| General |
| Model | PDU, switched |
| Material | Aluminium profile, black anodised, mounting slots: plastic |
| Scope of delivery | Including mounting hardware |
| Options | Overvoltage protection Type 3 with replaceable diverters during operation, with status monitoring, integrable in PDU housing, differential current measurement (Type B) per input/phase/fuse, monitoring of optional overvoltage protection, CMC III CAN-Bus sensors for environment monitoring connectable, max. 16 sensors, other housing colours available |
| Width | 44 mm |
| Depth | 70 mm |
| Length | 1.495 mm |
| Number of sockets and type | 12 x C13 / 12x Combi (C13/C19) |
| Rated operating voltage | 230 V AC |
| Rated current (max.) | 32 A |
| Nominal power | 7,4 kW |
| Power supplies | Number: 1, Phases per input: 1~ |
| Connection cable length | 3 m |
| Electrical connection type | CEE |
| Interfaces | USB 2.0 port (USB-A) for mass configuration, firmware update & data logging, CAN-Bus interface (RJ45) for max. 16 environment sensors, serial interface RS232 (RJ12) for LTE unit, scripting, CLI, use of own certificates/TLS 1.2, email sending on alarm (SMTP), user management including rights management, LDAP(S)/Radius/Active Directory integration, Syslog server integration (max. 2 servers), fully redundant Ethernet interface 10/100/1000 Mbit/s |
| Policies | EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU |
| Standards | EN 62368-1, EN 61000-3, EN 61000-4, EN 61000-6, EN 62053-21 |
| Protocols | Web server (HTTP, HTTPS, SSL) SSH, Telnet, NTP, TCP/IP v4 & v6, DHCP, DNS, SNMP v1, v2c & v3, Modbus/TCP, OPC-UA, MIB for integration into 3rd party DCIM software, FTP/SFTP (update/file transfer) |
| Operating temperature range | 5 °C...50 °C |
| Humidity (non-condensing) | 10...95 % |
| Storage temperature range | -20 °C...70 °C |
| Suitable for | Housing type: VX IT cabinet frame: ≥ 1,800 mm, housing type: VX IT 19"-profile rails: ≥ 1,800 mm |
Rittal DK 7979321 is a
switched PDU (Power Distribution Unit) for use in IT network and server racks. It enables intelligent power distribution and monitoring in 19-inch systems and allows individual control and measurement of individual output sockets. The device is housed in a compact aluminium profile with a black anodised surface and features an integrated control and display unit with TFT display. The PDU is designed for a rated operating voltage of 230 V AC and supports a maximum rated current of 32 A, corresponding to a rated power of 7.4 kW. Power supply is via a CEE connection cable with a length of 3 m.
Applications
The PDU is specifically designed for use in Rittal VX IT and TS IT racks, particularly in cabinet frames or 48,3 cm ( 19 inch ) profile rails with a minimum length of 1,800 mm. When mounted vertically, it can be installed toollessly in Zero-U-Space, saving rack space. The colour-coded phase marking (L1=pink, L2=black, L3=white) facilitates assignment and maintenance. The PDU is intended for use in IT infrastructures where precise energy measurement, load monitoring and remote control are required.
Functions and Equipment in Detail
The PDU features 12 C13 sockets and 12 Combi sockets (C13/C19), each individually switchable via an integrated control unit. The switching function is performed by bistable relays, enabling low power consumption and high switching capacity even at high inrush currents up to 300 A. The relay states are retained even during power failure. The PDU offers programmable switching logic, including sequential switching on after power restoration, to avoid overloads. The switching behaviour after power restoration can be programmed to on", "off", or "last status.
Technology Explained Simply
The integrated energy measurement is performed per phase and records voltage, current, frequency, active power, active energy, apparent power, apparent energy, power factor (cosPhi), phase angle, and neutral conductor current. Measurement accuracy is ±1 % (kWh) according to EN 62053-21. The PDU includes an integrated real-time clock with battery backup (up to 10 years, replaceable) and an integrated electromagnetic buzzer for acoustic alarm. Adjustable thresholds for voltage, current and power enable warnings and alarms in case of exceedances. An operating hour counter (total and cyclic, resettable) supports operational monitoring.
Compatibility and Accessories
The PDU is equipped with a fully redundant Ethernet interface (10/100/1000 Mbit/s), suitable for integration into DCIM software and network monitoring systems. It supports protocols such as HTTP/HTTPS, SSH, Telnet, NTP, TCP/IP v4 & v6, DHCP, DNS, SNMP v1, v2c & v3, Modbus/TCP, OPC-UA, FTP/SFTP. The CAN-Bus interface (RJ45) allows connection of up to 16 CMC III environmental sensors for monitoring temperature, humidity or other parameters. Optionally, a Type 3 surge protection device with replaceable discharge elements during operation can be integrated, with its status monitored. Differential current measurement (Type B) per input/phase/fuse is also possible.
Mounting and Installation
Mounting is toolless in the Zero-U-Space of Rittal VX IT or TS IT racks. The device is supplied with mounting hardware intended for rack installation. The display unit is rotatable by 180° and replaceable to ensure optimal visibility. The PDU is self-powered, requiring no external power supply. The integrated power supply is fault-tolerant and redundantly designed across all phases.
Operational Advantages
The PDU offers high operational reliability through redundant power supply and integrated alarm functions. Remote control via network and serial interfaces enables central monitoring and control. Support for LDAP(S), Radius, Active Directory and Syslog servers (up to 2 servers) allows integration into existing IT infrastructures. The use of own certificates and TLS 1.2 ensures secure communication. The PDU is designed for operating temperatures from 5 °C to 50 °C and humidity levels from 10 % to 95 % (non-condensing). The storage temperature range is -20 °C to 70 °C. The PDU is certified according to EN 62368-1, EN 61000-3, EN 61000-4, EN 61000-6 and EN 62053-21, as well as the EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU.
Scope of Delivery
Includes mounting hardware for installation in the rack.