| General |
| Model | Standard |
| Market-relevant product changes | From 01.09.2026, the TX Colocation Rack will feature new, optimised rear doors with significantly improved stability due to additional reinforcement elements and an optimised locking mechanism. |
| Material | steel sheet |
| Surface protection | Enclosure frame: dip-primed, interior assembly: painted, doors and roof: dip-primed, powder-coated, ventilated door, sheet steel |
| Basic colour | RAL 7035 |
| Colour | Housing frame and roof: RAL 7035, door: RAL 7035, handle and hinges: RAL 9005 |
| Door material thickness | 1,2 mm |
| Width | 800 mm |
| Height | 2.200 mm |
| Depth | 1.200 mm |
| Height units | 47 HE |
| Layer spacing (as delivered) | 745 mm |
| Minimum distance between mounting planes | 115 mm |
| Maximum distance between mounting planes | 341 mm |
| 19" mounting | 800 mm wide cabinet mounted on cross-braces |
| Roof type | Roof sheet, with cable entry along full cabinet depth on left and right |
| Door configuration | Ventilated doors |
| Door configuration rear | Steel sheet door, ventilated, two-part, free area in perforated sheet metal section approx. 78 % |
| Front door configuration | Steel sheet door, ventilated, aluminium-steel sheet door, ventilated, single-piece, free area in perforated sheet section approx. 78 % |
| Floor version | Open |
| Mounting type for profile rail | 19"-level front and rear |
| Load capacity | 15.000 N |
| Note | Depending on type and location of installation, the door opening angle may vary in the specific application |
The Rittal TX 5541220 is a
server rack of the TX Colocation series, specifically designed for use in large data centres. It features dimensions of 800 mm width, 2,200 mm height, and 1,200 mm depth, providing a mounting height of 47
height units (HE). The enclosure is made of
sheet steel and is finished in the base colour
RAL 7035, with doors, roof, and frame painted in this colour. The handles and hinges are finished in
RAL 9005. The doors are
ventilated, with the front door being single-piece and the rear door double-piece, each featuring a free area in the perforated section of approximately 78 %. The door hinges allow an opening angle of 130°, although the actual angle may vary depending on the installation location.
Applications
The rack is designed for installation in data centres where efficient airflow and structured cabling are required. Integrated
air baffle plates and a
partition panel on the left side of the rack ensure targeted airflow, supporting the cooling of installed IT systems. The
cable tray on the rear right side facilitates cabling and ensures orderly cable routing. The construction is designed for room climate control, ensuring optimal cooling performance through door ventilation.
Functions and Equipment in DetailThe rack is equipped with a
comfort handle VX, which integrates a numeric code lock to secure access to the contents. The
roof construction consists of a roof plate with cable entries along the full rack depth on both the left and right sides, enabling flexible and secure cable routing. The
floor construction is open, allowing the rack to be placed directly on the floor. The
profile rails are positioned at the 48,3 cm ( 19 inch ) level at the front and rear, enabling flexible device mounting. The
load capacity is 15,000 N, ensuring high load-bearing capability for heavier IT systems.
Technology Explained SimplyThe
door material thickness is 1.2 mm, providing sufficient stability while allowing ventilation. The
surface of the rack frame is dip-primed, the interior assembly is painted, while doors and roof are dip-primed and powder-coated. The
level spacing in the delivered state is 745 mm, with a minimum distance between mounting levels of 115 mm and a maximum of 341 mm. The
48,3 cm ( 19 inch ) mounting is achieved via cross-braces, enabling stable device mounting. The
rear doors were revised from 01.09.2026 with additional reinforcement elements and an optimised locking mechanism to enhance stability.
Compatibility and AccessoriesVarious accessories are available for this rack, extending its functionality. These include
TX air baffle plates horizontal in RAL9005,
TX Colo PDU/cable trays for 47 HE, as well as various
VX floor plate modules in different configurations (ventilated, closed, single-piece, double-piece) and
VX sliding plates. Additionally, a
floor mounting set for floor plate modules is available. These components allow for individual adaptation of the rack to specific requirements in data centres.
Mounting and InstallationThe rack is pre-assembled and consists of a welded, torsionally rigid frame structure made from rolled, 9-fold bent hollow profiles. The profiles are symmetrically shaped on all sides and feature a 25 mm pitch hole pattern. Mounting is achieved via integrated blind rivet nuts M6, enabling protection-rated fastening of fittings. The profiles are rounded, and horizontal profiles feature an integrated groove above the PU foam seal to protect it. Mounting levels are accessible from inside and outside, enabling space-saving installation.
Operational AdvantagesThe rack offers an immediately ready-to-use configuration tailored to the requirements of large data centres. The integrated air baffle plates and partition panel ensure optimal airflow, improving cooling of IT systems. The cable tray and cable entries in the roof simplify cabling and ensure structured, clear installation. Door ventilation supports room climate control, while the numeric code lock secures access to the contents. The high load capacity of 15,000 N allows mounting of heavy equipment, and flexible mounting via cross-braces provides stable fastening.
Scope of DeliveryThe rack is delivered with the following components: rack frame with doors and roof plate, ventilated sheet steel front door with 130° hinges, double-piece ventilated sheet steel rear door with 130° hinges, comfort handle VX with numeric code lock at front and rear, roof plate with cable entries on left and right, partition panel on the left side of the rack, 150 mm cable tray on the rear right side of the rack, 10 x cage nuts including screws, earthing accessories (delivered loose), profile rails (482.6 mm / 48,3 cm ( 19 inch )), air baffle plate, baying set (delivered loose).