Rittal 5314175, EAN: 4028177950078

Rittal 5314175 VX IT Compartment Rack ventilated 2 doors 2x23 HE

Rittal 5314175 VX IT Compartment Rack ventilated 2 doors 2x23 HE

Lieske Part No. 1101774
Mfg Part No 5314175
EAN-Code 4028177950078
Manufacturer Rittal
Here only 2.708,83 EUR
3.223,51 EUR incl. VAT

Further information for Rittal 5314175 VX IT Compartment Rack ventilated 2 doors 2x23 HE

General
Technical datamaximum load capacity 500 kg per compartment
MaterialCabinet frame: steel sheet, 1.5 mm, roof sheet: steel sheet, 1.5 mm, floor sheet: steel sheet, 1.0 mm, front and rear doors: steel sheet, 1.5 mm, profile rails: steel sheet, 2.5 mm
Basic colourRAL 7035
ColourCabinet frame and flat parts: RAL 7035, 19" mounting surface, hinges and handles painted in RAL 9005
Width800 mm
Height2.200 mm
Depth1.000 mm
Layer spacing (as delivered)740 mm
Number of front doors2
Number of rear doors2
19" mounting2 x 23 U, including 482.6 mm (19") mounting plane, front and rear per compartment, individually, independently adjustable
Built-in PDU vertical in rear spaceVertical PDU with IEC C20 connector (max. PDU length 1,000 mm), Order no. 7979.117/.118/.217/.317/.417, Vertical PDU – CEE plug/16 A, 1~/3~, Order no. 7979.110/.111/.130/.132/.135/.210/.310/.410/.510/.230/.330/.430/.530
Built-in PDU within the 19” mounting plane19"-PDU with IEC C20 connector, part no. 7979.102/.202/.302/.402/.502, 19"-PDU – CEE plug/16 A, 1~, part no. 7979.103/.203/.303/.403/.503
ModelCompartment Rack, 2 x 23 U
Roof typeRoof sheet, single-piece, with double-sided cable routing in the middle part of the roof
Door configurationMaximum door opening angle 130°, including 2-point rod lock
Door configuration rear2-way split, ventilated
Front door configuration2-way split, ventilated
Profile rail version19" profile rails in VX IT Compartment Rack
Floor versionFloor frame with pre-mounted, extendable, two-part, closed floor plate
19" rack configuration2 x 23 U, 19"-rack front and rear, 19"-mounting rack with universal mounting brackets, front and rear, depth adjustable, pitch 12.5 mm, screwed to left and right partition walls, with integrated air guide plates, air guide plate with integrated vertical 1 U 19"-mounting cutout on right and left per compartment, additional space for internal installation or cable routing
Mounting type for profile rail19"-level front and rear
Load capacity1.000 kg
NoteDepending on type and location of installation, the door opening angle may vary in the specific application
Base materialsteel sheet
The Rittal VX 5314175 is a Compartment Rack of the VX IT series, designed for the integration of various IT applications within a common, yet physically separated housing. The housing is divided into two Installations-Compartments, each equipped with its own 48,3 cm ( 19 inch ) mounting plane at the front and rear. This construction enables separate cabling and individual configuration for each compartment, allowing different user groups or security zones to be efficiently separated. The ventilation of the doors ensures optimal cooling of installed devices, with the doors being 2-part split and equipped with a 2-point bar lock. The maximum load capacity is 500 kg per compartment, with the overall load capacity of the enclosure being 1,000 kg.

Applications

The VX IT Compartment Rack is suitable for use in data centres, server rooms or technical rooms where a clear separation of IT infrastructures is required. The separate compartments allow simultaneous use by different departments or for different applications, without physical or electrical interference. The all-round baying enables flexible placement in existing row configurations.

Functions and Equipment in Detail

The housing is pre-assembled and offers a 48,3 cm ( 19 inch ) mounting plane of 482.6 mm at the front and rear in each compartment. These mounting planes are depth-adjustable and can be adjusted independently, with a pitch of 12.5 mm. Mounting is done on the integrated partition panels on the left and right. The plane spacing is pre-set at 740 mm at delivery, but can be individually adjusted. The front and rear doors open to an angle of 130°, which may be reduced to 115° in baying. The doors are equipped with comfort handles for half cylinders, enabling security locking. The enclosure frame and door materials are made of sheet steel, with frame and door sheets having a thickness of 1.5 mm, the base sheet 1.0 mm, and the profile rails 2.5 mm. The enclosure frames and flat parts are painted in RAL 7035, while the 48,3 cm ( 19 inch ) mounting planes, hinges and handles are in RAL 9005.

Technology Explained Simply

The integrated air baffle plates in the 48,3 cm ( 19 inch ) mounting frame ensure targeted airflow to optimise device cooling. The vertical 1 HE 48,3 cm ( 19 inch ) mounting cutouts on the sides of each compartment provide additional space for internal installation or cable routing. The roof plate is single-piece and features double-sided cable routing in the middle section, facilitating top-side cabling. The base plate is two-piece, pull-out and closed, enabling easy installation and maintenance. The equipotential bonding connection is already integrated, and the housing is prepared for the attachment of earthing straps.

Compatibility and Accessories

The VX IT Compartment Rack is designed for mounting 48,3 cm ( 19 inch ) devices and supports the installation of PDU systems. Vertically in the rear space, PDUs with IEC C20 connectors (maximum length 1,000 mm) or CEE plugs/16 A (1~/3~) can be mounted. Within the 48,3 cm ( 19 inch ) mounting plane, 48,3 cm ( 19 inch ) PDUs with IEC C20 connectors or CEE plugs/16 A, 1~ are compatible. Suitable accessories include, among others, cable routing panels, glide rails, drawers, document clamps, and various PDU types, suitable for individual compartment outfitting.

Installation and Mounting

The enclosure is pre-assembled and can be installed directly. Mounting of 48,3 cm ( 19 inch ) devices is done on the pre-defined mounting profiles, which are depth-adjustable. The doors are fitted with hinges that can be reversed from right to left, allowing flexible placement. Baying is possible on all sides, enabling integration into existing row configurations.

Operational Advantages

The separate compartments offer high access security and allow individual configuration for different applications. The integrated air baffle plates and ventilated doors ensure efficient cooling. The pre-assembled equipment and depth-adjustable mounting planes reduce installation time. The equipotential bonding connection and preparation for earthing straps meet electrical safety requirements. The load capacity of 500 kg per compartment and the total load capacity of 1,000 kg make the housing suitable for demanding applications.

Dimensions

The housing has a width of 800 mm, a height of 2,200 mm, and a depth of 1,000 mm. The plane spacing is pre-set at 740 mm at delivery, but can be individually adjusted. The number of front and rear doors is 2 each.

Colour Scheme

The enclosure frames and flat parts are painted in RAL 7035, while the 48,3 cm ( 19 inch ) mounting planes, hinges and handles are in RAL 9005. This colour scheme ensures a professional appearance and is typical for IT infrastructure enclosures.

Accessories

Compatible accessories include, among others, cable routing panels, glide rails, drawers, document clamps, and various PDU models, suitable for individual compartment outfitting.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1101774
qrcode für Rittal 5314175 VX IT Compartment Rack ventilated 2 doors 2x23 HE