| General |
| Applications | For separating cold/warm zones within a cabinet in case of gang enclosure or when using an LCP system. |
| Material | Steel sheet, blank panel: plastic, UL 94-HB, halogen-free, brush strip: plastic, UL 94-HB |
| Surface protection | Painted |
| Colour | RAL 9005 |
| Scope of delivery | 2 vertical panels, 2 horizontal panels, 4 brush strips, 4 cell-PU-foam pieces, including fastening material |
| Suitable for | Width: = 600 mm, Height: = 2,450 mm |
| PCF/VE (Cradle-to-Gate) | 9.6 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal air baffle plate DK 5302008 is a modular partition element for enclosures, specifically designed for use with VX IT 48,3 cm ( 19 inch ) profile rails dynamic. It serves to selectively separate cold and hot zones within an enclosure, particularly in applications involving gang enclosure or the use of an LCP system. The function aims to improve the energy efficiency of climate control by preventing unwanted air circulation between the zones.
Applications
The air baffle plate is designed for enclosures with a width of 600 mm and a height of 2,450 mm. It is used in environments where targeted air guidance is required to optimize cooling performance and enhance the efficiency of climate control systems. Applications are particularly common in data centers or industrial environments with high requirements for thermal control.
Functions and Equipment in Detail
The product consists of two vertical and two horizontal panels made of sheet steel, coated with a painted surface in RAL 9005. The panels are equipped with brush strips made of plastic (UL 94-HB, halogen-free), enabling collision-free partitioning, even when rail systems are installed on the outer mounting plane. The brush strips provide a tight yet flexible seal, minimizing air circulation between the zones. Additionally, four cell-PU foam pieces are included in the delivery, contributing to sealing and stabilizing the installation.
Technology Explained Simply
The vertical panels can be mounted on both front and rear 48,3 cm ( 19 inch ) profile rails, while the horizontal panels can only be attached to the front rails. The integrated 48,3 cm ( 19 inch ) mounting cutouts (482.6 mm) allow for optional use of plastic blanking panels (UL 94-HB, halogen-free) for closure, or they can be used for installing additional components or cable routing. Mounting is carried out using the included material, specifically designed for attachment to the profile rails.
Compatibility and Accessories
The air baffle plate is specifically designed for the VX IT 48,3 cm ( 19 inch ) profile rail dynamic. It is compatible with enclosure configurations using these rails. Suitable accessories include the DK expansion set earthing for TS IT and 48,3 cm ( 19 inch ) fasteners 1 HE with contact (24 pieces), which can be used to extend functionality or for electrical earthing.
Mounting and Installation
Installation is carried out on the designated 48,3 cm ( 19 inch ) profile rails. Vertical panels can be fastened to both front and rear rails, while horizontal panels must only be mounted on the front rails. The brush strips ensure a flexible yet tight seal. The integrated mounting cutouts can be sealed with the included blanking panels as needed, or used for installing additional components.
Operational Advantages
By selectively separating air flows, the cooling performance of climate control systems is improved, resulting in higher energy efficiency. The brush strips allow for flexible installation, even with already installed rail systems, without collisions or mechanical interference. The use of halogen-free plastic and UL 94-HB certified materials ensures a safe and flame-retardant design. The painted surface in RAL 9005 provides a robust and visually uniform appearance.