| General |
| Material | Sheet steel, aluminium, front door: aluminium, 1.25 mm, rear door: sheet steel, 1.5 mm |
| Surface protection | Cabinet frame: powder-coated, internal construction: painted, rear door and roof: powder-coated, front door: aluminium, anodized, steel sheet: powder-coated |
| Basic colour | RAL 7035 |
| Colour | Housing frame, rear door and roof: RAL 7035, front door: vertical profiles silver, horizontal profiles RAL 9005, interior fitting, front ventilation grille: RAL 9005, handle and hinges: RAL 9005 |
| Width | 800 mm |
| Height | 2.450 mm |
| Depth | 1.000 mm |
| Height units | 52 HE |
| Mounting clearance to 19" plane, front/back | 87 mm / 213 mm |
| Mounting position 19" rack | Front and rear |
| Layer spacing (as delivered) | 700 mm |
| 19" mounting | Screwed to top and bottom depth brace |
| Model | Dynamic |
| Roof type | Multi-part, with lateral cable entry in depth, on both sides, prepared for fan panel |
| Door configuration rear | Steel sheet door, ventilated, vertically divided, 180° hinges |
| Front door configuration | Aluminium-steel sheet door, ventilated, single-piece, 180° hinges |
| Profile rail version | 19"-profile rails dynamic in VX IT |
| Floor version | Open |
| 19" rack configuration | 19"-level front and rear |
| Mounting type for profile rail | 19"-level front and rear |
| Load capacity | 18.000 N |
| Max. load capacity (static) according to UL 2416 per cabinet | 15.000 N |
| Note | Depending on type and location of installation, the door opening angle may vary in the specific application |
| Base material | steel sheet |
| PCF/VE (Cradle-to-Gate) | 286 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal VX IT network/server rack, type 5335816, is a
network/server rack in the
dynamic configuration, designed for use in IT infrastructures with high requirements for ventilation, mounting flexibility, and mechanical stability. The enclosure has dimensions of 800 mm width, 2,450 mm height, and 1,000 mm depth, offering an expansion length of 52
height units (HE). The
48,3 cm ( 19 inch )-plane is integrated both front and rear, enabling flexible mounting of devices on both sides of the rack. The
plane spacing is 700 mm in the standard delivery state, with mounting at the depth rails secured at top and bottom. The
profile rails are configured in the dynamic version, allowing depth-variable mounting. The
load capacity of the rack is 18,000 N, with the maximum static load capacity according to UL 2416 per rack being 15,000 N.
Applications
The rack is designed for use in data centers, server rooms, and other IT environments where efficient
ventilation and
room climate control are required. The ventilated doors with approximately 85 % free area in the perforated metal section support air circulation and contribute to heat dissipation. The
dynamic configuration enables adaptable mounting for different device heights and depths, making it particularly suitable for heterogeneous IT systems. The
multi-part roof construction with side cable entry at depth and preparation for a fan plate supports integration of cooling and ventilation systems.
Functions and Equipment in DetailThe
front door consists of aluminum (1.25 mm) and sheet steel, is ventilated, single-piece, and equipped with 180° hinges. The
rear door is made of sheet steel (1.5 mm), also ventilated, vertically divided, and fitted with 180° hinges. Both doors are equipped with a comfort handle for half cylinder and a safety locking system 3524 E. The
surface of the rack frame is powder-coated, the interior build is painted, rear door and roof are also powder-coated. The front door is anodized, the sheet steel is powder-coated. The
base color of the enclosure is RAL 7035, with the front door featuring vertical silver-colored profiles and horizontal RAL 9005. Interior build, front ventilation grille, handle, and hinges are in RAL 9005. The
floor is open, enabling flexible cable routing and mounting.
Technology Explained SimplyThe
48,3 cm ( 19 inch )-profile rails dynamic allow adaptable mounting for different devices, with the rails secured to the depth rails. The
plane spacing of 700 mm in the standard delivery state can be adjusted as needed. The
ventilation of the doors with 85 % free area in the perforated metal section ensures efficient air circulation, which is important for cooling IT devices. The
180° hinges allow full door opening, facilitating access to devices. The
stability of the rack is ensured by the welded, torsion-resistant frame structure made of 9-fold bent hollow profiles, featuring a 25-mm grid hole pattern. The
load capacity of 18,000 N makes the rack suitable for use with heavy IT systems.
Compatibility and AccessoriesThe rack is compatible with various
accessory parts that extend its functionality. These include, for example,
routing panels in various heights,
slide rails for device mounting,
connection cables for PSM systems,
cable ties and
cable clamps for cable routing. Additionally,
system lights,
busbars, and
hook-and-loop fasteners are available to facilitate installation and maintenance. The
48,3 cm ( 19 inch )-fasteners and
internal hex socket screws are included in the delivery scope and serve for secure device fastening.
Mounting and InstallationMounting is done by screwing to the depth rails at top and bottom. The
profile rails are depth-variable and can be adjusted according to device depth. The
spacers with a height of 50 mm are used to raise a roof plate above the fan outlet in the roof plate, enabling passive ventilation. The
door opening angles may vary depending on the type and location of installation, which should be considered during planning.
Operational AdvantagesThe rack offers high
ventilation efficiency through ventilated doors with 85 % free area, supporting cooling of IT devices. The
dynamic configuration of the profile rails enables flexible mounting for different device depths. The
180° hinges facilitate access to devices, while the
torsion-resistant construction ensures high mechanical stability. The
powder-coated surface provides high corrosion resistance and an attractive visual appearance. The
open floor construction enables flexible cable routing and mounting. The
compatibility with accessories extends the functionality of the rack and supports efficient installation and maintenance.