| General |
| Scope of delivery | 4 casters including mounting brackets, including mounting hardware |
| Height | 58 mm |
| Height (note) | Total height = cabinet height + 58 mm |
| Mounting note | The floor area must be open at the mounting points |
| Load capacity | Max. static load: 2000 N per roller set including housing |
The Rittal Transport-Kit VX 5301515 is an accessory set for the mobile transportation of VX empty enclosures. It enables simple and secure movement of empty enclosures from storage or shipping location to the installation site, without requiring additional transport equipment or aids. The kit is specifically designed for the VX enclosure series and allows efficient handling during the assembly and installation phase.
Applications
The Transport-Kit is primarily used in industrial and commercial environments where enclosures or empty housings must be assembled or positioned at various locations. It is particularly useful in electrical installation, during the assembly of control and distribution enclosures, and in manufacturing, where flexible positioning of enclosures is required. The swivel castors enable manual movement of enclosures over flat surfaces, thereby reducing physical strain on the installer.
Functions and Equipment in Detail
The kit includes four swivel castors, each equipped with mounting brackets. These brackets are used for secure attachment to the designated mounting points on the base of the VX empty enclosure. Additionally, mounting hardware is included in the delivery scope, which is necessary for installing the castors. The swivel castors are designed to enable safe and directed movement of the enclosure, with the rotational capability of the castors ensuring flexible steering.
Technology Explained Simply
The overall height of the enclosure increases by 58 mm once the Transport-Kit is mounted, as the castors provide a corresponding lift height. This value is critical for planning the mounting height and positioning of the enclosure in the operational environment. The maximum static load is 2000 N per castor set, defining the load capacity of the entire kit including the enclosure weight. This corresponds to a load of approximately 204 kg per castor set, with the total load distributed across all four castors. Installation requires that the base area of the enclosure is open at the mounting points to allow for attachment of the brackets and castors.
Compatibility and Accessories
The Transport-Kit is specifically designed for VX empty enclosures, including the VX IT series. It is not intended for other enclosure types, as the mounting points and construction are tailored to the specific dimensions and mounting points of the VX series. Use with other enclosure models is not guaranteed and may result in damage or instability.
Mounting and Installation
Installation is carried out by attaching the four swivel castors to the designated points on the base of the enclosure. The mounting brackets are attached to the enclosure, and the castors are mounted using the included mounting hardware. The mounting points must be accessible, meaning the base area of the enclosure must not be sealed or obstructed by other components at these locations.
Advantages in Operation
Using the Transport-Kit reduces physical effort when moving heavy enclosures. The swivel castors enable precise and controlled movement, minimizing the risk of damage to the enclosure or floor covering. The integrated mounting solution ensures secure installation that does not loosen during transport. The maximum load capacity of 2000 N per castor set ensures sufficient stability for most standard enclosure configurations.