| General |
| Applications | For separating cold/warm zones within a cabinet in case of gang enclosure or when using an LCP system. |
| Material | Steel sheet, blank panel: plastic, UL 94-HB, halogen-free, brush strip: plastic, UL 94-HB |
| Surface protection | Painted |
| Colour | RAL 9005 |
| Scope of delivery | 2 vertical panels, 2 horizontal panels, 4 brush strips, 4 cell-PU-foam pieces, including fastening material |
| Suitable for | Width: = 600 mm, Height: = 2,200 mm |
| PCF/VE (Cradle-to-Gate) | 11.1 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal air baffle plate DK 5302006 is a specially designed component for separating cold and hot zones within an enclosure, particularly when using row containment or when employing an LCP system. It serves to specifically enhance the energy efficiency of climate control systems in server and IT enclosures. The product is designed for enclosures with a width of 600 mm and a height of 2,200 mm and is mounted on the 48,3 cm ( 19 inch ) profile rails of the VX IT dynamic system. The surface is painted and finished in RAL 9005, enabling a uniform visual appearance within the enclosure.
Applications
The air baffle plate is used to specifically control airflow within an enclosure. It prevents the mixing of cold and warm air, which is particularly beneficial when using LCP systems (fan and cooling plate systems) or row containment systems. This optimizes cooling performance and increases the efficiency of climate control. Separating air zones contributes to reducing energy losses and supports the thermal stability of installed devices.
Functions and Equipment in Detail
The product consists of two vertical and two horizontal panels made of sheet steel, equipped with brush strips made of plastic (UL 94-HB, halogen-free). These brush strips enable a collision-free partition, even when rail systems are installed on the outer mounting plane. Additionally, four cell-PU foam pieces are included in the delivery scope, serving for sealing and preventing air leakage at the edges of the panels. The panels feature integrated 48,3 cm ( 19 inch ) mounting cutouts, which can optionally be closed with the included blanking panels to allow installation of additional components or for cable routing.
Technology Explained Simply
The vertical panels with brush strips can be mounted on both front and rear 48,3 cm ( 19 inch ) profile rails, while the horizontal panels can only be mounted on the front rails. The brush strips made of halogen-free plastic (UL 94-HB) ensure a secure and tight partition without mechanical collisions with installed components. The cell-PU foam pieces provide additional sealing at the edges, increasing the air-tightness of the partition. The materials are suitable for use in IT and electrical installations and comply with common safety standards.
Compatibility and Accessories
The air baffle plate is specifically developed for the VX IT 48,3 cm ( 19 inch ) profile rail dynamic and is compatible with enclosures having a width of 600 mm and a height of 2,200 mm. Suitable accessories include the DK expansion set earthing for TS IT and 48,3 cm ( 19 inch ) fasteners 1 U with contact (24 pieces). These components can be used to extend earthing functionality or for secure mounting of devices on the rails. Installation is carried out using the included mounting hardware.
Installation and Mounting
Mounting is performed on the 48,3 cm ( 19 inch ) profile rails of the VX IT dynamic system. The vertical panels can be attached to front and rear rails, while the horizontal panels are mounted exclusively on the front rails. The integrated mounting cutouts allow flexible use for additional components or cable routing. The brush strips and cell-PU foam pieces ensure a tight partition, enabling targeted control of airflow within the enclosure.
Operational Advantages
By specifically separating cold and hot zones, the cooling performance of the climate control system is optimized. This leads to higher energy efficiency and reduced energy consumption. The brush strips ensure a collision-free partition, even on occupied mounting planes, simplifying installation and maintenance. The integrated mounting cutouts offer flexibility for installing additional components or for cable routing. The product is made from robust materials suitable for use in IT and electrical installations.
Delivery Scope
The delivery includes: 2 vertical panels, 2 horizontal panels, 4 brush strips, 4 cell-PU foam pieces, and the required mounting hardware. The components are designed to enable a tight and collision-free partition within the enclosure.