| General |
| Model | Middle part |
| Material | Housing: steel sheet 1.5 mm, console cover: steel sheet 2.0 mm, continuous foamed PU seal |
| Surface protection | Housing and cover: dip primed, externally powder coated, textured lacquer |
| Colour | RAL 7035 |
| Scope of delivery | Housing, rear cover hinged, 2 feet with automatic locking. Unlocking left automatic, right manual, opening for cable passage in housing base, closure: 3 mm double bar, housing, cover hinged at bottom, including cover holder, open base for individual cable entry |
| Width | 1.600 mm |
| Depth | 745 mm |
| Height front | 130 mm |
| Height at rear | 200 mm |
| IK code | IK10 |
| Note | To close the console center section, an end plate is required. For a 2-part console setup, a console base and an end plate for the console center section are required. For a 3-part console setup, a console base and a console top section are required. |
| Degree of protection IP according to IEC 60 529 | IP 55 |
| NEMA degree of protection | NEMA 1, NEMA 12 |
| Base material | steel sheet |
| Number of locks | 3 |
| Closure type | Pre-wiper |
| Closure insert | 3 mm double barb |
| Lock | Closure type: Deadbolt, Number of closures: 3, Closure insert: 3 mm double barb |
The Rittal CX 6713000 is a console middle section for the CX console system, designed for use in industrial and technical installations. It serves as a central component in a modular setup consisting of a console base section, a console middle section, and optionally a console top section. The width is 1,600 mm, the depth 745 mm, with the front side having a height of 130 mm and the rear side 200 mm. The enclosure is made of steel sheet with a wall thickness of 1.5 mm, and the console lid is made of 2.0 mm thick steel sheet. The surface is dip-primed and externally powder-coated with a textured lacquer in the colour RAL 7035. The continuously foamed PU sealing ensures a tight seal. The protection class IP 55 according to IEC 60 529 protects against dust and splashing water, enabling use in indoor environments as well as in slightly damp conditions. The protection classes NEMA 1 and NEMA 12 correspond to the respective American standards for protection against contact and contaminated environments. The IK code IK10 guarantees mechanical protection against impact with an energy of up to 10 joules, suitable for use in industrial environments.
Applications
This console middle section is designed for use in industrial control and operator console systems, particularly in installations requiring a modular division of the operator interface. It is suitable for applications in manufacturing industry, process automation, and technical control centres, where a clear separation between operator and control levels is required. The open base construction allows for individual cable entry, facilitating integration into existing cabling systems.
Functions and Equipment in Detail
The enclosure is supplied with a lid that is hinged at the rear and features two lifters with automatic locking. Unlocking is automatic on the left and manual on the right. The lid is hinged at the bottom and secured with a lid holder. The locking system consists of three latches with a 3 mm double-barrel lock insert, ensuring secure closure. The opening in the enclosure base serves for cable entry and enables flexible cabling.
Technology Explained Simply
The use of steel sheet with a wall thickness of 1.5 mm for the enclosure and 2.0 mm for the lid ensures high mechanical stability. The powder-coated surface in RAL 7035 provides a robust, abrasion-resistant, and corrosion-resistant coating. The IP protection class 55 protects against dust and splashing water, enabling use in indoor environments with increased humidity or occasional water spray. The IK10 rating protects against mechanical impacts such as shocks or impacts, which is important for use in industrial environments. The continuous PU sealing ensures a tight seal and prevents dust or moisture from entering.
Compatibility and Accessories
The console middle section is part of the modular CX console system and can be combined with a console base section and optionally a console top section. For a two-part setup, a console base section and an end plate for the console middle section are required. For a three-part setup, a console base and a console top section are necessary. Suitable accessories include drawers for keyboard and mouse, lock box covers, mounting brackets, pull-out keyboards with integrated trackball, multitools, system chassis, plastic and metal gland plates, and aluminium strips. These components allow individual adaptation of the operator console to specific requirements.
Mounting and Installation
Mounting is achieved by connecting the console middle section to a console base section, with the automatic lifters and hinged lids enabling easy mounting and maintenance. The open base construction allows for individual cable entry, facilitating integration into existing cabling systems. The locking system with three latches ensures secure closure of the enclosure.
Operational Advantages
The console middle section offers a robust and secure construction that meets the requirements of industrial environments. The modular design allows flexible adaptation to different requirements. The IP protection class 55 and IK code IK10 ensure a high protection standard. The open base construction and flexible locking system facilitate mounting and maintenance. The use of steel sheet and a powder-coated surface ensures long service life and high resistance to mechanical and chemical stresses.