Rittal 7859410, EAN: 4028177801844

Rittal 7859410 DK 7859410 PSM measurement module CAN-Bus 8x C13 switchable

Cables > Data lines > Cat6 Patch Cable

Rittal 7859410 DK 7859410 PSM measurement module CAN-Bus 8x C13 switchable

Lieske Part No. 147694
Mfg Part No 7859410
EAN-Code 4028177801844
Manufacturer Rittal
Here only 625,49 EUR
744,33 EUR incl. VAT

Further information for Rittal 7859410 DK 7859410 PSM measurement module CAN-Bus 8x C13 switchable

General
MaterialSocket inserts: Plastic (PA6 GF 30 V1), Profile: Aluminium, anodised
Scope of deliveryPSM measurement modules with CAN-Bus, CAN-Bus connection cable, 1 m
Distribution power per module3.680 W
Switching power per relay4.000 VA
Length500 mm
Pollution degree2
Interface bus system2 x CAN-Bus interface to CMC III (max. 16 at PU/4 at PU Compact), 2 x RJ45 (connection to CMC)
Number1
Relay versionDouble coil, bistable
Rated operating voltage18 V (DC) - 24 V (DC), power supply via CMC III system
Input voltage230 V AC
Input voltage tolerance± 10 %
Nominal current16 A
Required module slots (number)2
Number of participants PU compact (max.)4
Number of participants PU (max.)16
PoliciesLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU
Degree of protection IP according to IEC 60 529IP 20
MonitoringAlarm management via CMC III (e.g. email or SMS), visualisation of switching status on CMC III website and RiZone, up to 16 PSM modules on one CMC III PU (per IP address), rights management via CMC III (e.g. restriction of switching functionality)
StandardsEN 50 600-2-2, EN 60950
Description of measurement functionsVoltage V, current A, frequency Hz, active power kW, active energy kWh, reactive power kVar, reactive energy kVarh, apparent power kVA, apparent energy kVAh, power factor cosPhi, crest factor (peak factor), operating hour counter d, h, min, measurement accuracy of ± 1 %, measurement functions resettable/reset via software/interval measurement: active energy kWh, operating hour counter h, thresholds (voltage, current, power) freely configurable
ProtocolsNetwork functionality (only in combination with CMC III system): IPv4, IPv6, SNMPv3, Modbus/TCP, OPC-UA
Width53 mm
Depth45 mm
Maximum operating altitude above sea level2.000 m
Operating temperature range5 °C...60 °C
Humidity (non-condensing)90 %
Socket outlets8 x C13
Relative humidity (non-condensing)10 %
Storage temperature range-20 °C...70 °C
PCF/VE (Cradle-to-Gate)3.8 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal DK 7859410 is a PSM metering module with integrated switching functionality, specifically designed for modular power distribution in server and IT infrastructures. It extends existing PSM power rails with the capability for energy measurement and individual control of output sockets. The module is suitable for use in data centres, data processing facilities, and industrial environments where precise monitoring and control of power distribution is required. It occupies two module slots in the power rail and provides eight outputs with IEC 60 320 C13 sockets. The input supply is 230 V AC with a tolerance of ±10 %, with a maximum distribution power per module of 3,680 W.

Applications

The module is ideal for applications requiring detailed energy consumption analysis and remote control of consumers. It is particularly suitable for retrofitting existing PSM installations to improve energy efficiency and optimise operating costs. Compatibility with the European PSM programme enables flexible integration into existing systems. Use in redundant systems is supported by the ability to switch power circuits by rotating the module. The operating temperature ranges from 5 °C to 60 °C, allowing application in standardised server rooms and industrial environments.

Functions and Equipment in Detail

The module features integrated energy measurement with an accuracy of ±1 %. Measured parameters include voltage (V), current (A), frequency (Hz), active power (kW), active energy (kWh), reactive power (kVar), reactive energy (kVarh), apparent power (kVA), apparent energy (kVAh), power factor (cosPhi), and crest factor. Additionally, an operating hour counter (in days, hours, minutes) is maintained. The measured values can be displayed locally on a backlit LC display, which turns red when current or power thresholds are exceeded. The thresholds for voltage, current, and active power are freely configurable. The switching function is performed by bistable double-coil relays with a switching capacity of 4,000 VA per relay. The outputs can be controlled individually or in groups via the CMC III system.

Technology Explained Simply

The module is powered via the CMC III system with a nominal operating voltage of 18 V to 24 V DC. Communication with the CMC III is via CAN-Bus, with two CAN-Bus interfaces and two RJ45 connectors available. Network functionality includes IPv4, IPv6, SNMPv3, Modbus/TCP, and OPC-UA, but only in conjunction with the CMC III system. Data transmission enables central visualisation of switching states on the CMC III website and in the RiZone platform. Alarms can be managed via email or SMS, and rights management allows restriction of switching functionality. A position sensor ensures that the display and web view are correctly shown in 90° increments.

Compatibility and Accessories

The module is compatible with the European PSM programme and can be integrated into existing PSM installations. It supports up to 16 PSM modules on a CMC III-PU (per IP address) and up to 4 on a PU Compact. Suitable accessories include the PDU Metered 16A/1P IEC-C20 6xC13 (48,3 cm ( 19 inch )), which provides additional power distribution with metering function. The use of universal socket locks enables securing of unused sockets.

Mounting and Installation

Mounting is simple and touch-protected via Plug & Play, even during operation. The module is easy to install and remove, enabling flexible use at different locations. Installation requires two module slots in the PSM power rail. The delivery includes the PSM metering module with CAN-Bus and a CAN-Bus connection cable with a length of 1 m.

Operational Advantages

The module facilitates compliance with requirements from ISO 50001 and EN 50600-2-2, which relate to energy efficiency and energy management. Local display and remote control enable efficient operational monitoring. High measurement accuracy and configurable thresholds support proactive fault detection and prevention. Integrated alarm management and rights management increase security and control over power distribution. The maximum operating altitude is 2,000 m above sea level, and the relative humidity (non-condensing) ranges from 10 % to 90 %. The protection rating IP 20 according to IEC 60 529 protects against finger contact and solid foreign objects, but not against water or dust. The operating temperature ranges from 5 °C to 60 °C, and the storage temperature from -20 °C to 70 °C.

Materials and Design

The socket inserts are made of plastic (PA6 GF 30 V1), and the profile is made of anodised aluminium. Dimensions are 500 mm length, 53 mm width, and 45 mm depth. The module is designed for indoor use and complies with the Low Voltage Directive 2014/35/EU and the EMC Directive 2014/30/EU. Standards EN 50 600-2-2 and EN 60950 are met. The pollution degree class is 2, indicating an environment with low pollution.

Monitoring and Control

Monitoring is performed via the CMC III system, which can manage alarms via email or SMS. Switching states are visualisable on the CMC III website and in the RiZone platform. Rights management enables fine-grained control of switching functions. The measurement functions are resettable and can be reset via software or at intervals (e.g. active energy kWh, operating hour counter h).
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/147694
qrcode für Rittal 7859410 DK 7859410 PSM measurement module CAN-Bus 8x C13 switchable