Rittal 5306190, EAN: 4028177944930

Rittal 5306190 server cabinet VX IT closed IP55 42HE

Rittal 5306190 server cabinet VX IT closed IP55 42HE

Lieske Part No. 1775555
Mfg Part No 5306190
EAN-Code 4028177944930
Manufacturer Rittal
Here only 851,46 EUR
1.013,24 EUR incl. VAT

Further information for Rittal 5306190 server cabinet VX IT closed IP55 42HE

General
MaterialSheet steel, aluminium, vision door: single-pane safety glass, 3 mm, front door: aluminium, 1.25 mm, rear door: sheet steel, 1.5 mm
Surface protectionCabinet frame: dip-primed, rear door and roof: dip-primed, powder-coated, front door: aluminium, anodized/painted
Basic colourRAL 7035
ColourHousing frame, rear door and roof: RAL 7035, front door: vertical profiles, silver, and horizontal profiles RAL 9005, handle and hinges: RAL 9005
Width800 mm
Height2.000 mm
Depth600 mm
Height units42 HE
Roof typeOne-piece, closed
Door configuration rearSteel sheet door, closed, single-piece, 130° hinges
Front door configurationAluminium front door, closed, single-piece, 180° hinges
Profile rail versionNone
Floor versionfloor tray with floor plate, multi-part, closed
Mounting type for profile railNone
Degree of protection IP according to EN 60 529IP 55 only in combination with gasket for rowing or screwed side walls
IK codeIK08
NoteDepending on type and location of installation, the door opening angle may vary in the specific application
Base materialsteel sheet
PCF/VE (Cradle-to-Gate)223.7 kg CO2 eq (Cat B)
Note on PCF classCategory B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared
The Rittal VX 5306190 is a network/server rack of the VX IT series, designed as a blank enclosure without pre-installed 48,3 cm ( 19 inch ) internal mounting. It is intended for the protected installation of IT and electronics components in environments requiring enhanced protection. The enclosure has dimensions of 800 mm width, 2000 mm height, and 600 mm depth, and includes 42 height units (HE). The construction is designed for direct rack-based climate control and offers a protection rating IP 55, which is only achieved in combination with a baying seal or screwed side panels. The rack is made of sheet steel, with the front door made of aluminium and equipped with a single-pane safety glass (3 mm) as a viewing door. The rear is covered by a solid sheet steel door.

Applications
This rack is suitable for use in IT infrastructures, server rooms, data centres, or industrial environments where high mechanical stability and protection against dust and splashing water are required. The IK08 rating ensures high mechanical protection against impact. The blank enclosure design allows for individual internal configuration, with devices and modules able to be mounted directly onto the integrated blind rivet nuts M6. The horizontal perforation in a 25 mm grid, along with square-shaped holes on all sides, facilitates the installation of cage nuts and metric screws up to M8.

Functions and Equipment in Detail
The front aluminium viewing door is fitted with 180° hinges, allowing full opening. The rear sheet steel door opens 130° and is also designed as a single unit. Both doors are equipped with comfort handles for half cylinders, ensuring secure and convenient operation. The rack frame surface is dip-primed, while the rear door and roof are powder-coated. The front door is anodized/painted, with vertical profiles in silver and horizontal profiles in RAL 9005. The handles and hinges are also painted in RAL 9005. The enclosure frame, rear door, and roof are in the base colour RAL 7035.

Technology Explained Simply
The rack features a torsionally rigid, welded frame structure made from rolled, 9-fold bent closed hollow profiles. The integrated blind rivet nuts M6 allow secure mounting of fittings without compromising the protection rating. The horizontal profiles have an integrated groove above the PU foam seal to protect it from mechanical damage. The base sheet is multi-part and closed, with the base frame incorporating reinforcements to enable direct screwing of the rack to the floor from the inside. The seal for the base sheet and the baying seal are included in the delivery scope.

Compatibility and Accessories
The rack is designed for mounting 48,3 cm ( 19 inch ) equipment, with 12 pre-installed 48,3 cm ( 19 inch ) fasteners (1 HE, conductive) included in the delivery. Additionally, 25 conductive hex socket screws are provided. For individual configuration, various accessories are available, including insert modules such as PSM socket modules, connection cables, cable ties, Velcro fasteners, system lights, and component shelves. These components can be added as required to adapt the rack’s functionality to specific applications.

Mounting and Installation
Mounting is performed via the integrated mounting levels on the frame, accessible from both inside and outside. The base tray allows for secure fastening to the floor. The baying seal and seal set for the base sheet are included to ensure the IP 55 protection rating. Door opening angles may vary depending on the type and location of installation, so the actual opening should be checked in the specific application.

Operational Advantages
The rack offers high mechanical stability and protection through the IK08 rating. The viewing door allows visual inspection of installed components without opening the door. The integrated mounting elements and conductive screws support safe and efficient installation. The blank enclosure design provides flexibility for individual configuration and adaptation to specific requirements. The use of sheet steel and aluminium ensures high strength and durability of the enclosure.

Delivery Scope
The rack is delivered with the rack frame, front aluminium viewing door (180° hinges), rear sheet steel door (130° hinges), roof plate (single-piece, closed), base tray with base sheet (multi-part, closed), baying seal, seal set for base sheets, 12 x 48,3 cm ( 19 inch ) fasteners (1 HE, conductive), and 25 hex socket screws (conductive). Delivery is on an IPPC pallet.

Certifications
The rack is UL- and C-UL-certified (listed) and includes a negative certificate. A declaration of conformity according to EU directives is also available. The product description corresponds to the manufacturer’s website and technical data sheets.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1775555
qrcode für Rittal 5306190 server cabinet VX IT closed IP55 42HE