| General |
| Model | Base unit |
| Material | Housing: steel sheet 1.5 mm, door: steel sheet, 2.0 mm, continuous foamed PU seal, mounting plate: steel sheet, 2.5 mm |
| Surface protection | Casing and door: dip primed, externally powder coated, textured lacquer, mounting plate: galvanized |
| Colour | RAL 7035 |
| Scope of delivery | Housing open at top, door or double door at front, with 3-point locking system, mounting plate, base plates, lock: 3 mm double bar |
| Width | 1.600 mm |
| Height | 675 mm |
| Depth | 400 mm |
| Mounting plate dimensions (W x H) | 1.520 mm x 625 mm |
| Number of doors | 2 |
| Door opening angle | 130° |
| IK code | IK10 |
| Note | To close the console base, an end plate is required. For a 2-part console assembly, a console center section and an end plate for the console center section are required. For a 3-part console assembly, a console center section and a console top section are required. |
| Degree of protection IP according to IEC 60 529 | IP 55 |
| NEMA degree of protection | NEMA 1, NEMA 12 |
| Base material | steel sheet |
| Number of locks | 1 |
| Closure type | 3-point locking system |
| Closure insert | 3 mm double barb |
| Lock | Closure type: 3-point locking system, number of closures: 1, closure insert: 3 mm double barb |
The Rittal CX 6703000 is a console base unit from the CX console system, designed as a base unit with dimensions width 1,600 mm, height 675 mm, and depth 400 mm. It serves as a foundation for modular console solutions in industrial and technical applications. The enclosure is made of sheet steel with a wall thickness of 1.5 mm, the door of sheet steel with 2.0 mm thickness and a continuously foamed PU seal, ensuring a tight closure. The mounting plate is made of 2.5 mm thick sheet steel. The surface of the enclosure and door is dip-primed and externally powder-coated with a textured lacquer, creating a robust and weather-resistant layer. The colour corresponds to RAL 7035, a grey-black tone commonly used in industrial environments. The mounting plate is galvanised, providing additional corrosion protection.
Applications
This console base unit is designed for use in industrial environments where high mechanical strength and protection against dust and splashing water are required. It is suitable as a base for control consoles, control systems, or enclosures in production plants, machine building, or process engineering. The open top allows for flexible integration with additional modules such as console middle or console top units, enabling the creation of modular, multi-part console systems. The protection rating IP 55 according to IEC 60 529 ensures protection against dust and splashing water from any direction, making it suitable for outdoor areas or damp indoor environments. The protection ratings NEMA 1 and NEMA 12 further enhance suitability for indoor and light industrial environments.
Functions and Equipment in Detail
The unit features a double door at the front, secured with a 3-point locking system. This system ensures an even and secure closure of the door at three points, achieving high mechanical stability. The lock insert is a 3 mm double bar, integrated into the locking system. The door can be opened up to an angle of 130°, providing good access to the interior. The delivery includes the enclosure (open at the top), the double door with locking system, the mounting plate, and two-part base plates, which facilitate easy cable routing. The base plates are included in the delivery to simplify the installation of cables and conduits.
Technology Explained Simply
The materials used – sheet steel with varying wall thicknesses – ensure high mechanical stability and durability. The PU seal on the door ensures a tight closure, supporting the IP 55 protection rating. The powder-coated surface provides additional corrosion protection and is suitable for use in harsh environments. The IK10 rating means the enclosure is protected against mechanical impacts such as shocks or vibrations up to a certain energy level, which is important for industrial applications. The mounting plate with dimensions 1,520 mm (W) x 625 mm (H) allows for secure mounting of devices or components inside the console.
Compatibility and Accessories
The console base unit is part of the modular CX console system and can be combined with additional components such as console middle or console top units to create multi-part console solutions. For a 2-part setup, a console middle unit and a closing plate for the middle unit are required. For a 3-part setup, a console middle unit and a console top unit are necessary. Compatible accessories include lock inserts made of zinc die-cast, VX profiles for cable entry, baying sets, earthing straps, plinth corner pieces with trim panels, mounting brackets, plinth trim panels, system chassis, cable strain relief rail, and comfort handles and circuit diagram pockets. These elements support integration into existing systems and allow individual adaptation to specific requirements.
Installation and Mounting
Mounting is done via the designated mounting plate, which has a galvanised surface. The two-part base plates facilitate the installation of cables and conduits. The open top of the enclosure allows for flexible integration with additional modules. The double door with the 3-point locking system ensures a secure and stable closure. The 130° door opening ensures good access to the interior. Mounting typically occurs on a suitable base, taking into account the dimensions of the enclosure and mounting plate.
Operational Advantages
The console base unit offers high mechanical strength and protection through the IP 55 and IK10 ratings. The modular design allows for flexible expansion and adaptation to different requirements. The integrated base plates and robust construction from sheet steel ensure a long service life and easy maintenance. The powder-coated surface is easy to clean and resistant to contamination. The use of standard components from the CX system ensures high compatibility with other modules and accessories.