, CAN-Bus interface (RJ45) for max. 16 environment sensors, serial interface RS232 (RJ12) for LTE unit, scripting, CLI, use of own certificates/TLS 1.2, email sending on alarm (SMTP), user management including rights management, LDAP(S)/Radius/Active Directory integration, Syslog server integration (max. 2 servers), fully redundant Ethernet interface 10/100/1000 Mbit/s |
| Policies | EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU |
| Standards | EN 62368-1, EN 61000-3, EN 61000-4, EN 61000-6, EN 62053-21 |
| Protocols | Web server (HTTP, HTTPS, SSL) SSH, Telnet, NTP, TCP/IP v4 & v6, DHCP, DNS, SNMP v1, v2c & v3, Modbus/TCP, OPC-UA, MIB for integration into 3rd party DCIM software, FTP/SFTP (update/file transfer) |
| Operating temperature range | 5 °C...50 °C |
| Humidity (non-condensing) | 10...95 % |
| Storage temperature range | -20 °C...70 °C |
| Suitable for | Housing type: VX IT cabinet frame: ≥ 1,800 mm, housing type: VX IT 19"-profile rails: ≥ 1,800 mm |
The Rittal DK 7979336 is a
switched PDU (Power Distribution Unit) for use in IT network and server racks. It serves intelligent power distribution and monitoring in 19-inch systems and enables individual control and measurement of connected devices. The unit is housed in a compact aluminium profile with a black anodised surface and provides a total power of 11 kW at a rated operating voltage of 400 V (AC) and a nominal current of 16 A. Power supply is via a 3-phase input with CEE connector and a supply cable of 3 m length.
Applications
This PDU is specifically designed for use in Rittal VX IT and TS IT racks, where installation in the Zero-U-Space can be done tool-free. It is suitable for IT infrastructures requiring precise energy measurement, load distribution, and remote control. Integrated energy measurement is performed per phase and complies with standard EN 62053-21 with a measurement accuracy of ±1 % (kWh). The phase colour coding (L1=pink, L2=black, L3=white) simplifies assignment and maintenance.
Functions and Equipment in Detail
The PDU features 24 C13 outlets and 6 C19 outlets, each individually switchable. The switching function is implemented using bistable relays, which ensure low power consumption and high switching capacity even at high inrush currents (up to max. 300 A). Relay states are retained even during power failure. The PDU offers programmable switching behaviour, such as sequential power-on after voltage restoration, to avoid overloading peaks. The power-on behaviour after voltage restoration can be programmed to on", "off", or "last status.
Technology Explained Simply
The PDU is equipped with an integrated, fully redundant power supply unit fed from all phases, ensuring fault-tolerant power supply. The display/controller unit is rotatable 180° within the housing and is replaceable. The bright TFT display (128x128 pixels, RGB) with backlighting shows power data and basic configuration. Multicoloured LEDs (green/yellow/red) indicate switching states and warning or alarm thresholds per phase. An integrated electromagnetic buzzer enables acoustic alarm. The real-time clock is equipped with battery backup (max. 10 years, replaceable).
Compatibility and Accessories
The PDU supports a wide range of protocols, including Web server (HTTP, HTTPS, SSL), SSH, Telnet, NTP, TCP/IP v4 & v6, DHCP, DNS, SNMP v1, v2c & v3, Modbus/TCP, OPC-UA, and FTP/SFTP. Interfaces include a USB 2.0 port (USB-A) for mass configuration, firmware update, and data logging, a CAN-Bus interface (RJ45) for up to 16 environmental sensors (CMC III), and a serial interface RS232 (RJ12) for LTE unit, scripting, CLI, and TLS 1.2. Integrated features include email alerts on alarm (SMTP), user management with rights management, LDAP(S)/Radius/Active Directory integration, and Syslog server connection (up to 2 servers). The fully redundant Ethernet interface (10/100/1000 Mbit/s) enables integration into DCIM software. Optional CMC III CAN-Bus sensors can be connected to monitor environmental data such as temperature or humidity.
Mounting and Installation
Installation is tool-free in the Zero-U-Space of Rittal VX IT or TS IT racks. The delivery includes mounting hardware. The PDU is self-powered and does not require external power supply. Dimensions are 44 mm (width) × 1,495 mm (length) × 70 mm (depth). Operating temperature ranges from 5 °C to 50 °C, and relative humidity (non-condensing) from 10 % to 95 %. Storage temperature is -20 °C to 70 °C.
Operational Advantages
The PDU enables precise energy measurement, load distribution, and remote control. The integrated real-time clock, battery backup, and retention of relay states ensure reliable operation even during power failures. Support for protocols such as SNMP, Modbus/TCP, and OPC-UA facilitates integration into existing monitoring and management systems. The ability to set thresholds for voltage, current, and power, along with operating hour counters (total and cyclic, resettable), supports maintenance and optimisation of IT infrastructure. The PDU is suitable for enclosure types VX IT with cabinet frame ≥ 1,800 mm or 19-inch profile rails ≥ 1,800 mm.
The PDU is certified according to standards EN 62368-1, EN 61000-3, EN 61000-4, EN 61000-6, and EN 62053-21, as well as directives EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU. Measurement functions include voltage, current, frequency, active power, active energy, apparent power, apparent energy, power factor (cosPhi), phase angle, neutral conductor current measurement, and unbalanced load detection. For PDUs with integrated fuses, fuse monitoring is provided. The PDU is designed for IT infrastructures requiring high reliability, transparency, and controllability of power supply.