Rittal 5840600, EAN: 4028177959149

Rittal 5840600 Control Cabinet 1000x1800x400 mm

Industrial Material > Enclosures / Chassis > Switchboard-Systems

Rittal 5840600 Control Cabinet 1000x1800x400 mm

Lieske Part No. 1055464
Mfg Part No 5840600
EAN-Code 4028177959149
Manufacturer Rittal
Here only 798,43 EUR
950,13 EUR incl. VAT

Further information for Rittal 5840600 Control Cabinet 1000x1800x400 mm

General
MaterialHousing: steel sheet 1.5 mm, door: steel sheet, 2.0 mm, rear panel: steel sheet, 1.5 mm, base plates: steel sheet, 1.5 mm, mounting plate: steel sheet, 3.0 mm
Surface protectionHousing, door and rear panel: dip primed, externally powder coated, textured lacquer; mounting plate and base sheets: galvanised
ColourRAL 7035
Scope of deliveryenclosure top and sides closed, door(s), for single-door cabinets door hinge on right, reversible to left, mounting plate, base plates, rear panel, removable, locking: 3 mm double latch, 2 mounting rails 18 x 39 mm, rear panel, single-piece
Width1.000 mm
Height1.800 mm
Depth400 mm
Mounting plate dimensions (W x H)899 mm x 1.696 mm
Degree of protection IP according to EN 60 529IP 55
NEMA degree of protectionNEMA 3R, NEMA 12
Type rating according to UL 50EType 1, Type 2, Type 3, Type 3R, Type 12
IK codeIK10
Number of doors2
Base materialsteel sheet
PCF/VE (Cradle-to-Gate)415.85 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal SE 5840600 is a system single enclosure made of sheet steel, designed for individual installation in industrial environments. With dimensions W x H x D 1000 x 1800 x 400 mm, it provides sufficient space for mounting enclosures and electrical components. The enclosure consists of a single body with profiled side panels and a roof, eliminating the need for side panel mounting and increasing mounting efficiency. The front side is designed with two doors, where the hinge positions are interchangeable – in single-door variants, the hinge is standard on the right, but can be changed to the left. The doors are fitted with a foamed PU foam seal to ensure a tight seal, and feature a removable square tube frame with perforation in the 25 mm DIN grid. The lock door is equipped with a 3 mm double bar lock according to DIN 43668, which is fourfold locked, while the secondary door is additionally secured with a swing lever, providing double locking. The door opening is standard 130°, but can be toollessly extended to 180°. The hinges are fitted with screwed stops and non-removable hinge pins, ensuring secure and long-lasting operation. An automatic equipotential bonding between door and enclosure body ensures electrostatic discharge and safety.

Applications

The enclosure is designed for use in industrial plants where high mechanical stability and protection against dust, splashing water, and mechanical impacts are required. It is suitable for applications in manufacturing, automation technology, power supply, and environments with increased requirements for environmental resistance. The protection rating IP 55 according to EN 60 529 ensures protection against dust and splashing water from any direction, making it suitable for outdoor use as well. The NEMA protection ratings NEMA 3R and NEMA 12, as well as the type ratings according to UL 50E (Type 1, 2, 3, 3R, 12), highlight its suitability for industrial and weather-exposed environments. The IK code IK10 indicates high mechanical resistance against impact and shock, making it suitable for environments with mechanical stress.

Functions and Equipment in Detail

The enclosure is made of sheet steel with a wall thickness of 1.5 mm for the enclosure, rear panel, and base plates, and 2.0 mm for the doors. The mounting plate is made of 3.0 mm thick sheet steel and is C-bent on the sides. The surface of the enclosure, doors, and rear panel is dip-primed and externally powder-coated with a textured lacquer in RAL 7035. The mounting plate and base plates are galvanized, providing additional corrosion protection. The rear panel is removable and fitted with a foamed seal to ensure a tight seal. The base plates are triple-divided, removable, and replaceable, allowing flexible adaptation to different mounting requirements. The mounting plate is depth-adjustable in 25 mm increments and can be positioned using integrated plastic glides and mounting rails. An integrated mounting grid facilitates component positioning.

Technology Explained Simply

The construction of the enclosure is based on an integral structure, where the roof and side walls are made from a single piece, reducing assembly time and increasing stability. The perforation in the 25 mm DIN grid allows flexible mounting of components and accessories. The surface treatment with nanoceramic coating, electrophoretic dip priming, and powder-coated textured lacquer ensures high corrosion resistance and resistance against mineral oils, lubricants, machining emulsions, and solvents. The protection rating IP 55 means the enclosure is protected against dust and splashing water from any direction, making it suitable for use in humid or dusty environments. The NEMA protection ratings NEMA 3R (for protection against rain and splashing water) and NEMA 12 (for protection against dust and splashing water), as well as UL type ratings, emphasize its suitability for industrial applications.

Compatibility and Accessories

The enclosure is system-compatible with accessories from the VX25 system, enabling flexible expansion and adaptation to specific requirements. Suitable accessories include, among others, system chassis, levelling feet, C-profile rails, lock inserts, mounting brackets, comfort handles, support rollers, transport eyes, circuit diagram pockets, and door latches. These components can be used to adjust mounting levels, improve accessibility, or increase safety. The mounting brackets are available for both outer and inner mounting levels, allowing flexible use of mounting surfaces.

Mounting and Installation

Mounting is performed using integrated mounting rails and the mounting grid. The mounting plate is depth-adjustable in 25 mm increments, enabling precise positioning of components. The base plates are removable and can be replaced as needed. The rear panel is removable, providing easy access to the interior of the enclosure. The doors can be opened toollessly to 180°, facilitating maintenance and inspection. The hinges are fitted with screwed stops, ensuring secure mounting.

Operational Advantages

The enclosure offers high mechanical stability and resistance to environmental influences. The integral construction reduces assembly time and increases stability. The flexible mounting via the 25 mm DIN grid and the depth-adjustable mounting plate allow individual adaptation to specific requirements. The high protection rating IP 55 and NEMA certifications ensure reliable operation in demanding environments. Automatic equipotential bonding between door, rear panel, and enclosure body ensures electrostatic discharge and enhances safety. The use of galvanized base plates and a powder-coated surface in RAL 7035 ensures long service life and high corrosion resistance.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1055464
qrcode für Rittal 5840600 Control Cabinet 1000x1800x400 mm