| General |
| Applications | For cable routing and strain relief of guided cables on VX frame structure |
| Material | steel sheet |
| Surface protection | Zinc-plated |
| Scope of delivery | Including mounting hardware |
| Mounting options | Direct screw connection between the vertical frames of the cabinet frame |
| Suitable for | Housing type: VX, VX IT, TX CableNet, width: = 600 mm, depth: = 600 mm |
| Suitable for width | = 600 mm |
| PCF/VE (Cradle-to-Gate) | 5.7 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal combination rail VX 5302020 is a system accessory for enclosures of type VX, VX IT and TX CableNet. It is designed for structured cable routing and strain relief on the frame unit of the enclosure frame. The rail is specifically designed for enclosures with a width of 600 mm and a depth of 600 mm. Its use enables orderly fastening and routing of cables, thereby reducing mechanical stress caused by tensile forces.
Applications
The combination rail is used in industrial and technical environments where secure and structured cabling within the enclosure is required. It is particularly suitable for installations in which cables are routed over long distances and strain relief is necessary to prevent damage to the cables or connection technology. The rail can be mounted on both the outer and inner side of the enclosure frame, enabling flexible arrangement.
Functions and equipment in detail
The rail consists of a C-profile rail system equipped with cable clips to secure cables. Additionally, it integrates a cable routing rail with hammer heads, enabling orderly cable guidance. Cables can be secured using cable clips, cable ties or hook-and-loop fasteners to avoid tensile forces. The rail is made of sheet steel and features a galvanized surface providing corrosion protection.
Technology explained simply
The combination rail combines two functions in one component: cable securing via a C-profile rail with integrated cable clips, and cable guidance along the rail with hammer heads. This design enables simultaneous strain relief and structured cable routing. The galvanized surface protects the sheet steel from corrosion, which is particularly important in industrial environments. Installation is done by direct screwing between the vertical posts of the enclosure frame, ensuring a stable fixation.
Compatibility and accessories
The combination rail is compatible with enclosure types VX, VX IT and TX CableNet, where the enclosure width and depth must each be 600 mm. As accessories, cable ties with a length of 150 mm and mounting brackets for VX combination rail are available, enabling additional securing or adjustment of the rail. These components can be used additionally to further optimize cable routing.
Installation and mounting
Mounting is done by direct screwing between the vertical posts of the enclosure frame. The rail can be installed either inside or outside the frame, allowing flexible positioning. Installation requires no special tools other than a screwdriver or suitable wrench.
Advantages in operation
The combination rail provides reliable strain relief for cables, extending the service life of the cabling and increasing the reliability of the installation. The integrated cable routing ensures clear and orderly cabling, simplifying maintenance and inspection. The galvanized surface ensures high corrosion resistance, extending the service life in industrial environments. The use of cable ties, cable clips or hook-and-loop fasteners enables flexible and adaptable cable securing.
The packaging unit contains 4 pieces of the combination rail. The net weight is 1.508 kg per packaging unit. Product identification is done via manufacturer number 5302020 and type VX 5302020. The PCF values (Cradle-to-Gate) are 5.7 kg CO2 eq per packaging unit, with category B marked as approximately calculated and self-declared.