Rittal 7979215, EAN: 4028177947689

Rittal 7979215 PDU Metered 16A/1P CEE 24xC13 4xC19

19 Inch-Technology > Accessories/Equipment > Energy Management

Rittal 7979215 PDU Metered 16A/1P CEE 24xC13 4xC19

Lieske Part No. 1910546
Mfg Part No 7979215
EAN-Code 4028177947689
Manufacturer Rittal
Here only 659,41 EUR
784,70 EUR incl. VAT

Further information for Rittal 7979215 PDU Metered 16A/1P CEE 24xC13 4xC19

General
ModelPDU, metered
MaterialAluminium profile, black anodised, mounting slots: plastic
Scope of deliveryIncluding mounting hardware
OptionsOvervoltage protection Type 3 with replaceable diverters during operation, with status monitoring, integrable in PDU housing, differential current measurement (Type B) per input/phase/fuse, monitoring of optional overvoltage protection, CMC III CAN-Bus sensors for environment monitoring connectable, max. 16 sensors, other housing colours available
Description of measurement functionsmeasurement per phase or input, powerful CPU (ARM Cortex A8), digital input (potential-free contact), additional alarm output/relay output (changeover contact)
Width44 mm
Depth70 mm
Length1.295 mm
Number of sockets and type24 x C13 / 4 x C19
Rated operating voltage230 V (AC)
Rated current (max.)16 A
Nominal power3,7 kW
Power suppliesNumber: 1, Phases per input: 1~
Connection cable length3 m
Electrical connection typeCEE
InterfacesUSB 2.0 port (USB-A) for mass configuration, firmware update & data logging, CAN-Bus interface (RJ45) for max. 16 environment sensors, serial interface RS232 (RJ12) for LTE unit, scripting, CLI, use of own certificates/TLS 1.2, email sending on alarm (SMTP), user management including rights management, LDAP(S)/Radius/Active Directory integration, Syslog server integration (max. 2 servers), fully redundant Ethernet interface 10/100/1000 Mbit/s
PoliciesEMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU
StandardsEN 62368-1, EN 61000-3, EN 61000-4, EN 61000-6, EN 62053-21
ProtocolsWeb server (HTTP, HTTPS, SSL) SSH, Telnet, NTP, TCP/IP v4 & v6, DHCP, DNS, SNMP v1, v2c & v3, Modbus/TCP, OPC-UA, MIB for integration into 3rd party DCIM software, FTP/SFTP (update/file transfer)
Operating temperature range5 °C...50 °C
Humidity (non-condensing)10...95 %
Storage temperature range-20 °C...70 °C
Suitable forHousing type: VX IT cabinet frame: ≥ 1,800 mm, housing type: VX IT 19"-profile rails: ≥ 1,800 mm
The Rittal DK 7979215 is a PDU (Power Distribution Unit) with integrated energy measurement per phase, specifically designed for use in IT network and server racks. As a metered PDU, it enables precise monitoring of power consumption, power, and operating hours, allowing for efficient energy management and load monitoring in data centers and IT infrastructures. The device features a compact design with dimensions of 44 mm (width) × 1,295 mm (length) × 70 mm (depth) and is intended for vertical mounting in the Zero-U-Space of Rittal VX IT or TS IT racks, with tool-free installation. Power supply is via a CEE power cord with 3 m length, connected to a 230 V (AC) input. The maximum rated power is 3.7 kW at a rated current of 16 A.

Applications

The PDU is designed for use in IT infrastructures, particularly in server racks, network, and data processing environments. It is suitable for power distribution and monitoring in racks with a minimum length of 1,800 mm, both in VX IT enclosure frames and VX IT 48,3 cm ( 19 inch ) profile rails. The integrated energy measurement per phase enables accurate monitoring of power consumption for individual IT systems or entire rack loads, which is relevant for energy efficiency analysis, load management, and data center infrastructure management (DCIM). The color coding of phases (L1=pink, L2=black, L3=white) supports phase assignment and error prevention during installation.

Functions and Equipment in Detail

The DK 7979215 features 24 C13 outlets and 4 C19 outlets, made of plastic and arranged on an aluminum profile with a black anodized finish. Measurement functions include voltage, current, frequency, active power, active energy, apparent power, apparent energy, power factor (cosPhi), phase angle, and neutral conductor current measurement for unbalanced load detection. Measurement accuracy is ±1 % (kWh) according to standard EN 62053-21. A bright TFT display with 128x128 pixels (RGB) and backlighting shows power data and basic configuration. The display is rotatable by 180° and replaceable, ensuring optimal readability during vertical mounting. An integrated electromagnetic buzzer provides acoustic alarm for exceeding set thresholds for voltage, current, or power. Operating hour counters are resettable both globally and cyclically.

Technology Explained Simply

The PDU is equipped with a powerful CPU (ARM Cortex A8) ensuring data processing and communication. Power supply is via an integrated, fully redundant power supply unit, which can be powered from all phases, ensuring fault-tolerant and reliable operation. The PDU is self-powered and does not require external power supply. The integrated real-time clock is buffered by a replaceable battery with a lifespan of up to 10 years, ensuring time accuracy even during power failure. Measurement is performed per phase or per input, enabling detailed load analysis.

Compatibility and Accessories

The PDU is equipped with a variety of interfaces enabling flexible integration into existing IT infrastructures. These include a fully redundant Ethernet interface (10/100/1000 Mbit/s), a CAN-Bus interface (RJ45) for connecting up to 16 CMC III environmental sensors, an RS232 interface (RJ12) for LTE modules, scripting, and CLI, as well as a USB 2.0 port (USB-A) for mass configuration, firmware updates, and data logging. Communication occurs via protocols such as HTTP/HTTPS, SSH, Telnet, SNMP v1/v2c/v3, Modbus/TCP, OPC-UA, FTP/SFTP, NTP, TCP/IP v4 & v6, DHCP, DNS, and MIB, enabling integration into DCIM software and other monitoring systems. Additionally, the PDU supports connection to LDAP(S), Radius, Active Directory, and Syslog servers (up to 2 servers). Optionally, a Type 3 surge protection device with replaceable discharge elements during operation can be integrated, with status monitoring. Differential current measurement (Type B) per input/phase/fuse is also possible. The PDU includes a digital input (potential-free contact) and an additional relay output (changeover contact) to process external signals and trigger alarms.

Mounting and Installation

Mounting is tool-free in the Zero-U-Space of Rittal VX IT or TS IT racks. The delivery includes necessary mounting hardware. Vertical mounting enables optimal space utilization in the rack. The 3 m long power cord allows flexible positioning of the input. The PDU is designed for an operating temperature of 5 °C to 50 °C and humidity of 10 % to 95 % (non-condensing). Storage temperature is -20 °C to 70 °C.

Operational Advantages

The DK 7979215 offers high operational reliability through redundant power supply and integrated alarm functions. Precise energy measurement enables detailed load analysis and optimization of energy consumption. Support for various protocols and interfaces simplifies integration into existing IT monitoring systems. Tool-free mounting and compact design reduce installation time. The integrated real-time clock with battery backup ensures continuous time measurement even during power failure. The PDU is compliant with IT infrastructure standards EN 62368-1, EN 61000-3, EN 61000-4, EN 61000-6, as well as the EMC Directive 2014/30/EU and the Low Voltage Directive 2014/35/EU.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1910546
qrcode für Rittal 7979215 PDU Metered 16A/1P CEE 24xC13 4xC19