| General |
| Model | Two-piece, with brush bar |
| Material | Module sheet: steel sheet, brush strip: plastic, UL 94-HB, halogen-free, two-part, with brush strip |
| Surface protection | Module sheet: galvanised |
| Scope of delivery | 2 module sheet halves including brush bar, high-density, including fastening material |
| Mounting note | Combining multiple floor plate modules is necessary to fully close the floor in VX IT; the floor plate module can be combined with other floor modules with a depth of 237.5 mm |
| Note | Base plate modules with brush strip not suitable for applications with degree of protection according to IEC 60 529 |
| Depth | 237,5 mm |
| Suitable for | Enclosure type: VX IT, width: = 800 mm |
| PCF/VE (Cradle-to-Gate) | 8.2 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal VX 5301335 is a
floor plate module for enclosures of type VX IT, specifically designed for a width of 800 mm. It is intended for targeted cable entry from below into the enclosure and is supplied as a
two-piece module, allowing it to be retrofitted even when cables are already installed. The version with
brush strip ensures higher sealing against the environment, supporting climate control within the enclosure. The brush strip is made of
plastic, is
halogen-free, and complies with flammability class
UL 94-HB. The module plate itself is made of
sheet steel and is
zinc-coated to prevent corrosion. The depth of the module is 237.5 mm, making it compatible with other floor modules of the same depth.
Applications
This floor plate module is intended for use in VX IT enclosures, particularly in installations where targeted and sealed cable entry from below is required. The two-piece construction allows for flexible installation, even when cables are already routed in the enclosure. The brush strip provides improved air tightness, which is especially beneficial in environments with controlled climate conditioning. However, it is not suitable for applications requiring a protection rating according to IEC 60 529, as the brush strip does not provide sufficient mechanical or waterproof sealing.
Functions and Equipment in Detail
The module consists of two halves, each integrating a brush strip. The brushes are alternately offset to achieve optimal sealing performance. The brush strip is designed for high density to minimize air and dust ingress. The module plate is zinc-coated, ensuring high corrosion resistance. The delivery includes both module plate halves with brush strip, as well as the required
mounting hardware. Installation is carried out by securing the module to the enclosure's base plate.
Technology Explained Simply
The brush strip functions as a mechanical seal, with the alternately offset bristles providing a tight fit around the cable or cable bundle. With proper cable entry, this achieves high air tightness, improving the efficiency of climate control within the enclosure. The zinc-coated surface of the sheet steel protects against corrosion, especially in humid or aggressive environments.
Compatibility and Accessories
The module is specifically designed for VX IT enclosures with a width of 800 mm. It can be combined with other floor modules with a depth of 237.5 mm to cover the entire floor area. Combining multiple modules is necessary to fully seal the floor in VX IT enclosures. It is not compatible with modules for other enclosure types or widths.
Installation and Mounting
Installation is performed by securing the two module halves to the base plate of the enclosure. The included mounting hardware is used for this purpose. The two-piece construction allows for flexible adaptation to already installed cables. The brush strip must be positioned so that it tightly encloses the cables to ensure effective sealing.
Operational Advantages
Using the floor plate module with brush strip enables targeted and sealed cable entry, controlling air circulation within the enclosure. This supports climate conditioning and can extend the service life of installed equipment. The zinc-coated surface ensures high corrosion resistance, enhancing the long-term stability of the module. The two-piece design simplifies installation, especially in existing installations, and reduces mounting effort.