| General |
| Model | Touch, resistive, USB |
| Material | Front frame: aluminium |
| Surface protection | Powder-coated |
| Colour | RAL 7035 |
| Scope of delivery | Sealing, hexagon nuts (for mounting on surfaces), VGA cable, M5 threaded bolts, for rear mounting, touch variants additionally with integrated cable and driver CD-ROM |
| Width | 430 mm |
| Height | 343 mm |
| Interfaces | VGA (D-SUB HD 15-pin), DVI-D |
| Operating temperature range | 0 °C...50 °C |
| Storage temperature range | -40 °C...85 °C |
| Display brightness | 400 cd/m² |
| Contrast ratio | 700 : 1 |
| Diagonal | 15" |
| Operating time | > 50.000 h |
| On Screen Display (OSD) | Control buttons at rear |
| Reading angle left/right | 80 ° |
| Display resolution | 1024 x 768 pixels |
| Note on part number | With VGA + DVI |
| Rated power Pel | At DC: 15 W |
| H-Sync. (min./max.) | 31.4 ‐ 80 kHz |
| V-Sync. (min./max.) | 60 ‐ 75 Hz |
| Number of colours | 16,2 |
| Controller resolution | VGA, SVGA, XGA |
The Rittal SM 6450070 is a
TFT monitor in built-in version, specifically designed for use in
command panel housings and
surface mounting. With a
diagonal of 15 inches and a resolution of
1024 x 768 pixels, it offers a clear display for industrial applications. The version as a
touchscreen with
resistive technology enables precise operation, while the
USB interface ensures the connection to the control computer. The dimensions are
430 mm width and 343 mm height, allowing compact integration into existing systems.
Applications
The monitor is designed for use in industrial environments where a robust and reliable operating interface is required. It is particularly suitable for machine controls, process visualizations, and operator panels in production facilities. The
built-in depth of 45 mm reduces space requirements within the enclosure and simplifies installation. The
operating temperature range of 0 °C to 50 °C and the
storage temperature range of -40 °C to 85 °C ensure functionality under various environmental conditions.
Functions and equipment in detail
The monitor features a
brightness of 400 cd/m² and a
contrast ratio of 700:1, ensuring good readability even in daylight. The
viewing angles left/right are 80 °, enabling flexible placement in the work area. The
on-screen display function is controlled via operating buttons on the rear, facilitating operation during use. The
rated power is 15 W under DC operation, ensuring efficient power supply. The
operating time exceeds 50,000 hours, highlighting the high service life and reliability of the device.
Technology explained simply
The
resistive touch technology works by pressure applied to the surface, detecting the position. This technology is particularly robust and suitable for environments with high mechanical loads. The
interfaces VGA (D-SUB HD 15-pin) and DVI-D enable connection to various graphics cards and control devices. The
controller resolution supports VGA, SVGA, and XGA, ensuring compatibility with different systems.
Compatibility and accessories
The monitor is equipped with
VGA and DVI-D, enabling broad compatibility with industrial and PC-based control systems. As accessories, a
mounting kit for Optipanel with M5 thread is offered, facilitating installation in specific enclosures. The delivery includes a
gasket, hex nuts for surface mounting, a VGA cable, M5 threaded bolts for rear mounting, and for touch variants, an
integrated connection cable and a driver CD-ROM.
Mounting and installation
The built-in version is intended for direct mounting in surfaces or command panel housings. The integrated
front frame made of aluminium, powder-coated in RAL 7035, ensures a robust and aesthetically pleasing appearance. The
hex nuts and M5 threaded bolts facilitate fastening. The
very low built-in depth of 45 mm reduces installation effort and space requirements within the enclosure. Additional ventilation is not required, as the device is designed for use in enclosed enclosures.
Advantages in operation
The monitor offers a
high-quality industrial version with reduced installation effort thanks to the integrated front frame. The
long operating time of over 50,000 hours and the
robust construction ensure high availability. The
touch function with USB interface enables intuitive operation, while the
VGA and DVI-D connections ensure flexible connection to various systems. The
powder-coated surface in RAL 7035 provides a protective and uniform finish, proven in industrial environments.