| General |
| Model | 2nd generation, with sight door, with side walls, with roof sheet |
| Material | Enclosure: sheet steel, door: sheet steel, 1.2 mm, side wall: sheet steel, 1.2 mm, 19“-profile rails: sheet steel, 2 mm, side wall: sheet steel, 1.2 mm |
| Surface protection | Cabinet frame: dip-primed, flat parts: dip-primed, powder-coated |
| Basic colour | RAL 7035 |
| Colour | RAL 7035 |
| Scope of delivery | Cabinet with front vision door and rear door, side walls, bolted roof sheet with double-sided concealed cable entry along the entire cabinet depth, and central concealed opening for easy integration of a fan module. |
| Width | 800 mm |
| Height | 2.000 mm |
| Depth | 800 mm |
| Height units | 42 HE |
| Layer spacing (as delivered) | 445 mm |
| Door configuration rear | Sheet steel door, single-piece closed |
| Front door configuration | Vision door, single-piece, with single-pane safety glass 3 mm, door opening angle in rowing max. 105° |
| Load capacity | 5000 N |
| Load capacity (static) | 500 kg |
| Degree of protection IP according to EN 60 529 | IP 20 |
| Note | For installation of a fan module, brush strips are required for equipping the cable passage openings, if these are used or the cover plates have been removed. Brush strips for covering the cable entry are available separately and can be conveniently ordered through our accessory range. |
| Base material | steel sheet |
The Rittal network cabinet TX 7888828 is an IT rack of the 2nd generation, designed for housing network and IT components in confined spaces, low ceiling heights, or hard-to-reach areas. The enclosure features a front viewing door with single-pane safety glass (3 mm) and a single-piece, solid steel door at the rear. The side panels are screwed, enabling quick access to the interior. The roof plate is also screwed and provides a double-sided, concealed cable entry across the entire cabinet depth, as well as a central, concealed opening for integrating a fan module. Dimensions are 800 mm width, 2000 mm height, and 800 mm depth, corresponding to a mounting height of 42 HE. The mounting pitch is 445 mm in the delivered state.
Applications
This cabinet is suitable for use in smaller IT network infrastructures where space optimization and individual interior configuration are prioritized. Its compact design without excessive width or depth allows for efficient use of available space. The construction is particularly advantageous when only small electrical components are installed, as no mounting units remain unused.
Functions and Equipment in Detail
The enclosure is made of steel sheet, with the door and side panels having a sheet thickness of 1.2 mm. The 19“ profile rails are made of 2 mm thick steel sheet. The cabinet frame surface is dip-primed, while flat parts are dip-primed and powder-coated in RAL 7035. The front and rear 19“ profile rails are adjustable both in depth and width, enabling individual, even asymmetric, interior configuration. The frame profiles feature an integrated system hole pattern with a 25 mm hole spacing, allowing easy component mounting.
Technology Explained Simply
The screwed side panels and roof plate allow quick access to the interior without tools. The double-sided, concealed cable entry in the roof plate ensures orderly cabling and minimizes visible cables inside the cabinet. The static load capacity is 500 kg, and the operational load capacity is 5000 N.
Compatibility and Accessories
The cabinet is compatible with a comprehensive accessory program, including slide rails, routing panels, cable ladders, levelling feet, component shelves, and cable ducts. These components enable individual interior outfitting and adaptation to specific requirements.
Mounting and Installation
Mounting is achieved via a torsion-resistant, welded frame structure made of rolled and 16-fold flanged vertical profiles, connected with a horizontal frame at the bottom and horizontal cross profiles. The cabinets can be bayed front, rear, and side. The door opening angle during baying is maximum 105°. The base frame is open, without base plates, and can optionally be equipped with base modules from the accessory program.
Operational Advantages
The cabinet offers optimal space utilization through its compact design and flexible interior outfitting. The adjustable 19“ profile rails and comprehensive accessory program allow individual adaptation to various requirements. The screwed side panels and roof plate facilitate access and maintenance. The protection rating IP 20 ensures protection against finger contact and against solid foreign objects, but not against splashing water or dust. The surface coating of dip-primed and powder-coated steel sheet provides high corrosion resistance and visual quality.
Protection Rating and Material
The protection rating IP 20 according to EN 60 529 protects against finger contact and against entry of solid foreign objects with a diameter of at least 12.5 mm. The enclosure is made of steel sheet, with the door and side panels having a sheet thickness of 1.2 mm and the 19“ profile rails 2 mm. The surface is dip-primed and powder-coated in RAL 7035.
Accessories and Expansion Options
Compatible accessories include VX plinth corner pieces, routing panels, slide rails, levelling feet, component shelves, cable ladders, cable ducts, brush kit for TX CableNet, and blank panels. These components enable flexible and individual cabinet outfitting.
Scope of Delivery
The scope of delivery includes the enclosure with front viewing door and rear solid door, side panels, and a screwed roof plate with double-sided, concealed cable entry across the entire cabinet depth and a central, concealed opening for integrating a fan module. The 19“ profile rails are already integrated into the enclosure.