Rittal 5307124, EAN: 4028177944954

Rittal 5307124 server cabinet VX IT closed 42 HE

Rittal 5307124 server cabinet VX IT closed 42 HE

Lieske Part No. 1775553
Mfg Part No 5307124
EAN-Code 4028177944954
Manufacturer Rittal
Here only 1.256,61 EUR
1.495,37 EUR incl. VAT

Further information for Rittal 5307124 server cabinet VX IT closed 42 HE

General
MaterialSheet steel, aluminium, vision door: single-pane safety glass, 3 mm, front door: aluminium, 1.25 mm, rear door: sheet steel, 1.5 mm
Surface protectionCabinet frame: dip-primed, interior: painted, rear door and roof: dip-primed, powder-coated, front door: aluminium, anodized/painted
Basic colourRAL 7035
ColourCasing frame, rear door and roof: RAL 7035, front door: vertical profiles silver, horizontal profiles RAL 9005, interior: RAL 9005, handle and hinges: RAL 9005
Width800 mm
Height2.000 mm
Depth800 mm
Height units42 HE
Mounting clearance to 19" plane, front/back150 mm / 130 mm
Mounting position 19" rackFront and rear
Layer spacing (as delivered)520 mm
19" mountingScrewed to top and bottom crossbar
ModelStandard
Roof typeMulti-part, with lateral cable entry in depth, on both sides, prepared for fan panel
Door configuration rearSteel sheet door, closed, vertically divided, 180° hinges
Front door configurationAluminium front door, closed, single-piece, 180° hinges
Profile rail version19" profile rails standard in VX IT
Floor versionOpen
19" rack configurationFront and rear
Mounting type for profile rail19"-level front and rear
Load capacity8.000 N
Max. load capacity (static) according to UL 2416 per cabinet8.000 N
IK codeIK08
NoteDepending on type and location of installation, the door opening angle may vary in the specific application
Base materialsteel sheet
PCF/VE (Cradle-to-Gate)263.6 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal VX 5307124 is a network/server rack of the VX IT series in the standard configuration, designed for use in IT infrastructures, server rooms, and data centers. The enclosure has dimensions of 800 mm width, 2,000 mm height, and 800 mm depth and offers a mounting height of 42 HE. It is designed for direct rack-based climate control and features a 48,3 cm ( 19 inch ) internal build with depth-variable profile rails mounted on the front and rear planes. The 48,3 cm ( 19 inch ) mounting is secured to cross-braces at the top and bottom, with a plane spacing of 520 mm in the delivered state. The rack is suitable for use in environments with high mechanical loads, as it has a static load capacity of 8,000 N according to UL 2416 and meets the IK code IK08, providing high protection against mechanical impacts such as shock and impact.

Applications
The rack is suitable for use in IT and server environments where structured and secure mounting of network and server equipment is required. The enclosed design with an aluminum viewing door at the front and a steel sheet door at the rear offers high protection against dust, foreign objects, and unauthorized access. The viewing door is made of single-pane safety glass (3 mm) and allows visual inspection of the equipment inside without opening the door. The rear door is vertically divided and equipped with 180° hinges, enabling comfortable operation and maintenance. The front door is single-piece, also with 180° hinges, and made of aluminum (1.25 mm), anodized/painted, with vertical profiles in silver and horizontal profiles in RAL 9005. The rear door is made of steel sheet (1.5 mm) and powder-coated in RAL 7035. The enclosure frame, roof, and rear door are also in RAL 7035, while the internal build is painted in RAL 9005. The handle and hinge elements are also finished in RAL 9005.

Functions and Equipment in Detail
The rack features a multi-part roof plate equipped with side cable entries at the depth, on both sides, and is prepared for mounting a fan plate. The floor construction is open, allowing flexible installation of floor plates or component shelves. The mounting clearances are 150 mm at the front and 130 mm at the rear to the 48,3 cm ( 19 inch ) plane, providing sufficient space for cable routing and maintenance. The delivery includes 12 x 48,3 cm ( 19 inch ) fasteners 1 HE, conductive, 25 internal hexagon socket screws, conductive, and spacers for raising a cover plate above the fan opening in the roof plate to enable passive ventilation. These components are not required for variants without an opening in the roof plate. The 48,3 cm ( 19 inch ) profile rails are standard in the VX IT and allow flexible mounting of equipment.

Technology Explained Simply
The surface treatment of the rack frame is done by dip priming, the internal build is painted, while the rear door and roof are dip-primed and powder-coated. The front door is made of aluminum, anodized/painted, ensuring high corrosion resistance and optical quality. The load capacity of 8,000 N corresponds to a high mechanical protection standard and is suitable for use in industrial or commercial environments. The IK code IK08 guarantees protection against mechanical impacts such as shock and impact, which is important for use in environments with increased mechanical stress. The 48,3 cm ( 19 inch ) mounting on cross-braces at the top and bottom ensures stable mounting of equipment and prevents shifting under load.

Compatibility and Accessories
The rack is compatible with a wide range of accessory parts that enhance functionality and adaptability. These include VX plinth corner pieces with plinth trim panel, routing panels, cable managers, component shelves, drawers, cable ducts, glide rails, cable routing trough panel, elastic clamp profiles IP55, socket strips, magnetic label frames, document clips, VX castors, and VX levelling elements. These components allow individual adaptation to specific requirements such as cable management, equipment mounting, floor installation, or transport.

Mounting and Installation
Mounting is done via the provided 48,3 cm ( 19 inch ) profile rails, mounted on the front and rear planes. The 48,3 cm ( 19 inch ) mounting secured to cross-braces at the top and bottom ensures stable and secure mounting. The spacers included in the delivery allow raising a cover plate above the fan opening in the roof plate to enable passive ventilation. The open floor construction allows installation of additional floor plates or component shelves. The 180° hinges on the front and rear doors facilitate mounting and maintenance of equipment inside.

Operational Advantages
The rack offers high mechanical stability and load capacity, making it suitable for demanding environments. The enclosed design with viewing door and steel sheet door provides high protection against dust, foreign objects, and unauthorized access. The integrated 48,3 cm ( 19 inch ) profile rails and 48,3 cm ( 19 inch ) mounting enable flexible and stable mounting of equipment. The side cable entries in the roof plate simplify cable routing and fan integration. The compatibility with various accessories increases adaptability to specific requirements. The surface treatment ensures high corrosion resistance and optical quality. The load capacity of 8,000 N and IK code IK08 guarantee a high protection standard, which is important for use in industrial or commercial environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1775553
qrcode für Rittal 5307124 server cabinet VX IT closed 42 HE