Rittal 7888728, EAN: 4028177997554

Rittal 7888728 TX 7888728 network cabinet 42 HE disassemblable

Rittal 7888728 TX 7888728 network cabinet 42 HE disassemblable

Lieske Part No. 877406
Mfg Part No 7888728
EAN-Code 4028177997554
Manufacturer Rittal
Here only 756,39 EUR
900,10 EUR incl. VAT

Further information for Rittal 7888728 TX 7888728 network cabinet 42 HE disassemblable

General
Model2nd generation, disassemblable, with vision door, with side walls, with roof sheet
MaterialEnclosure: sheet steel, door: sheet steel, 1.2 mm, side wall: sheet steel, 1.2 mm, 19“-profile rails: sheet steel, 2 mm, side wall: sheet steel, 1.2 mm
Surface protectionCabinet frame: dip-primed, flat parts: dip-primed, powder-coated
Basic colourRAL 7035
ColourRAL 7035
Scope of deliveryCabinet with front vision door and rear door, cabinet frame, disassembled, with 19"-profile rails front and rear, side walls, bolted roof sheet with concealed, rear cable entry in transverse direction and central, concealed opening for easy integration of a fan module.
Width800 mm
Height2.000 mm
Depth800 mm
Height units42 HE
Layer spacing (as delivered)445 mm
19" mountingdisassemblable
Door configuration rearSheet steel door, single-piece closed
Front door configurationVision door, single-piece, with single-pane safety glass 3 mm, door opening angle in rowing max. 105°
Load capacity5000 N
Load capacity (static)500 kg
Degree of protection IP according to EN 60 529IP 20
NoteFor installation of a fan module, brush strips are required for equipping the cable passage openings, if these are used or the cover plates have been removed. Brush strips for covering the cable entry are available separately and can be conveniently ordered through our accessory range.
Base materialsteel sheet
The Rittal TX 7888728 is a network enclosure of the TX CableNet series, designed for use in IT infrastructures with limited space, low ceiling heights, or in hard-to-reach rooms. The enclosure is available in the 2nd generation, designed as a disassembled unit and offers an optimal solution for individual expansion scenarios, particularly for housing small electrical components, where no unnecessary height units are lost. Dimensions are 800 mm width, 2000 mm height, and 800 mm depth, corresponding to an expansion height of 42 HE. The spacing between levels in the delivered state is 445 mm.

Applications
This enclosure is suitable for use in smaller IT network structures where compact and flexible mounting is required. The disassembled construction enables easy handling during transport and installation, especially in rooms with restricted access. The integrated 48,3 cm ( 19 inch ) profile rails are adjustable in width and depth and support an asymmetric internal layout, facilitating adaptation to different device geometries.

Functions and Equipment in Detail
The enclosure is made of steel sheet, with the door and side panels having a thickness of 1.2 mm. The 48,3 cm ( 19 inch ) profile rails are made of 2 mm thick steel sheet. The surface of the enclosure frame is dip-primed, and flat parts are dip-primed and powder-coated. The base color is RAL 7035. The front door is a viewing door, single-piece design, with single-pane safety glass (3 mm thickness), enabling visual inspection of installed components. The rear door is a single-piece, solid steel sheet door. The door opening angle during baying is up to 105°.

Technology Explained Simply
The construction of the enclosure is based on a torsion-resistant, welded frame structure made of rolled and 16-fold flanged vertical profiles, connected to a horizontal frame at the bottom and horizontal cross profiles. The frame profiles feature an integrated system hole pattern on a 25 mm grid, enabling convenient internal installation through simple hanging and securing of components. The vertical profiles each have two mounting levels offset in depth and width, which can be used flexibly. The screwed roof plate provides a double-sided concealed cable entry across the full enclosure depth, as well as a central concealed opening for easy integration of a fan module. The load capacity is 5000 N, and the static load capacity is 500 kg. The protection rating according to EN 60 529 is IP 20, providing protection against solid foreign objects and splashing water to a limited extent.

Compatibility and Accessories
Various accessories are available for individual internal fitting, including slide rails, levelling feet, component shelves, plinth trim panels, brush kit for TX CableNet, and transport kit. The baying of enclosures is possible front and rear, as well as side-to-side.

Mounting and Installation
Mounting is performed via the disassembled enclosure frame, equipped with 48,3 cm ( 19 inch ) profile rails at the front and rear. The side panels are screwed, allowing quick access. The screwed construction of the roof plate and the integrated system hole pattern facilitate installation and adaptation. The profiles are rounded, making handling and installation safer.

Advantages in Operation
The enclosure offers efficient use of available space due to its compact design and the possibility of individual adaptation of internal equipment. The disassembled construction and adjustable profile rails increase flexibility during mounting and maintenance. The integrated cable entry and opening for fan modules support structured and maintenance-friendly installation. The static load capacity of 500 kg and load capacity of 5000 N ensure safe use even with heavy loads.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/877406
qrcode für Rittal 7888728 TX 7888728 network cabinet 42 HE disassemblable