| General |
| Material | Sheet steel, 2 mm |
| Surface protection | Painted |
| Colour | Profile frame: RAL 7035, Insert: RAL 5018 |
| Scope of delivery | Torsion-stiff profile frame with 482.6 mm (19") mounting, mounting accessories |
| Installation dimensions | Installation width for components: 482.6 mm, installation width for components: 19" |
| Height units | 36 HE |
| PCF/VE (Cradle-to-Gate) | 48.2 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The product DK 7297000 from Rittal is a second mounting plane for Data Rack systems, designed for mounting 482.6 mm (48,3 cm ( 19 inch )) network components or for securing component shelves and slide rails. The product consists of a torsionally rigid profile frame made of 2 mm thick steel sheet and painted. The surface is finished in RAL 7035 (Grey), with the trim panel in RAL 5018 (Blue). The mounting plane is designed for an installation width of 482.6 mm (48,3 cm ( 19 inch )) and includes front-side perforation in a 482.6 mm (48,3 cm ( 19 inch )) grid. The hole center distances are 465 mm at the front and 470 mm at the rear, enabling the installation of patch panels and cable management rails. The mounting plane can be positioned in a 50 mm grid, with a minimum distance of 150 mm and a maximum of 350 mm between planes. The total height corresponds to 36 HE (height units), enabling integration into standard 19-inch frames.
Applications
The second mounting plane is used in Data Rack systems to provide additional mounting surfaces for network devices, patch panels, cable management rails, or component shelves. It is particularly suitable for applications where the standard mounting plane is insufficient to secure all required components. The torsionally rigid construction ensures stable mounting even for heavy or vibration-loaded devices. The integrated perforation enables flexible and precise mounting according to the 19-inch standard.
Functions and Equipment in Detail
The product features an integrated 482.6 mm (48,3 cm ( 19 inch )) perforation, optimized for mounting network components as well as for installing patch panels and cable management rails. The hole center distances are aligned with common mounting requirements, ensuring simple and secure installation. The mounting plane can be positioned in a 50 mm grid, allowing flexible adaptation to different device heights. The minimum distance of 150 mm and maximum of 350 mm between planes provides sufficient space for mounting various components without interference. Mounting accessories are included in the delivery scope and enable secure attachment to the flanged steel sheet plinth of the Data Rack frame.
Technology Explained Simply
The profile frame is made of 2 mm thick steel sheet and features a painted surface that resists corrosion and mechanical stress. The torsional rigidity ensures that the mounting plane maintains its shape even under load, preventing bending or shifting. The perforation in the 482.6 mm (48,3 cm ( 19 inch )) standard allows mounting of standard network components, while additional round and square holes in the 44.45 mm (HE grid) offer flexible mounting options. Positioning in a 50 mm grid provides flexibility in arranging devices within the rack.
Compatibility and Accessories
The second mounting plane is specifically designed for Data Rack systems and conforms to standard dimensions of 482.6 mm (48,3 cm ( 19 inch )) frames. It is mounted onto the flanged steel sheet plinth of the rack. Compatible accessories, such as depth braces for Data Rack, can be used additionally to enhance stability and mounting options. Compatibility with common 19-inch components is ensured by the standardized perforation.
Mounting and Installation
Installation is carried out using the mounting accessories included in the delivery scope. The mounting plane is attached to the flanged steel sheet plinth of the Data Rack frame. Positioning in a 50 mm grid allows flexible adaptation to specific requirements. Mounting is done using screws or bolts inserted into the pre-drilled holes. The installation is tool-assisted and requires no additional components.
Operational Advantages
The second mounting plane provides a stable and flexible mounting surface for additional components in the Data Rack. The torsionally rigid construction ensures high mechanical stability, even with heavy devices. The integrated perforation in the 19-inch standard enables simple and secure mounting of network components, patch panels, and cable management rails. The flexible positioning in a 50 mm grid offers adaptation options for different device heights and mounting requirements. The use of steel sheet with a painted surface ensures high corrosion resistance and long service life.